Dear Chanwoo,
On 2016-03-25 01:10, Chanwoo Choi wrote:
Hi Robert,
I send following patch to fix the broken serial log of Exynos SoC.
As I knew, you also knew this issue.
If possible, could you review or test this patch?
Robert no longer works for Samsung, so I'm afraid that he won't be able
to test
this patch.
Best Regards,
Chanwoo Choi
On 2016년 03월 14일 09:41, Chanwoo Choi wrote:
This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
drivers/tty/serial/samsung.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d72cd736bdc6..80d59dbfebba 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1265,13 +1265,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (ourport->baudclk != clk) {
s3c24xx_serial_setsource(port, clk_sel);
+ clk_prepare_enable(clk);
+
IMHO clk_prepare_enable() should be moved before
s3c24xx_serial_setsource() to be
really sure that there will be no period of hw operating with disabled
baud clock.
Could you check if it works for you?
if (!IS_ERR(ourport->baudclk)) {
clk_disable_unprepare(ourport->baudclk);
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_prepare_enable(clk);
-
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
