Hi Jingoo,
Okay, fine, I would drop this patch, until I found the the root cause.
- Yakir
On 12/23/2015 11:10 PM, Jingoo Han wrote:
On Wednesday, December 23, 2015 9:51 PM, Yakir Yang wrote:
On Rockchip platform, sometimes driver would failed at reading EDID
message, and it's caused by the AUX reply flag wouldn't received under
the 100*10us wait time.
The problem is specific for Rockchip platform.
Also, 1 ms is long time.
The best way is that your hardware engineers find the root cause.
I cannot understand why your engineers cannot find the root cause. :-(
But after expand the wait time a little, the AUX reply flag would be
set, so maybe the wait time is a little critical. Besides the analogix
dp book haven't reminded the standard wait for looking AUX reply flag,
so I thought it's okay to expand the wait time.
And the external wait time won't hurt Exynos DP too much, cause they
wouldn't meet this problem, then driver would received the reply command
very soon, so no more additional wait time would bring to Exynos platform.
Then, when loop time happens on Exynos platform, it will take long time
to return error.
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v12:
- Using another way to expand the AUX reply wait time (Jingoo)
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index cba3ffd..8687eea 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -471,7 +471,7 @@ int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
{
int reg;
int retval = 0;
- int timeout_loop = 0;
+ unsigned long timeout;
/* Enable AUX CH operation */
reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
@@ -479,14 +479,12 @@ int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
/* Is AUX CH command reply received? */
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
- while (!(reg & RPLY_RECEIV)) {
- timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ timeout = jiffies + msecs_to_jiffies(5);
+ while ((readl(dp->reg_base + ANALOGIX_DP_INT_STA) & RPLY_RECEIV) == 0) {
+ if (time_after(jiffies, timeout)) {
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
Sorry, I don't like your patch.
The problem happens because of Rockchip platform.
So, you need to add workaround for only Rockchip platform.
Just add new DT property and new variable for the value for wait time.
When, the probe is called, new wait time value is read from Rockchip DT file.
Then, the new wait time value can be written to the new variable.
new DT property: wait-time-aux
new variable: wait_time_aux
If ( ) // New DT
wait_time_aux = New DT;
else
wait_time_aux = 10;
usleep_range(10, 11);
If there is NO new wait time value from DT file, the default value '10' is
used for sleep.
But, if there is new wait time value from DT file, new wait time value
can be used for sleep.
usleep_range(dp->wait_time_aux, dp->wait_time_aux + 1);
What I want to say is that there should be NO effect on Exynos platform,
because of the hardware bug of Rockchip platform.
Best regards,
Jingoo Han
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
