Hi, On Wednesday, August 31, 2016 08:59:21 PM Randy Li wrote: > The TOPEET itop exynos 4412 have three versions base board. The > Elite version is the cheap one without too much peripheral devices > on it. > > Currently supported are serial console, wired networking(USB), > USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, > PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also > enabled. > > The FIMC is not used for camera currently, I enabled it just for a > colorspace convertor. > > Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx> [...] > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ > exynos4412-origen.dtb \ > exynos4412-smdk4412.dtb \ > exynos4412-tiny4412.dtb \ > + exynos4412-itop-elite.dtb \ Minor nit: Please keep dtb files in alphabetical order. > exynos4412-trats2.dtb > dtb-$(CONFIG_ARCH_EXYNOS5) += \ > exynos5250-arndale.dtb \ Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |