On Fri, Apr 15, 2016 at 06:04:47PM -0400, Javier Martinez Canillas wrote:
> The exynos5 I2C controller driver always prepares and enables a clock
> before using it and then disables unprepares it when the clock is not
> used anymore.
>
> But this can cause a possible ABBA deadlock in some scenarios since a
> driver that uses regmap to access its I2C registers, will first grab
> the regmap lock and then the I2C xfer function will grab the prepare
> lock when preparing the I2C clock. But since the clock driver also
> uses regmap for I2C accesses, preparing a clock will first grab the
> prepare lock and then the regmap lock when using the regmap API.
>
> An example of this happens on the Exynos5422 Odroid XU board where a
> s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers
> share the same I2C regmap.
>
> The possible deadlock is reported by the kernel lockdep:
>
> Possible unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(sec_core:428:(regmap)->lock);
> lock(prepare_lock);
> lock(sec_core:428:(regmap)->lock);
> lock(prepare_lock);
>
> *** DEADLOCK ***
>
> Fix this by only preparing the clock on probe and {en,dis}able in the
> rest of the driver.
>
> This patch is similar to commit 34e81ad5f0b6 ("i2c: s3c2410: fix ABBA
> deadlock by keeping clock prepared") that fixes the same bug in other
> driver for an I2C controller found in Samsung SoCs.
I wish this would be fixed by introducing more granular clock locks
(e.g. per controller) instead of implementing another workaround.
I think this driver shouldn't care about this deadlock... although I see
that this is the simplest solution for now.
>
> Reported-by: Anand Moon <linux.amoon@xxxxxxxxx>
> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>
> ---
>
> drivers/i2c/busses/i2c-exynos5.c | 20 +++++++++++++++-----
> 1 file changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> index b29c7500461a..602633747149 100644
> --- a/drivers/i2c/busses/i2c-exynos5.c
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -671,7 +671,9 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
> return -EIO;
> }
>
> - clk_prepare_enable(i2c->clk);
> + ret = clk_enable(i2c->clk);
> + if (ret)
> + return ret;
>
> for (i = 0; i < num; i++, msgs++) {
> stop = (i == num - 1);
> @@ -695,7 +697,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
> }
>
> out:
> - clk_disable_unprepare(i2c->clk);
> + clk_disable(i2c->clk);
> return ret;
> }
>
> @@ -799,6 +801,10 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, i2c);
>
> + clk_disable(i2c->clk);
> +
> + return 0;
> +
> err_clk:
> clk_disable_unprepare(i2c->clk);
> return ret;
> @@ -810,6 +816,8 @@ static int exynos5_i2c_remove(struct platform_device *pdev)
>
> i2c_del_adapter(&i2c->adap);
>
> + clk_unprepare(i2c->clk);
> +
> return 0;
> }
Please unprepare the clock when suspending. There is no point of having
it prepared in that level.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
