Hello, The Maxim77802 PMIC driver uses a boolean Kconfig symbol but there isn't really a reason to require the driver to be built-in. It is true that since the PMIC provides clocks and regulators that could be critical on a system, most integrators are not going to build it as a module but it could be useful for multi-platform or distribution kernels that support different systems by building as much as possible as module. Besides this series, a patch for the max77686 regulator driver is needed or the MFD max77686 driver module won't be installed by kbuild. I didn't include the patch in this series to avoid cross-subsystems churn for the maintainers and also because I don't consider that a regression since it was not possible to build the driver as a module before anyways. Also, all the defconfigs in mainline that enable the MFD max77686 driver Kconfig symbol are using =y of course so it shouldn't be an issue to get this set merged, before the max77686 regulator patch already posted [0]. [0]: https://patchwork.kernel.org/patch/8287431/ Best regards, Javier Javier Martinez Canillas (4): mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Use module_i2c_driver() instead of subsys initcall mfd: max77686: Allow driver to be built as a module mfd: max77686: Export OF module alias information drivers/mfd/Kconfig | 4 ++-- drivers/mfd/max77686.c | 15 +++------------ 2 files changed, 5 insertions(+), 14 deletions(-) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |