[PATCH v3 1/2] arm64: dts: exynos7: Add PMIC S2MPS15 device tree node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds PMIC (S2MPS15) node of espresso board,
which includes addition of regulators and pmic-clk sub-nodes.

This patch also adds {vmmc,vqmmc}-supply properties for mmc2 node.

Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
Changes since v2:
* Addressed Krzysztof comments.

Changes since v1:
* Addressed Javier and Krzysztof review comments.
* Removed unused ldo/buck nodes.
* Removed always-on properties from ldo/buck to disable them
* Added a consumer of pmic supply (like mmc)

 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |  280 +++++++++++++++++++++++
 1 file changed, 280 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 5424cc450f72..f5a3da50ac57 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -52,6 +53,283 @@
 	status = "okay";
 };
 
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <200000>;
+	status = "okay";
+
+	s2mps15_pmic@66 {
+		compatible = "samsung,s2mps15-pmic";
+		reg = <0x66>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpa0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+		wakeup-source;
+
+		s2mps15_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vqmmc-sdcard";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1110000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <2250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vmmc-sdcard";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_ldo18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_ldo19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_ldo23";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1470000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_atlas";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_buck7";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_buck8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_buck9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_buck10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+		};
+	};
+};
+
+&pinctrl_alive {
+	pmic_irq: pmic-irq {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -80,5 +358,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 	bus-width = <4>;
+	vmmc-supply = <&ldo17_reg>;
+	vqmmc-supply = <&ldo2_reg>;
 	disable-wp;
 };
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux