Re: [PATCH v5 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On Sat, Nov 7, 2015 at 4:03 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Fri, Oct 30, 2015 at 11:55:31AM +0530, Alim Akhtar wrote:
>> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>>
>> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
>> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
>> This also supports RTC and three 32.768KHz clock outputs.
>>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/mfd/s2mps11.txt |   21 ++++++++++++++-------
>>  1 file changed, 14 insertions(+), 7 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index 890f0b0e1643..4c0543ceec25 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -1,5 +1,5 @@
>>
>> -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
>> +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
>>
>>  The Samsung S2MPS11 is a multi-function device which includes voltage and
>>  current regulators, RTC, charger controller and other sub-blocks. It is
>> @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>>  addressed by the host system using different I2C slave addresses.
>>
>>  Required properties:
>> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
>> -           or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
>> +- compatible: Should be one of the following
>> +     - "samsung,s2mps11-pmic"
>> +     - "samsung,s2mps13-pmic"
>> +     - "samsung,s2mps14-pmic"
>> +     - "samsung,s2mps15-pmic"
>> +     - "samsung,s2mpu02-pmic".
>>  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>>
>>  Optional properties:
>> @@ -24,7 +28,7 @@ Optional properties:
>>    unwanted buck warm reset (setting buck voltages to default values).
>>
>>  Optional nodes:
>> -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
>> +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
>
> s5m8767 doesn't seem to be documented. Can you please fix or remove.
>
Ok, will take a look.

> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux