Hi Andi,
2016-06-27 22:03 GMT+09:00 Andi Shyti <andi.shyti@xxxxxxxxxxx>:
> enable SPI3 iosclk by using the CLK_IS_CRITICAL flag.
s/iosclk/ioclk
> There is no device which is supposed to enable this clock when
> needed, therefore, the only way to use the SPI bus is to enable
> it in boot time.
>
> Suggested-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> ---
>
> Hi,
>
> V1 -> V2
>
> - the "sclk_spi3" doesn't need to be enabled in boot time as it
> is handled by the spi driver itself.
>
> - use the CLK_IS_CRITICAL flag for the ioclk
>
> Andi
>
> drivers/clk/samsung/clk-exynos5433.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index dcb4391..c33150e 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -1641,7 +1641,8 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
> GATE(CLK_SCLK_IOCLK_SPI4, "sclk_ioclk_spi4", "ioclk_spi4_clk_in",
> ENABLE_SCLK_PERIC, 21, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in",
> - ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0),
> + ENABLE_SCLK_PERIC, 20,
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
> 19, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,
Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
