The clk_prepare_enable() function can fail so check the return
value and propagate the error in case of a failure.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 4b873fe9a75b..cb40a3af46e7 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1196,7 +1196,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
/* initialise the i2c controller */
- clk_prepare_enable(i2c->clk);
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "I2C clock enable failed (%d)\n", ret);
+ return ret;
+ }
+
ret = s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
if (ret != 0) {
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
