Re: [PATCH v2 02/19] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2015년 12월 10일 10:25, Krzysztof Kozlowski wrote:
> On 10.12.2015 09:49, Chanwoo Choi wrote:
>> Hi,
>>
> (...)
> 
>>>
>>>> +
>>>> +	bus_dmc: bus_dmc {
>>>> +		compatible = "samsung,exynos-bus";
>>>> +		clocks = <&cmu_dmc CLK_DIV_DMC>;
>>>> +		clock-names = "bus";
>>>> +		operating-points-v2 = <&bus_dmc_opp_table>;
>>>> +		status = "disabled";
>>>> +	};
>>>> +
>>>> +	bus_dmc_opp_table: opp_table0 {
>>>> +		compatible = "operating-points-v2";
>>>> +		opp-shared;
>>>> +
>>>> +		opp00 {
>>>
>>> Maybe use convention with frequency, like:
>>> 	opp@50000000
>>> This also used in opp.txt examples.
>>
>> In the Documentations/devicetree/bindings/opp/opp.txt,
>> the example uses the 'opp@0x'. I check the opp.txt of Linux 4.4-rc4.
> 
> Yes, it was changed by Viresh in "PM / OPP: Rename OPP nodes as
> opp@<opp-hz>". You can find the most actual bindings in linux-next.

OK. I'll.

Best Regards,
Chanwoo Choi

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux