Hello,
On 2016-04-28 15:29, Hans Verkuil wrote:
On 04/28/2016 03:20 PM, Marek Szyprowski wrote:
This patch lets vb2-dma-contig memory allocator to configure DMA max
segment size properly for the client device. Setting it is needed to let
DMA-mapping subsystem to create a single, contiguous mapping in DMA
address space. This is essential for all devices, which use dma-contig
videobuf2 memory allocator and shared buffers (in USERPTR or DMAbuf modes
of operations).
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Should this go in for 4.7? (might be too late) Should this go into older
kernels as well?
Yes, please queue it to v4.7 if possible.
It might be a good idea to backport this to older kernels, but at least
in case of Exynos there are still other issues, which prevent using all
multimedia drivers with IOMMU enabled (caused by Exynos MFC device special
needs).
Regards,
Hans
---
Hello,
This patch is a follow-up of my previous attempts to let Exynos
multimedia devices to work properly with shared buffers when IOMMU is
enabled:
1. https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg96946.html
2. http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/97316
3. https://patchwork.linuxtv.org/patch/30870/
As sugested by Hans, configuring DMA max segment size should be done by
videobuf2-dma-contig module instead of requiring all device drivers to
do it on their own.
Here is some backgroud why this is done in videobuf2-dc not in the
respective generic bus code:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/305913.html
Best regards,
Marek Szyprowski
changelog:
v2:
- fixes typos and other language issues in the comments
v1: http://article.gmane.org/gmane.linux.kernel.samsung-soc/53690
---
drivers/media/v4l2-core/videobuf2-dma-contig.c | 39 ++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
index 461ae55eaa98..d0382d62954d 100644
--- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
+++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
@@ -443,6 +443,36 @@ static void vb2_dc_put_userptr(void *buf_priv)
}
/*
+ * To allow mapping the scatter-list into a single chunk in the DMA
+ * address space, the device is required to have the DMA max segment
+ * size parameter set to a value larger than the buffer size. Otherwise,
+ * the DMA-mapping subsystem will split the mapping into max segment
+ * size chunks. This function increases the DMA max segment size
+ * parameter to let DMA-mapping map a buffer as a single chunk in DMA
+ * address space.
+ * This code assumes that the DMA-mapping subsystem will merge all
+ * scatter-list segments if this is really possible (for example when
+ * an IOMMU is available and enabled).
+ * Ideally, this parameter should be set by the generic bus code, but it
+ * is left with the default 64KiB value due to historical litmiations in
+ * other subsystems (like limited USB host drivers) and there no good
+ * place to set it to the proper value. It is done here to avoid fixing
+ * all the vb2-dc client drivers.
+ */
+static int vb2_dc_set_max_seg_size(struct device *dev, unsigned int size)
+{
+ if (!dev->dma_parms) {
+ dev->dma_parms = kzalloc(sizeof(dev->dma_parms), GFP_KERNEL);
+ if (!dev->dma_parms)
+ return -ENOMEM;
+ }
+ if (dma_get_max_seg_size(dev) < size)
+ return dma_set_max_seg_size(dev, size);
+
+ return 0;
+}
+
+/*
* For some kind of reserved memory there might be no struct page available,
* so all that can be done to support such 'pages' is to try to convert
* pfn to dma address or at the last resort just assume that
@@ -499,6 +529,10 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
return ERR_PTR(-EINVAL);
}
+ ret = vb2_dc_set_max_seg_size(dev, PAGE_ALIGN(size + PAGE_SIZE));
+ if (!ret)
+ return ERR_PTR(ret);
+
buf = kzalloc(sizeof *buf, GFP_KERNEL);
if (!buf)
return ERR_PTR(-ENOMEM);
@@ -675,10 +709,15 @@ static void *vb2_dc_attach_dmabuf(struct device *dev, struct dma_buf *dbuf,
{
struct vb2_dc_buf *buf;
struct dma_buf_attachment *dba;
+ int ret;
if (dbuf->size < size)
return ERR_PTR(-EFAULT);
+ ret = vb2_dc_set_max_seg_size(dev, PAGE_ALIGN(size));
+ if (!ret)
+ return ERR_PTR(ret);
+
buf = kzalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
return ERR_PTR(-ENOMEM);
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
