On Thu, Mar 10, 2016 at 09:16:36AM +0900, Krzysztof Kozlowski wrote:
> On 10.03.2016 06:35, Eduardo Valentin wrote:
> > This changes the driver to use the devm_ version
> > of thermal_zone_of_sensor_register and cleans
> > up the local points and unregister calls.
> >
> > Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> > Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> > Cc: Kukjin Kim <kgene@xxxxxxxxxx>
> > Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> > Cc: linux-pm@xxxxxxxxxxxxxxx
> > Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx>
> > ---
> > drivers/thermal/samsung/exynos_tmu.c | 12 ++++--------
> > 1 file changed, 4 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> > index fa61eff..256039e 100644
> > --- a/drivers/thermal/samsung/exynos_tmu.c
> > +++ b/drivers/thermal/samsung/exynos_tmu.c
> > @@ -1363,8 +1363,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> > * data->tzd must be registered before calling exynos_tmu_initialize(),
> > * requesting irq and calling exynos_tmu_control().
> > */
> > - data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
> > - &exynos_sensor_ops);
> > + data->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, data,
> > + &exynos_sensor_ops);
> > if (IS_ERR(data->tzd)) {
> > ret = PTR_ERR(data->tzd);
> > dev_err(&pdev->dev, "Failed to register sensor: %d\n", ret);
> > @@ -1374,21 +1374,19 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> > ret = exynos_tmu_initialize(pdev);
> > if (ret) {
> > dev_err(&pdev->dev, "Failed to initialize TMU\n");
> > - goto err_thermal;
> > + goto err_sclk;
> > }
> >
> > ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> > IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
> > if (ret) {
> > dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> > - goto err_thermal;
> > + goto err_sclk;
> > }
> >
> > exynos_tmu_control(pdev, true);
> > return 0;
> >
> > -err_thermal:
> > - thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
> > err_sclk:
> > clk_disable_unprepare(data->sclk);
> > err_clk:
> > @@ -1406,9 +1404,7 @@ err_sensor:
> > static int exynos_tmu_remove(struct platform_device *pdev)
> > {
> > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > - struct thermal_zone_device *tzd = data->tzd;
> >
> > - thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
>
> Before, the sensor was removed from zone (ops like get_temp NULL-ified
> etc), then we stopped TMU, disabled clocks, disabled regulator and
> finally freed IRQ (through devm-like interface).
>
> Now this will be different - first stop of TMU, disable clocks, disable,
> regulator, remove sensor from zone (through devm) and finally free IRQ.
>
> Are you sure that changing order is okay?
Not really. After checking the driver code and your suggestions, I don't
think this driver would benefit of this change, not at least the way it
is currently.
Thanks for pointing out. I am taking this driver out of the series.
>
> Best regards,
> Krzysztof
>
> > exynos_tmu_control(pdev, false);
> >
> > clk_disable_unprepare(data->sclk);
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
