Switch the control of buck8 to GPIO mode. It is faster than I2C/register mode and it is the easiest way to disable it (regulator state is a logical OR state of GPIO and register value). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index d73aa6c58fe3..31cdc036fda4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -74,6 +74,7 @@ regulator-name = "BUCK8_P3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + maxim,ena-gpios = <&gpa1 1 GPIO_ACTIVE_HIGH>; }; /* VDDQ for MSHC (eMMC card) */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |