On 23.02.2016 17:01, Anand Moon wrote:
> Add support for gpio-based button on Odroid-XU3 boards
> for reboot/poweroff feature.
>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
> changes rebase based on linux next-20160222.
>
> Tested on Odroid-XU4
>
> dmesg output.
> [ 3.286068] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/power_key[0]' - status (0)
> [ 3.286206] gpio-11 (power key): gpiod_set_debounce: missing set() or set_debounce() operations
> [ 3.286600] input: gpio_keys as /devices/platform/gpio_keys/input/input0
> ---
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 1bd507b..db9770b 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -11,6 +11,7 @@
> */
>
> #include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/sound/samsung-i2s.h>
> @@ -54,6 +55,22 @@
> #cooling-cells = <2>;
> cooling-levels = <0 130 170 230>;
> };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_power_key>;
> +
> + power_key {
> + interrupt-parent = <&gpx0>;
> + interrupts = <3 IRQ_TYPE_NONE>;
Hmmm.... why you specify the interrupts?
> + gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power key";
Just "power".
> + debounce-interval = <10>;
> + wakeup-source;
> + };
> + };
> };
>
> &clock_audss {
> @@ -362,6 +379,11 @@
> };
>
> &pinctrl_0 {
> + gpio_power_key: power_key {
The naming is mixed... Everything is GPIO here so don't add such prefix.
Underscores only in label, not in name of node.
power_key_irq: power-key-irq {
> + samsung,pins = "gpx0-3";
> + samsung,pin-pud = <0>;
Don't you want to set specific pin function? And what about drive strength?
Best regards,
Krzysztof
> + };
> +
> hdmi_hpd_irq: hdmi-hpd-irq {
> samsung,pins = "gpx3-7";
> samsung,pin-function = <0>;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
