Hello,
On 2015-07-16 15:09, Hans Verkuil wrote:
Marek, Kamil,
On 06/29/15 12:14, Hans Verkuil wrote:
From: Kamil Debski <kamil@xxxxxxxxx>
Add CEC interface driver present in the Samsung Exynos range of
SoCs.
The following files were based on work by SangPil Moon:
- exynos_hdmi_cec.h
- exynos_hdmi_cecctl.c
Signed-off-by: Kamil Debski <kamil@xxxxxxxxx>
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
<snip>
diff --git a/drivers/media/platform/s5p-cec/s5p_cec.c b/drivers/media/platform/s5p-cec/s5p_cec.c
new file mode 100644
index 0000000..0f16d00
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/s5p_cec.c
@@ -0,0 +1,283 @@
+/* drivers/media/platform/s5p-cec/s5p_cec.c
+ *
+ * Samsung S5P CEC driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is based on the "cec interface driver for exynos soc" by
+ * SangPil Moon.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+#include "s5p_cec.h"
+
+#define CEC_NAME "s5p-cec"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+static int s5p_cec_enable(struct cec_adapter *adap, bool enable)
+{
+ struct s5p_cec_dev *cec = container_of(adap, struct s5p_cec_dev, adap);
+ int ret;
+
+ if (enable) {
+ ret = pm_runtime_get_sync(cec->dev);
+
+ adap->phys_addr = 0x100b;
This is a bogus physical address. The actual physical address has to be derived
from the EDID that is read by the HDMI transmitter.
I think in the case of this driver it will have to be userspace that assigns
the physical address after reading the EDID from drm/kms?
How did you test this, Kamil?
If I remember correctly, physical address has been derived from EDID in the
userspace (it is available in /sys/class/drm/*) and passed to s5p-cec
driver by
appropriate ioctl.
I don't know what is the reason for the above 'adap->phys_addr = 0x100b'
assignment.
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
