Re: [PATCH v2 1/3] rtc: s5m: Cleanup by removing useless 'rtc' prefix from fields

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 12/30/2015 10:17 AM, Krzysztof Kozlowski wrote:
Remove the 'rtc' prefix from some of the fields in struct
s5m_rtc_reg_config because it is obvious - this is a RTC driver. No
functional changes.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

Looks good.
Tested for s2mps15 pmic on exynos7-espresso board. Works well as before.
Fill free to add
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
Tested-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>

---

Changes since v1:
1. None.
---
  drivers/rtc/rtc-s5m.c | 40 +++++++++++++++++++---------------------
  1 file changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 0d68a85dd429..85649861a6b0 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -55,9 +55,9 @@ struct s5m_rtc_reg_config {
  	 * will enable update of time or alarm register. Then it will be
  	 * auto-cleared after successful update.
  	 */
-	unsigned int rtc_udr_update;
-	/* Mask for UDR field in 'rtc_udr_update' register */
-	unsigned int rtc_udr_mask;
+	unsigned int udr_update;
+	/* Mask for UDR field in 'udr_update' register */
+	unsigned int udr_mask;
  };

  /* Register map for S5M8763 and S5M8767 */
@@ -67,8 +67,8 @@ static const struct s5m_rtc_reg_config s5m_rtc_regs = {
  	.ctrl			= S5M_ALARM1_CONF,
  	.alarm0			= S5M_ALARM0_SEC,
  	.alarm1			= S5M_ALARM1_SEC,
-	.rtc_udr_update		= S5M_RTC_UDR_CON,
-	.rtc_udr_mask		= S5M_RTC_UDR_MASK,
+	.udr_update		= S5M_RTC_UDR_CON,
+	.udr_mask		= S5M_RTC_UDR_MASK,
  };

  /*
@@ -81,8 +81,8 @@ static const struct s5m_rtc_reg_config s2mps_rtc_regs = {
  	.ctrl			= S2MPS_RTC_CTRL,
  	.alarm0			= S2MPS_ALARM0_SEC,
  	.alarm1			= S2MPS_ALARM1_SEC,
-	.rtc_udr_update		= S2MPS_RTC_UDR_CON,
-	.rtc_udr_mask		= S2MPS_RTC_WUDR_MASK,
+	.udr_update		= S2MPS_RTC_UDR_CON,
+	.udr_mask		= S2MPS_RTC_WUDR_MASK,
  };

  struct s5m_rtc_info {
@@ -166,9 +166,8 @@ static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
  	unsigned int data;

  	do {
-		ret = regmap_read(info->regmap, info->regs->rtc_udr_update,
-				&data);
-	} while (--retry && (data & info->regs->rtc_udr_mask) && !ret);
+		ret = regmap_read(info->regmap, info->regs->udr_update, &data);
+	} while (--retry && (data & info->regs->udr_mask) && !ret);

  	if (!retry)
  		dev_err(info->dev, "waiting for UDR update, reached max number of retries\n");
@@ -214,7 +213,7 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
  	int ret;
  	unsigned int data;

-	ret = regmap_read(info->regmap, info->regs->rtc_udr_update, &data);
+	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
  	if (ret < 0) {
  		dev_err(info->dev, "failed to read update reg(%d)\n", ret);
  		return ret;
@@ -223,21 +222,20 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
  	switch (info->device_type) {
  	case S5M8763X:
  	case S5M8767X:
-		data |= info->regs->rtc_udr_mask | S5M_RTC_TIME_EN_MASK;
+		data |= info->regs->udr_mask | S5M_RTC_TIME_EN_MASK;
  	case S2MPS15X:
  		/* As per UM, for write time register, set WUDR bit to high */
  		data |= S2MPS15_RTC_WUDR_MASK;
  		break;
  	case S2MPS14X:
  	case S2MPS13X:
-		data |= info->regs->rtc_udr_mask;
+		data |= info->regs->udr_mask;
  		break;
  	default:
  		return -EINVAL;
  	}

-
-	ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
+	ret = regmap_write(info->regmap, info->regs->udr_update, data);
  	if (ret < 0) {
  		dev_err(info->dev, "failed to write update reg(%d)\n", ret);
  		return ret;
@@ -253,14 +251,14 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
  	int ret;
  	unsigned int data;

-	ret = regmap_read(info->regmap, info->regs->rtc_udr_update, &data);
+	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
  	if (ret < 0) {
  		dev_err(info->dev, "%s: fail to read update reg(%d)\n",
  			__func__, ret);
  		return ret;
  	}

-	data |= info->regs->rtc_udr_mask;
+	data |= info->regs->udr_mask;
  	switch (info->device_type) {
  	case S5M8763X:
  	case S5M8767X:
@@ -268,7 +266,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
  		break;
  	case S2MPS15X:
  		/* As per UM, for write alarm, set A_UDR(bit[4]) to high
-		 * rtc_udr_mask above sets bit[4]
+		 * udr_mask above sets bit[4]
  		 */
  		break;
  	case S2MPS14X:
@@ -281,7 +279,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
  		return -EINVAL;
  	}

-	ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
+	ret = regmap_write(info->regmap, info->regs->udr_update, data);
  	if (ret < 0) {
  		dev_err(info->dev, "%s: fail to write update reg(%d)\n",
  			__func__, ret);
@@ -292,7 +290,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)

  	/* On S2MPS13 the AUDR is not auto-cleared */
  	if (info->device_type == S2MPS13X)
-		regmap_update_bits(info->regmap, info->regs->rtc_udr_update,
+		regmap_update_bits(info->regmap, info->regs->udr_update,
  				   S2MPS13_RTC_AUDR_MASK, 0);

  	return ret;
@@ -339,7 +337,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
  	if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
  			info->device_type == S2MPS13X) {
  		ret = regmap_update_bits(info->regmap,
-				info->regs->rtc_udr_update,
+				info->regs->udr_update,
  				S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
  		if (ret) {
  			dev_err(dev,

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux