W dniu 19.11.2015 o 20:51, Marek Szyprowski pisze: > DWC3 device found on Exynos SoCs cannot work in OTG mode alone, because > it lacks some OTG related control part. OTG mode operation is possible > only with external hardware logic (usually GPIO-based) specific to > the board. Right now, however, there is no driver for such logic and no > bindings, so the OTG mode is disfunctional at all (this means that it s/disfunctional/dysfunctional/ (no need to resend, this can be fixed when applying) > doesn't work as a peripheral nor as a host). This patch sets the operation > mode to peripheral to get DWC3_1 device at least somehow working. This can > be later updated, when proper OTG driver and bindings get developed. > > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> > --- > arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 2 +- > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > Explanation makes sense. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |