Hello Krzysztof,
On 05/31/2016 10:00 AM, Krzysztof Kozlowski wrote:
> When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe
> finishes with success but uses invalid (ERR_PTR) values. This leads to
> dereferencing of ERR_PTR stored under ourport->clk:
>
> 12c30000.serial: Controller clock not found
> (...)
> 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
> Unable to handle kernel paging request at virtual address fffffdfb
>
> (clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128)
> (s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40)
> (uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c)
> (uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418)
> (s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0)
> (platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0)
> (driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c)
> (bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100)
> (__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c)
> (bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c)
> (deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328)
> (process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac)
> (worker_thread) from [<c0135320>] (kthread+0xd8/0xf4)
> (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c)
>
> The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to
> exit with failure but the s3c24xx_uart_port is left half-configured
> (e.g. port->mapbase is set, clk contains ERR_PTR). On next re-probe,
> the function s3c24xx_serial_init_port() will exit early with success
> because of configured port->mapbase and driver will use old values,
> including the ERR_PTR as clock.
>
> Fix this by cleaning the port->mapbase on error path so each re-probe
> will initialize all of the port settings.
>
> Fixes: 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
>
> ---
>
Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
