Hello Michal,
On Wed, Jun 3, 2015 at 11:26 PM, Michal Suchanek <hramrach@xxxxxxxxx> wrote:
> Although there is only one choice of chipselect it is necessary to
> specify it. The driver cannot claim the gpio otherwise.
>
> Signed-off-by: Michal Suchanek <hramrach@xxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5250-snow.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index 1eca97e..1fa72cf 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -687,9 +687,10 @@
> };
>
> &spi_1 {
> - status = "okay";
> samsung,spi-src-clk = <0>;
> num-cs = <1>;
> + cs-gpios = <&gpa2 5 0>;
> + status = "okay";
Why are you changing the position of the status property? AFAIK the
convention is to have this property at the beginning of the device
node.
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
