On 05/06/2015 10:36 PM, Tobias Jakobi wrote:
> First step in allowing a more generic way to setup complex
> blending for the different layers.
>
> Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/exynos/exynos_mixer.c | 90 ++++++++++++++++++++++++++++++-----
> 1 file changed, 79 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
> index 4a1656b..e4a5e76 100644
> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
> @@ -63,6 +63,11 @@ struct mixer_resources {
> struct clk *mout_mixer;
> };
>
> +struct layer_config {
> + unsigned int index;
> + unsigned int priority;
I think layer index and priority information can go to struct
exynos_drm_plane.
> +};
> +
> enum mixer_version_id {
> MXR_VER_0_0_0_16,
> MXR_VER_16_0_33_0,
> @@ -75,6 +80,8 @@ struct mixer_context {
> struct drm_device *drm_dev;
> struct exynos_drm_crtc *crtc;
> struct exynos_drm_plane planes[MIXER_WIN_NR];
> + const struct layer_config *layer_config;
> + unsigned int num_layer;
> int pipe;
> bool interlace;
> bool powered;
> @@ -95,6 +102,40 @@ struct mixer_drv_data {
> bool has_sclk;
> };
>
> +/*
> + * The default layer priorities. A higher priority means that
> + * the layer is at the top of layer stack.
> + * The current configuration assumes the following usage scenario:
> + * layer1: OSD [top]
> + * layer0: main framebuffer
> + * video layer: video overlay [bottom]
> + * Note that the video layer is only usable when the
> + * video processor is available.
> + */
> +
> +static const struct layer_config default_layer_config[] = {
> + {
> + .index = 0, /* layer0 */
> + .priority = 1
> + }, {
> + .index = 1, /* layer1 */
> + .priority = 2
> + }
> +};
> +
> +static const struct layer_config vp_layer_config[] = {
> + {
> + .index = 2, /* video layer */
> + .priority = 1
> + }, {
> + .index = 0, /* layer0 */
> + .priority = 2
> + }, {
> + .index = 1, /* layer1 */
> + .priority = 3
> + }
> +};
> +
I feel there is no reason to split config, actually video layer exists
and video layer isn't enabled if no vp even if we use 3 layer.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
