On 25.08.2015 14:47, Marek Szyprowski wrote: > Hello, > > On 2015-08-21 14:44, Kishon Vijay Abraham I wrote: >> On Friday 21 August 2015 06:08 PM, Marek Szyprowski wrote: >>> Exynos USB2 PHY has separate power supply, which is usually provided by >>> VBUS regulator. This patch adds support for it. VBUS regulator is >>> optional, to keep compatibility with boards, which have VBUS provided >>> from some always-on power source. >>> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> >>> --- >>> .../devicetree/bindings/phy/samsung-phy.txt | 3 +++ >>> drivers/phy/phy-samsung-usb2.c | 25 >>> ++++++++++++++++++++-- >>> drivers/phy/phy-samsung-usb2.h | 2 ++ >>> 3 files changed, 28 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> b/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> index 60c6f2a633e0..0289d3b07853 100644 >>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> @@ -44,6 +44,9 @@ Required properties: >>> - the "ref" clock is used to get the rate of the clock provided >>> to the >>> PHY module >>> +Optional properties: >>> +- vbus-supply: power-supply phandle for vbus power source >> how about using phy-supply? > > I wanted to make it a bit more descriptive (vbus-supply is rather self > explaining name) > and keep it in line with Exynos usb3-drd phy, which already supports > vbus-supply. > If you think that this is a bad idea, a will use phy-supply then. This is actually supply for VBUS, not for the phy. Using phy-supply would work fine and reduce the size of code... but would be rather a hacky-use of phy and it could be misleading. I don't have strong feeling about this, both ideas have its advantages. If I had to choose than I would like to use vbus-supply because of its correctness with real-world (this is a VBUS after all). Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html