From: Hans Verkuil <hans.verkuil@xxxxxxxxx> Hi all, The fourteenth version of this patchset takes care of the TODO items from the previous patch series: the ARC/CDC code has been split off into a separate patch which I do not intend to upstream until I have been able to test it with actual hardware. The way CEC adapters are enabled and physical addresses are handled has been improved substantially. Drivers or userspace (if CEC_CAP_PHYS_ADDR is set) only have to provide the right physical address and the framework will enable or disable (for address f.f.f.f) the hardware accordingly. You also can now call CEC_ADAP_S_LOG_ADDRS only once and the framework will try to reinitialize the logical addresses automatically if the physical address went away and came back. As a result of these changes the old state and vendor ID ioctls have been removed, simplifying the API nicely. See the changelog below for more details. The cec-ctl and cec-compliance utilities used to test the CEC framework can be found here: http://git.linuxtv.org/cgit.cgi/hverkuil/v4l-utils.git/log/?h=cec Note that I started the first steps towards a proper CEC compliance test where I can put a CEC adapter in follower mode (where it replies to messages emulating a device) and/or initiator mode where the device sends messages to remote CEC adapters, testing those. The TODO items on my list are: - how does one determine whether this adapter is for a receiver, transmitter or repeater/switch? This is done with CEC_CAP_IS_SOURCE at the moment, but that won't work for a repeater/switch or a USB dongle. I am working on adding support for the Pulse Eight USB CEC dongle (thanks to Hans de Goede for telling me how to handle devices that use a serial port for communicating) so I can better test this use-case. - add test code to v4l2-compliance to test CEC_EVENT_STATE_CHANGE. I want to make sure I didn't miss anything there. - would the combination of physical address f.f.f.f and Unregistered make any sense? Currently the adapter is always disabled if f.f.f.f is set. Best regards, Hans Changes since v13 ================= - Removed CEC_CAP_STATE and _VENDOR_ID - Removed CEC_ADAP_G/S_STATE and CEC_ADAP_G/S_VENDOR_ID - Add vendor_id to struct cec_log_addrs - CEC_EVENT_STATE_CHANGE now reports the physical address, the logical address mask and the logical address type mask. - Add the logical address mask and the logical address type mask to struct cec_log_addrs. - Dropped cec_enable, instead enable/disable the adapter based on the physical address. - Once a valid physical address is available and userspace or driver specified the requested logical address configuration the framework will automatically claim the needed logical addresses. It will retry the last used addresses first, as per the recommendation in the CEC specification. - Dropped CEC power status handling: it's not clear if the kernel should handle that, and if it has to, whether this is the correct way. - Dropped CEC_EVENT_PHYS_ADDR_CHANGE, this is now handled by CEC_EVENT_STATE_CHANGE. - Add helper functions for manipulating physical addresses. - Updated documentation. - Dropped ninputs field in struct cec_caps. - Dropped CEC_EVENT_INPUTS_CHANGE, was never used and it is unclear if it is needed. Changes since v12 ================= - Added driver and name fields to the cec_caps struct. Without this it was very difficult to tell CEC adapters apart in a human readable manner. - Renamed CEC_CAP_IO to CEC_CAP_TRANSMIT, which better describes this capability. - Added the CEC_ADAP_LOG_STATUS to log the current status of the CEC adapter. Very useful when debugging. - Added comments to the cec.c source. - Added a timeout when waiting for a transmit to finish. Without the timeout the state machine could lock up when dealing with broken CEC adapter drivers or just unlucky situations. - Commenting the code also found a number of bugs which have been fixed. - Trying to poll yourself is now handled by the framework since different hardware would give different results. The framework will just NACK it. - Disabling the CEC adapter doesn't clear the physical address anymore. This turned out to be quite painful for applications. - Merged the CLAIM/RELEASE, G/S_MONITOR and G_PASSTHROUGH ioctls into two G/S_MODE ioctls. This allows you to tell the driver which initiator and follower modes you want, and greatly simplifies how these modes are handled. Changes since v11 ================= - Add a new CEC_EVENT_PHYS_ADDR_CHANGED to report when the physical address of the CEC adapter changes. Since the physical address is obtained from the EDID the application has to be informed when the kernel (or userspace for that matter) sets that. - Add a new internal cec_set_phys_addr() function to change the physical address and post the event. - Modified the retry-transmit mechanism: the framework will do the retry if the low-level driver returns a TX_STATUS error, but does not set the CEC_TX_STATUS_MAX_RETRIES status bit. In that case the framework assumes that there is no hardware retry and it will retry itself. This used to be through the 'retries' pointer argument (set to 0 if there is no retry support) but that doesn't work for hardware that does retry for some error conditions but not for others. - Added the missing CEC_TX_STATUS_LOW_DRIVE bit and low_drive_cnt error counter. I missed that potential CEC bus error condition. - By passing a NULL pointer to cec_claim_log_addrs() drivers can clear the logical addresses. - When a source loses the HPD the source has to clear the logical addresses and update its physical address. Implement this in the cobalt driver. - Improve tx_status handling in the various low-level drivers. Changes since v10 ================= - Split the msg.status field into tx_status and rx_status. - Add counters for various CEC protocol errors that can occur during transmit. - Add tx_status bits for the ARB_LOST and NACK status and add a generic CEC_TX_STATUS_ERROR bit. - Add retry support to the CEC framework for hardware that does not have retry support. - Improve event handling: on open() generate events that report the initial CEC adapter status and the number of connected inputs. Also ensure that you never loose important events (intermediate events may be lost, but never the last event). The basic mechanism has been taken from the V4L2 event implementation which works very well. - CEC emulation support was added to vivid which makes it much easier to test CEC applications without having hardware present. - Improve handling of timings and timeouts in the cec framework. - Improve locking. - Fixed buggy rc cleanup. - All CEC messages are now fully supported in cec-funcs.h (specifically handling of UI Commands and short audio descriptors). Changes since v9 ================ - Updated cec.txt - Added a promiscuous capability to signal those adapters that can monitor all CEC traffic, not just directed and broadcast messages. I have one adapter that can do this. Added code in the framework to handle such messages correctly. - The status field is now value and no longer a bitmask. - Renamed the kernel config from CEC to MEDIA_CEC - The adap_transmit() callback now has a retries argument. - Use the new CEC_MAX_MSG_SIZE define instead of hardcoding it as 16 - Add support to wait for a reply after a broadcast message: this was forbidden, but it is a valid use-case. - Make sure you can't send a message to yourself. - Waiting for a transmit to succeed would never timeout (and couldn't be interrupted). Fixed. - The message status was not updated correctly if it was CEC_MSG_FEATURE_ABORTed. - Fixed a nasty kernel oops when deleting a cec adapter. - Removed the owner check: the module owner is NULL if it is compiled into the kernel instead of as a module. - Added separate register/unregister calls: this is safer and actually made it possible to drop the ugly 'cec_ready' v4l2_subdev op. Suggested by Russell, and that was a good idea. - Added missing support for 32-bit to 64-bit ioctl conversion. - Move the v4l2_subdev cec ops into a v4l2_subdev_cec_ops struct. Changes since v8 ================ - Addressed the comments Russell King made about how the cec character devices should be allocated/freed. - Updated the DocBook documentation. Changes since v7 ================ - I thought that the core thread could handle out-of-order messages, but that turned out to be wrong. After careful analysis I realized that I had to rewrite this part in cec.c in order to make it work. - Added new CEC-specific keys to input.h and use them in the CEC rc keymap. Replaced KEY_PLAY/PAUSE/STOP with KEY_PLAYCD/PAUSECD/STOPCD to clarify that these are media operations and not the Pause key on the keyboard. - Added CEC_PHYS_ADDR_INVALID (0xffff) - Added monitor support to monitor CEC traffic - Replaced CAP_TRANSMIT and CAP_RECEIVE by a single CAP_IO. - Replaced CAP_CDC by CAP_CDC_HPD since this only applies to the HPD part of the CDC messages. - Add CAP_IS_SOURCE. - Add ninputs field to cec_caps to export the number of inputs of the device. - Drop CEC_LOG_ADDRS_FL_HANDLE_MSGS and the flags field (see next change for more info). - Add CEC_CLAIM and CEC_RELEASE to explicitly start/stop processing CEC messages. This also implies ownership of the CEC interface, so other filehandles can only receive but not transmit. - Reworked event handling: report adapter state changes, input changes and if the message receive queue is full. - cec-funcs.h: added CDC HEC support. - Renamed G/S_ADAP ioctls to ADAP_G/S: this made it clearer which ioctls deal with the adapter configuration and which deal with CEC messages/events. - Clarified which CEC messages are passed on to userspace and which aren't. Specifically if CAP_ARC is set, then all ARC messages are handled by the kernel. If CAP_CDC_HPD is set, then all CDC hotplug messages are handled by the kernel. Otherwise these messages are passed on to userspace. Changes since v6 ================ - added cec-funcs.h to provide wrapper functions that fill in the cec_msg struct. This header is needed both by the kernel and by applications. - fix a missing rc_unregister_device call. - added CEC support for the adv7842 and cobalt drivers. - added CEC operand defines. Rename CEC message defines to CEC_MSG_ and operand defines now use CEC_OP_. - the CEC_VERSION defines are dropped since we now have the CEC_OP_VERSION defines. - ditto: CEC_PRIM_DEVTYPE_ is now CEC_OP_PRIM_DEVTYPE. - ditto: CEC_FL_ALL_DEVTYPE_ is now CEC_OP_ALL_DEVTYPE. - cec-ioc-g-adap-log-addrs.xml: document cec_versions field. - cec-ioc-g-caps.xml: drop vendor_id and version fields. - add MAINTAINERS entry. - add CDC support (not yet fully functional). - add a second debug level for message debugging. - fix a nasty kernel Oops in cec_transmit_msg while waiting for transmit completion (adap->tx_queue[idx].func wasn't set to NULL). - add support for CEC_MSG_REPORT_FEATURES (CEC 2.0 only). - correctly abort unsupported messages. - add support for the device power status feature. - add support for the audio return channel (preliminary). - add support for the CDC hotplug message (preliminary). - added osd_name to struct cec_log_addrs. - reported physical addresses are stored internally. - fix enabling/disabling the CEC adapter (internal fields weren't cleared correctly). - zero reserved fields. - return an error if you try to receive/transmit and the adapter isn't configured. - when creating the adapter provide the owner module and the parent device. - add a CEC_VENDOR_ID_NONE define to signal if no vendor ID was set. - add new capabilities: RC (remote control), ARC (audio return channel) and CDC (Capability Discovery and Control). - applications that want to handle messages for a logical address need to set the CEC_LOG_ADDRS_FL_HANDLE_MSGS flag. Otherwise the CEC core will be the one handling all messages. - Each logical address has its own all_device_types value. So this should be an array, not a single value. - I'm sure I've forgotten some changes... Changes since v5 ================ - drop struct cec_timeval in favour of a __u64 that keeps the timestamp in ns - remove userspace documentation from Documentation/cec.txt as userspace API is described in the DocBook - add missing documentation for the passthrough mode to the DocBook - add information about the number of events that can be queued - fix misspelling of reply - fix behaviour of posting an event in cec_received_msg, such that the behaviour is consistent with the documentation Changes since v4 ================ - add sequence numbering to transmitted messages - add sequence number handling to event hanlding - add passthrough mode - change reserved field sizes - fixed CEC version defines and addec CEC 2.0 commands - add DocBook documentation Changes since v3 ================ - remove the promiscuous mode - rewrite the devicetree patches - fixes, expansion and partial rewrite of the documentation - reorder of API structures and addition of reserved fields - use own struct to report time (32/64 bit safe) - fix of handling events - add cec.h to include/uapi/linux/Kbuild - fixes in the adv76xx driver (add missing methods, change adv7604 to adv76xx) - cleanup of debug messages in s5p-cec driver - remove non necessary claiming of a gpio in the s5p-cec driver - cleanup headers of the s5p-cec driver Changes since v2 ===============- - added promiscuous mode - added new key codes to the input framework - add vendor ID reporting - add the possibility to clear assigned logical addresses - cleanup of the rc cec map Changes since v1 ================ - documentation edited and moved to the Documentation folder - added key up/down message handling - add missing CEC commands to the cec.h file Background ========== The work on a common CEC framework was started over three years ago by Hans Verkuil. Unfortunately the work has stalled. As I have received the task of creating a driver for the CEC interface module present on the Exynos range of SoCs, I got in touch with Hans. He replied that the work stalled due to his lack of time. Original RFC by Hans Verkuil/Martin Bugge ========================================= https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg28735.html Hans Verkuil (12): input.h: add BUS_CEC type cec: add HDMI CEC framework cec: add compat32 ioctl support cec.txt: add CEC framework documentation DocBook/media: add CEC documentation v4l2-subdev: add HDMI CEC ops cec: adv7604: add cec support. cec: adv7842: add cec support cec: adv7511: add cec support. cobalt: add cec support vivid: add CEC emulation cec: add ARC and CDC support Kamil Debski (5): dts: exynos4*: add HDMI CEC pin definition to pinctrl dts: exynos4: add node for the HDMI CEC device HID: add HDMI CEC specific keycodes rc: Add HDMI CEC protocol handling cec: s5p-cec: Add s5p-cec driver Marek Szyprowski (1): dts: exynos4412-odroid*: enable the HDMI CEC device Documentation/DocBook/device-drivers.tmpl | 3 + Documentation/DocBook/media/Makefile | 2 + Documentation/DocBook/media/v4l/biblio.xml | 10 + Documentation/DocBook/media/v4l/cec-api.xml | 73 + Documentation/DocBook/media/v4l/cec-func-close.xml | 59 + Documentation/DocBook/media/v4l/cec-func-ioctl.xml | 73 + Documentation/DocBook/media/v4l/cec-func-open.xml | 94 + Documentation/DocBook/media/v4l/cec-func-poll.xml | 89 + .../DocBook/media/v4l/cec-ioc-adap-g-caps.xml | 156 ++ .../DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml | 343 +++ .../DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml | 82 + .../DocBook/media/v4l/cec-ioc-adap-log-status.xml | 51 + .../DocBook/media/v4l/cec-ioc-dqevent.xml | 204 ++ Documentation/DocBook/media/v4l/cec-ioc-g-mode.xml | 281 ++ .../DocBook/media/v4l/cec-ioc-receive.xml | 261 ++ Documentation/DocBook/media_api.tmpl | 6 +- Documentation/cec.txt | 356 +++ .../devicetree/bindings/media/s5p-cec.txt | 31 + Documentation/video4linux/vivid.txt | 36 +- MAINTAINERS | 21 + arch/arm/boot/dts/exynos4.dtsi | 12 + arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 7 + arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 + arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 7 + drivers/media/Kconfig | 5 + drivers/media/Makefile | 2 + drivers/media/cec.c | 2728 ++++++++++++++++++++ drivers/media/i2c/Kconfig | 6 +- drivers/media/i2c/adv7511.c | 356 ++- drivers/media/i2c/adv7604.c | 286 +- drivers/media/i2c/adv7842.c | 323 ++- drivers/media/pci/cobalt/Kconfig | 1 + drivers/media/pci/cobalt/cobalt-driver.c | 102 +- drivers/media/pci/cobalt/cobalt-driver.h | 2 + drivers/media/pci/cobalt/cobalt-irq.c | 3 + drivers/media/pci/cobalt/cobalt-v4l2.c | 133 +- drivers/media/pci/cobalt/cobalt-v4l2.h | 2 + drivers/media/platform/Kconfig | 12 + drivers/media/platform/Makefile | 1 + drivers/media/platform/s5p-cec/Makefile | 2 + drivers/media/platform/s5p-cec/exynos_hdmi_cec.h | 38 + .../media/platform/s5p-cec/exynos_hdmi_cecctrl.c | 210 ++ drivers/media/platform/s5p-cec/regs-cec.h | 96 + drivers/media/platform/s5p-cec/s5p_cec.c | 294 +++ drivers/media/platform/s5p-cec/s5p_cec.h | 76 + drivers/media/platform/vivid/Kconfig | 1 + drivers/media/platform/vivid/vivid-core.c | 354 ++- drivers/media/platform/vivid/vivid-core.h | 27 + drivers/media/platform/vivid/vivid-kthread-cap.c | 11 + drivers/media/platform/vivid/vivid-vid-cap.c | 20 +- drivers/media/platform/vivid/vivid-vid-common.c | 7 + drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-cec.c | 174 ++ drivers/media/rc/rc-main.c | 1 + fs/compat_ioctl.c | 13 + include/media/cec.h | 215 ++ include/media/i2c/adv7511.h | 6 +- include/media/rc-map.h | 5 +- include/media/v4l2-subdev.h | 21 + include/uapi/linux/Kbuild | 2 + include/uapi/linux/cec-funcs.h | 1852 +++++++++++++ include/uapi/linux/cec.h | 922 +++++++ include/uapi/linux/input-event-codes.h | 30 + include/uapi/linux/input.h | 1 + 64 files changed, 10444 insertions(+), 158 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/cec-api.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-close.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-ioctl.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-open.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-poll.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-log-status.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-mode.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-receive.xml create mode 100644 Documentation/cec.txt create mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt create mode 100644 drivers/media/cec.c create mode 100644 drivers/media/platform/s5p-cec/Makefile create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cec.h create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c create mode 100644 drivers/media/platform/s5p-cec/regs-cec.h create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.c create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.h create mode 100644 drivers/media/rc/keymaps/rc-cec.c create mode 100644 include/media/cec.h create mode 100644 include/uapi/linux/cec-funcs.h create mode 100644 include/uapi/linux/cec.h -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |