Hi Krzysztof,
在 09/04/2015 08:41 AM, Krzysztof Kozlowski 写道:
On 03.09.2015 14:30, Yakir Yang wrote:
Hi Krzysztof,
在 09/03/2015 08:58 AM, Krzysztof Kozlowski 写道:
On 01.09.2015 14:49, Yakir Yang wrote:
Split the dp core driver from exynos directory to bridge
directory, and rename the core driver to analogix_dp_*,
leave the platform code to analogix_dp-exynos.
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v4:
- Take Rob suggest, update "analogix,hpd-gpios" to "hpd-gpios" DT
propery.
- Take Jingoo suggest, rename "analogix_dp-exynos.c" file name to
"exynos_dp.c"
- Take Archit suggest, create a separate folder for analogix code in
bridge/
Changes in v3:
- Take Thierry Reding suggest, move exynos's video_timing code
to analogix_dp-exynos platform driver, add get_modes method
to struct analogix_dp_plat_data.
- Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
Changes in v2:
- Take Jingoo Han suggest, remove new copyright
- Fix compiled failed dut to analogix_dp_device misspell
[.....]
-static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
+static int analogix_dp_bridge_attach(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = bridge->driver_private;
- struct drm_encoder *encoder = &dp->encoder;
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_encoder *encoder = dp->encoder;
struct drm_connector *connector = &dp->connector;
int ret;
- /* Pre-empt DP connector creation if there's a bridge */
- if (dp->ptn_bridge) {
- ret = exynos_drm_attach_lcd_bridge(dp, encoder);
- if (!ret)
- return 0;
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
}
+ encoder->bridge = bridge;
+
connector->polled = DRM_CONNECTOR_POLL_HPD;
ret = drm_connector_init(dp->drm_dev, connector,
- &exynos_dp_connector_funcs,
+ &analogix_dp_connector_funcs,
DRM_MODE_CONNECTOR_eDP);
if (ret) {
DRM_ERROR("Failed to initialize connector with drm\n");
return ret;
}
- drm_connector_helper_add(connector,
&exynos_dp_connector_helper_funcs);
+ drm_connector_helper_add(connector,
+ &analogix_dp_connector_helper_funcs);
drm_connector_register(connector);
drm_mode_connector_attach_encoder(connector, encoder);
- if (dp->panel)
- ret = drm_panel_attach(dp->panel, &dp->connector);
+ if (dp->plat_data && dp->plat_data->panel) {
+ ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
+ if (ret) {
+ DRM_ERROR("Failed to attach panel\n");
+ return ret;
+ }
+ }
+
+ /*
+ * This should be the end of attach function, caused
+ * we should ensure dp bridge could attach first.
+ */
+ if (dp->plat_data && dp->plat_data->attach) {
+ ret = dp->plat_data->attach(dp->plat_data, bridge);
+ if (ret) {
+ DRM_ERROR("Failed at platform attch func\n");
Two new error paths appeared here and above. Don't you have to
cleanup something? I don't know, just wondering...
Hmm... I think both panel & platform_attch need ERROR remind when
it failed. But if it still need clean, I though it should clean the platform attch
error,
this is not relate to DRM directly, just analogix driver logic, so code would like,
- if (dp->panel)
- ret = drm_panel_attach(dp->panel, &dp->connector);
+ if (dp->plat_data && dp->plat_data->panel) {
+ ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
+ if (ret) {
+ DRM_ERROR("Failed to attach panel\n");
+ return ret;
+ }
+ }
+ /*
+ * This should be the end of attach function, caused
+ * we should ensure dp bridge could attach first.
+ */
+ if (dp->plat_data && dp->plat_data->attach) {
+ ret = dp->plat_data->attach(dp->plat_data, bridge);
return ret;
I am lost... the code looks the same. What did you change?
I just remove the DRM_ERROR after dp->plat_data->attach(),
maybe I should paste the change that rebase on this patch,
here are they,
/*
* This should be the end of attach function, caused
* we should ensure dp bridge could attach first.
*/
- if (dp->plat_data && dp->plat_data->attach) {
+ if (dp->plat_data && dp->plat_data->attach)
ret = dp->plat_data->attach(dp->plat_data, bridge);
- if (ret) {
- DRM_ERROR("Failed at platform attch func\n");
- return ret;
- }
- }
- return 0;
+ return ret;
If this haven't meet your comment, I maybe start to think that
your comment "Two new error paths appeared here and above"
indicated that those two function is the same.
"dp->plat_data->attach(dp->plat_data, bridge); "
"drm_panel_attach(dp->plat_data->panel, &dp->connector); "
Thanks,
- Yakir
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
