Hello Viresh, On 12/11/2015 12:16 AM, Viresh Kumar wrote: > On 10-12-15, 17:58, Bartlomiej Zolnierkiewicz wrote: >> diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi >> index b7f60c8..9a5131d 100644 >> --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi >> @@ -20,8 +20,10 @@ >> device_type = "cpu"; >> compatible = "arm,cortex-a7"; >> reg = <0x100>; >> + clocks = <&clock CLK_KFC_CLK>; >> clock-frequency = <1000000000>; >> cci-control-port = <&cci_control0>; >> + operating-points-v2 = <&cpu1_opp_table>; >> }; > > Why do you need to update this file? This file is included by > exynos5422-odroidxu3-common.dtsi, which already inherits cpus nodes > from exynos5800.dtsi (which inherits exynos5420.dtsi). > > i.e. operating-points-v2 should already be set. > The problem is that the big and LITTLE cores have different ordering per SoCs: - Exynos5420 and Exynos5800: cpu0-3 (Cortex-A15) and cpu4-7 (Coretx-A7) - Exynos5422: cpu0-3 (Cortex-A7) and cpu4-7 (Cortex-A15) So the OPP tables are set in this DTSI file, to prevent the OPP tables in the Exynos5422 to be inverted for the cluster 0 and 1. Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |