[ added Zhang & Eduardo to Cc: ]
Hi,
On Saturday, August 01, 2015 04:43:58 PM Krzysztof Kozlowski wrote:
> W dniu 01.08.2015 o 03:49, Bartlomiej Zolnierkiewicz pisze:
> > The new CPU clock type allows the use of generic CPUfreq driver.
> > Switch Exynos4x12 to using generic cpufreq driver.
> >
> > Also make CPUFREQ_DT config option select Exynos thermal driver
> > if Exynos platform support is enabled.
>
> Why? I think this wasn't in your previous patch.
Previous patch kept ARM_EXYNOS_CPU_FREQ_BOOST_SW config option
which selected EXYNOS_THERMAL. After recent changes (boost
support enabled in the cpufreq-dt driver when there are turbo
OPPs in board's dts file) ARM_EXYNOS_CPU_FREQ_BOOST_SW config
option become redundant and was removed. However we still
would like to allow enabling boost support only if thermal
support is also enabled for Exynos platforms.
[ There may be a better way to do this in the future (runtime
checking for thermal support being enabled) but currently
there seems to be no thermal infrastructure to allow this. ]
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> Best regards,
> Krzysztof
>
>
> >
> > Please also note that the switch to use the generic cpufreq-dt
> > driver fixes the minor issue present with the old code (support
> > for 'boost' mode in the exynos-cpufreq driver was enabled for
> > all supported SoCs even though 'boost' frequency was provided
> > only for Exynos4x12 ones).
> >
> > Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
> > Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> > Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> > Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> > ---
> > arch/arm/mach-exynos/exynos.c | 2 ++
> > drivers/cpufreq/Kconfig | 1 +
> > 2 files changed, 3 insertions(+)
> >
> > diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> > index 77ac021..1c47aee 100644
> > --- a/arch/arm/mach-exynos/exynos.c
> > +++ b/arch/arm/mach-exynos/exynos.c
> > @@ -227,6 +227,8 @@ static void __init exynos_init_irq(void)
> > static const struct of_device_id exynos_cpufreq_matches[] = {
> > { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
> > { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
> > + { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
> > + { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
> > { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
> > { /* sentinel */ }
> > };
> > diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> > index 659879a..bf6d596 100644
> > --- a/drivers/cpufreq/Kconfig
> > +++ b/drivers/cpufreq/Kconfig
> > @@ -191,6 +191,7 @@ config CPUFREQ_DT
> > # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
> > depends on !CPU_THERMAL || THERMAL
> > select PM_OPP
> > + select EXYNOS_THERMAL if ARCH_EXYNOS
> > help
> > This adds a generic DT based cpufreq driver for frequency management.
> > It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
