[PATCH v3 06/14] Documentation: drm/bridge: add document for analogix_dp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt

Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v3:
- Take Heiko suggest, add devicetree binding documents.
- Take Thierry Reding suggest, remove sync pol & colorimetry properies
  from the new analogix dp driver devicetree binding.
- Update the exist exynos dtsi file with the latest DP DT properies.

Changes in v2: None

 .../devicetree/bindings/drm/bridge/analogix_dp.txt | 70 ++++++++++++++++++++++
 .../devicetree/bindings/video/exynos_dp.txt        | 50 ++++++----------
 arch/arm/boot/dts/exynos5250-arndale.dts           | 10 ++--
 arch/arm/boot/dts/exynos5250-smdk5250.dts          | 10 ++--
 arch/arm/boot/dts/exynos5250-snow.dts              | 12 ++--
 arch/arm/boot/dts/exynos5250-spring.dts            | 12 ++--
 arch/arm/boot/dts/exynos5420-peach-pit.dts         | 12 ++--
 arch/arm/boot/dts/exynos5420-smdk5420.dts          | 10 ++--
 arch/arm/boot/dts/exynos5800-peach-pi.dts          | 12 ++--
 9 files changed, 119 insertions(+), 79 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
new file mode 100644
index 0000000..6127018
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
@@ -0,0 +1,70 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+	-compatible:
+		platform specific such as:
+		 * "samsung,exynos5-dp"
+		 * "rockchip,rk3288-dp"
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
+	-analogix,color-space:
+		input video data format.
+			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
+	-analogix,color-depth:
+		number of bits per colour component.
+			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
+	-analogix,link-rate:
+		max link rate supported by the eDP controller.
+			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A,
+			LINK_RATE_5_40GBPS = 0x14
+	-analogix,lane-count:
+		max number of lanes supported by the eDP contoller.
+			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+	-port@[X]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/media/video-interfaces.txt,
+		please refer to the SoC specific binding document:
+		* Documentation/devicetree/bindings/video/exynos_dp.txt
+		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+Optional properties for dp-controller:
+	-analogix,hpd-gpio:
+		Hotplug detect GPIO.
+			Indicates which GPIO should be used for hotplug
+			detection
+	-video interfaces: Device node can contain video interface port
+			    nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+-------------------------------------------------------------------------------
+
+Example:
+
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
+
+		phys = <&dp_phy>;
+		phy-names = "dp";
+
+		analogix,color-space = <0>;
+		analogix,color-depth = <1>;
+		analogix,link-rate = <0x0a>;
+		analogix,lane-count = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 7a3a9cd..177506f 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -31,28 +31,10 @@ Required properties for dp-controller:
 		from general PHY binding: the phandle for the PHY device.
 	-phy-names:
 		from general PHY binding: Should be "dp".
-	-samsung,color-space:
-		input video data format.
-			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
-	-samsung,dynamic-range:
-		dynamic range for input video data.
-			VESA = 0, CEA = 1
-	-samsung,ycbcr-coeff:
-		YCbCr co-efficients for input video.
-			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
-	-samsung,color-depth:
-		number of bits per colour component.
-			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
-	-samsung,link-rate:
-		link rate supported by the panel.
-			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
-	-samsung,lane-count:
-		number of lanes supported by the panel.
-			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
-	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/video/display-timing.txt
 
 Optional properties for dp-controller:
+	- display-timings: timings for the connected panel as described by
+		Documentation/devicetree/bindings/video/display-timing.txt
 	-interlaced:
 		interlace scan mode.
 			Progressive if defined, Interlaced if not defined
@@ -62,14 +44,18 @@ Optional properties for dp-controller:
 	-hsync-active-high:
 		HSYNC polarity configuration.
 			High if defined, Low if not defined
-	-samsung,hpd-gpio:
-		Hotplug detect GPIO.
-			Indicates which GPIO should be used for hotplug
-			detection
-	-video interfaces: Device node can contain video interface port
-			    nodes according to [1].
 
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+	-phys (required)
+	-phy-names (required)
+	-analogix,color-space (required)
+	-analogix,color-depth (required)
+	-analogix,link-rate (required)
+	-analogix,lane-count (required)
+	-analogix,hpd-gpio (optional)
+	-video interfaces (optional)
+-------------------------------------------------------------------------------
 
 Example:
 
@@ -88,12 +74,10 @@ SOC specific portion:
 
 Board Specific portion:
 	dp-controller {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
+		analogix,color-space = <0>;
+		analogix,color-depth = <1>;
+		analogix,link-rate = <0x0a>;
+		analogix,lane-count = <4>;
 
 		display-timings {
 			native-mode = <&lcd_timing>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7e728a1..e48798d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -119,12 +119,10 @@
 
 &dp {
 	status = "okay";
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <4>;
 };
 
 &fimd {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 4fe186d..b8c6b8b 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -75,12 +75,10 @@
 };
 
 &dp {
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <4>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index b7f4122..9ce2b89 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -239,13 +239,11 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <2>;
+	analogix,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
 
 	ports {
 		port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index d03f9b8..9288ae6 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -69,13 +69,11 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <1>;
-	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <1>;
+	analogix,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 };
 
 &ehci {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c..695a380 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -147,13 +147,11 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x06>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x06>;
+	analogix,lane-count = <2>;
+	analogix,hpd-gpio = <&gpx2 6 0>;
 
 	ports {
 		port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 98871f9..fd46714 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -91,12 +91,10 @@
 &dp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <4>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7d5b386..54b4c63 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -141,13 +141,11 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	analogix,color-space = <0>;
+	analogix,color-depth = <1>;
+	analogix,link-rate = <0x0a>;
+	analogix,lane-count = <2>;
+	analogix,hpd-gpio = <&gpx2 6 0>;
 	panel = <&panel>;
 };
 
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux