The clock and source clock looked up by the driver may not be available
just because the clock controller driver was not probed yet so printing
an error in this case is not correct and only adds confusion to users.
However, knowing that a driver's probe was deferred may be useful so it
can be printed as debug information.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-s3c.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index ffb860d18701..789ac8715038 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(info->rtc_clk)) {
- dev_err(&pdev->dev, "failed to find rtc clock\n");
- return PTR_ERR(info->rtc_clk);
+ ret = PTR_ERR(info->rtc_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to find rtc clock\n");
+ else
+ dev_dbg(&pdev->dev, "probe deferred due rtc clock\n");
+ return ret;
}
clk_prepare_enable(info->rtc_clk);
if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
if (IS_ERR(info->rtc_src_clk)) {
- dev_err(&pdev->dev,
- "failed to find rtc source clock\n");
+ ret = PTR_ERR(info->rtc_src_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to find rtc source clock\n");
+ else
+ dev_dbg(&pdev->dev,
+ "probe deferred due rtc source clock\n");
clk_disable_unprepare(info->rtc_clk);
- return PTR_ERR(info->rtc_src_clk);
+ return ret;
}
clk_prepare_enable(info->rtc_src_clk);
}
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
