Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2015/8/6 15:08, Krzysztof Kozlowski 写道:
On 06.08.2015 15:44, Shawn Lin wrote:
DesignWare MMC Controller can supports two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to support these platforms. I've tested it on RK312x
platform with edmac mode and RK3288 platform with idmac mode.

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>

---

Changes in v4:
- remove "host->trans_mode" and use "host->use_dma" to indicate
   transfer mode.
- remove all bt-bindings' changes since we don't need new properities.
- check transfer mode at runtime by reading HCON reg
- spilt defconfig changes for each sub-architecture
- fix the title of cover letter
How did you fixed the title? It is still empty :)
	Subject: [RFC PATCH v4 0/9]
  I mentioned that in ChangeLog-v4 but unfortunately I forgot it.
  Thanks, Krzysztof.  I will be more careful and add it for next version.


- reuse some code for reducing code size

Changes in v3:
- choose transfer mode at runtime
- remove all CONFIG_MMC_DW_IDMAC config option
- add supports-idmac property for some platforms

Changes in v2:
- Fix typo of dev_info msg
- remove unused dmach from declaration of dw_mci_dma_slave

  drivers/mmc/host/Kconfig        |  11 +-
  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
  include/linux/mmc/dw_mmc.h      |  27 ++++-
  4 files changed, 232 insertions(+), 66 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 6a0f9c7..a86c0eb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -607,15 +607,7 @@ config MMC_DW
  	help
  	  This selects support for the Synopsys DesignWare Mobile Storage IP
  	  block, this provides host support for SD and MMC interfaces, in both
-	  PIO and external DMA modes.
-
-config MMC_DW_IDMAC
-	bool "Internal DMAC interface"
-	depends on MMC_DW
-	help
-	  This selects support for the internal DMAC block within the Synopsys
-	  Designware Mobile Storage IP block. This disables the external DMA
-	  interface.
+	  PIO, internal DMA mode and external DMA modes.
config MMC_DW_PLTFM
  	tristate "Synopsys Designware MCI Support as platform device"
@@ -644,7 +636,6 @@ config MMC_DW_K3
  	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
  	depends on MMC_DW
  	select MMC_DW_PLTFM
-	select MMC_DW_IDMAC
  	help
  	  This selects support for Hisilicon K3 SoC specific extensions to the
  	  Synopsys DesignWare Memory Card Interface driver. Select this option
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index ec6dbcd..7e1d13b 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
  	host->pdata = pdev->dev.platform_data;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* Get registers' physical base address */
+	host->phy_regs = (void *)(regs->start);
  	host->regs = devm_ioremap_resource(&pdev->dev, regs);
  	if (IS_ERR(host->regs))
  		return PTR_ERR(host->regs);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 40e9d8e..5d6cdff 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -56,7 +56,7 @@
  #define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
  #define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
-#ifdef CONFIG_MMC_DW_IDMAC
+
  #define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
  				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
  				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
@@ -99,7 +99,6 @@ struct idmac_desc {
__le32 des3; /* buffer 2 physical address */
  };
-#endif /* CONFIG_MMC_DW_IDMAC */
static bool dw_mci_reset(struct dw_mci *host);
  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
@@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
  		return DMA_FROM_DEVICE;
  }
-#ifdef CONFIG_MMC_DW_IDMAC
  static void dw_mci_dma_cleanup(struct dw_mci *host)
  {
  	struct mmc_data *data = host->data;
@@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
  	mci_writel(host, BMOD, temp);
  }
-static void dw_mci_idmac_complete_dma(struct dw_mci *host)
+static void dw_mci_dmac_complete_dma(void *arg)
  {
+	struct dw_mci *host = arg;
Why changing the argument to void*?

This function will be used as callback hook of dmaengine, and the prototype is
"typedef void (*dma_async_tx_callback)(void *dma_async_param);".
w/o this change, we meet a warning  for incompatible pointer case.


Best regards,
Krzysztof

  	struct mmc_data *data = host->data;
dev_vdbg(host->dev, "DMA complete\n"); + if (host->use_dma == TRANS_MODE_EDMAC)
+		if (data && (data->flags & MMC_DATA_READ))
+			/* Invalidate cache after read */
+			dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
+					    data->sg,
+					    data->sg_len,
+					    DMA_FROM_DEVICE);
+
  	host->dma_ops->cleanup(host);






--
Shawn Lin


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux