Re: [PATCH 2/2] arm64: dts: exynos7: Enable HS200 mode operation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 11/02/2015 05:28 PM, Krzysztof Kozlowski wrote:
Subject - name of the board at the end (not the name of the SoC):
arm64: dts: Enable HS200 mode operation on exynos7-espresso

2015-11-02 19:04 GMT+09:00 Alim Akhtar <alim.akhtar@xxxxxxxxxxx>:
This patch enables HS200 mode operation on exynos7 based
espresso board.
This also remove _broken-cd_ property as per mmc binding documentation

s/remove/removes/

which say one of the properties between broken-cd and non-removable

s/say/says/

should be used. And we already use _non-removable_ as emmc mounted
on board which is a non-removable device.

Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 8ce04a0ec928..7f19b99fc85b 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -405,8 +405,8 @@
  &mmc_0 {
         status = "okay";
         num-slots = <1>;
-       broken-cd;
         cap-mmc-highspeed;
+       mmc-hs200-1_8v;

The "mmc-ddr-1_8v" should also be supported but I guess you did not
add it on purpose?

Well, I have not tested it, that why didn't added. Will check if this works then will add.
Thanks for your comments.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux