On 31.03.2016 11:47, Chanwoo Choi wrote: > This patchset add the support for Device Tree source for Samsung ARTIK5 module[1] > based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes > the follwoing devices: > - Application Processor (Samsung Exynos3250) > - WiFi/BT Combo chip > - PMIC (Samsung S2MPS14) > - eMMC (4GB) > - DRAM LPDDR3 (512MB) > - Connectors pin (60 Pins x 3 set) > > Also, this patchset add the ARTIK5 development board[2] dts file which includes > the ARTIK5 module[1] and have the devices such as sound codec, sd card port, > ethernet port, uart port and so on. > > [1] https://www.artik.io/hardware/artik-5 > [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102 > > Changes from v3: > (https://lkml.org/lkml/2016/3/15/71) > - Add acked-by tag from Rob Herring <robh@xxxxxxxxxx> (patch8) > - Fix typo on patch descritpion (patch8) > - Make the separate patch for including the new clock id > for both MMC2 and UART2 device (patch2) > > Changes from v2: > (https://lkml.org/lkml/2016/3/14/910) > - Add reviewed tag by Krzysztof Kozlowski for all patches > - Include the separate patch1[3] in patchset because patch5 depend on patch1[3] > [3] https://lkml.org/lkml/2016/3/14/245 > - Fix the order issue in exynos3250-artik5.dtsi > - Use lowercase for hex address in exynos3250-artik5.dtsi > > Changes from v1: > (https://lkml.org/lkml/2016/3/13/215) > - Change the board name from 'artik5-devel' to 'artik5-eval' > - Merge the patch6/7/8 to patch5 > - Add the new board information to samsung-boards.txt[1] > [1] Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > - Fix minor coding style issue and remove 'wakeup' property > - Remove 'broken-cd' and 'desc-num' property from mshc_0 node > - Handle the LDO11/LDO12 by using XMMC0CDn pin (GPK0-2 gpio) for MMC device > and fix the ldo number of 'vmmc-supply' property. > - Add the 'vqmmc-supply' property for MSHC2 > - Drop the patch10 for PPMU node > - Add the new patch to initialize the MMC2 gpio pin on monk board > > Chanwoo Choi (6): > ARM: dts: Add initial pin configuration for exynos3250-rinato > dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250 > clk: samsung: exynos3250: Add MMC2 clock > ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk > ARM: dts: Add MSHC2 dt node for Exynos3250 SoC > ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module > > Jaehoon Chung (1): > ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board > > Pankaj Dubey (2): > clk: samsung: exynos3250: Add UART2 clock > ARM: dts: Add UART2 dt node for Exynos3250 SoC Thanks, applied all non-clock patches after pulling tag from Sylwester. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |