Hello Inki, Inki Dae wrote: > Hi, > > 2015-05-09 6:51 GMT+09:00 Tobias Jakobi <liquid.acid@xxxxxxx>: >> Hello, >> >> I've tested this on my Hardkernel Odroid-X2 (connected via HDMI to a >> 1080p panel). >> >> Run the usual modetest tests (just primary plane, primary plane with >> vsync, primary plane with overlay, primary plane with overlay and video >> overlay, overlay partially outside of crtc area, etc.) and haven't >> noticed any issues so far. > > As I mentioned several times, it works well in case that only one crtc > driver is enabled. Could you check it again after you enable two or > more crtc drivers such as FIMD and HDMI or FIMD, HDMI and VIDI > together? For this, dts file for X2 should contain their device nodes > and also should be configurated though menuconfig. I've enabled VIDI and FIMD and confirmed that they should up properly in modetest before applying the series. Booting with the atomic series works fine, but I get a segfault when calling modetest. I've attached the kernel log below. >> Kernel log is 'clean', so the series works fine for me. >> >> You can add my >> Tested-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx> > > So you didn't test it correctly yet. I tested the common usage scenario. In fact I can't really test with FIMD anyway, since I don't have any panel that I can attach to the LCD expansion port. Regardless of whether the kernel oopses or anything with atomic, I can never make sure that the FIMD visuals are actually correct. With best wishes, Tobias > Thanks, > Inki Dae > Kernel log (after triggering segfault with modetest): > liquid@chidori ~/sourcecode/video/drm/tests/modetest $ dmesg > [ 0.000000] Booting Linux on physical CPU 0xa00 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.1.0-rc2-debug+ (liquid@chidori) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #4 SMP PREEMPT Sat May 9 05:11:08 CEST 2015 > [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache > [ 0.000000] Machine model: Hardkernel ODROID-X2 board based on Exynos4412 > [ 0.000000] earlycon: no match for ttySAC1,115200n8 > [ 0.000000] bootconsole [earlycon0] enabled > [ 0.000000] Reserved memory: created CMA memory pool at 0x77000000, size 16 MiB > [ 0.000000] Reserved memory: initialized node region@77000000, compatible id shared-dma-pool > [ 0.000000] Reserved memory: created CMA memory pool at 0x78000000, size 16 MiB > [ 0.000000] Reserved memory: initialized node region@78000000, compatible id shared-dma-pool > [ 0.000000] cma: Reserved 128 MiB at 0xb7c00000 > [ 0.000000] Memory policy: Data cache writealloc > [ 0.000000] Samsung CPU ID: 0xe4412220 > [ 0.000000] On node 0 totalpages: 524032 > [ 0.000000] free_area_init_node: node 0, pgdat c0712980, node_mem_map ee7f5000 > [ 0.000000] Normal zone: 1520 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 > [ 0.000000] Running under secure firmware. > [ 0.000000] PERCPU: Embedded 12 pages/cpu @ee786000 s17600 r8192 d23360 u49152 > [ 0.000000] pcpu-alloc: s17600 r8192 d23360 u49152 alloc=12*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 > [ 0.000000] Kernel command line: video=HDMI-A-1:1280x720M@60 console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro earlyprintk > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Memory: 1907080K/2096128K available (5067K kernel code, 230K rwdata, 1696K rodata, 228K init, 255K bss, 25208K reserved, 163840K cma-reserved, 1154048K highmem) > [ 0.000000] Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) > lowmem : 0xc0000000 - 0xef800000 ( 760 MB) > pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > .text : 0xc0008000 - 0xc06a2fb4 (6764 kB) > .init : 0xc06a3000 - 0xc06dc000 ( 228 kB) > .data : 0xc06dc000 - 0xc0715a18 ( 231 kB) > .bss : 0xc0718000 - 0xc0757d28 ( 256 kB) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x3e470001 > [ 0.000000] L2C: platform provided aux values permit register corruption. > [ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3e470001 > [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 > [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 > [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines > [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled > [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB > [ 0.000000] L2C-310: CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001 > [ 0.000000] Exynos4x12 clocks: sclk_apll = 1000000000, sclk_mpll = 800000000 > sclk_epll = 96000000, sclk_vpll = 350000000, arm_clk = 1000000000 > [ 0.000000] Switching to timer-based delay loop, resolution 41ns > [ 0.000000] clocksource mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns > [ 0.000004] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns > [ 0.008102] Console: colour dummy device 80x30 > [ 0.012477] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) > [ 0.022869] pid_max: default: 32768 minimum: 301 > [ 0.027653] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.034253] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.041876] Initializing cgroup subsys devices > [ 0.046262] CPU: Testing write buffer coherency: ok > [ 0.051455] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00 > [ 0.057537] Setting up static identity map for 0x40008240 - 0x40008298 > [ 0.100275] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01 > [ 0.110261] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02 > [ 0.120255] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03 > [ 0.120323] Brought up 4 CPUs > [ 0.140659] SMP: Total of 4 processors activated (192.00 BogoMIPS). > [ 0.146993] CPU: All CPU(s) started in SVC mode. > [ 0.152261] devtmpfs: initialized > [ 0.156913] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 > [ 0.164971] lcd0-power-domain@10023C80 has as child subdomain: tv-power-domain@10023C20. > [ 0.173550] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns > [ 0.188296] pinctrl core: initialized pinctrl subsystem > [ 0.193978] regulator-dummy: no parameters > [ 0.217531] NET: Registered protocol family 16 > [ 0.223901] DMA: preallocated 256 KiB pool for atomic coherent allocations > [ 0.249814] cpuidle: using governor ladder > [ 0.264814] cpuidle: using governor menu > [ 0.282638] exynos-audss-clk 3810000.clock-controller: setup completed > [ 0.319093] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. > [ 0.327028] hw-breakpoint: maximum watchpoint size is 4 bytes. > [ 0.342381] sysvdd: 5000 mV > [ 0.342441] reg-fixed-voltage regulators:regulator@0: sysvdd supplying 5000000uV > [ 0.342800] p3v3: 3300 mV > [ 0.342852] reg-fixed-voltage regulators:regulator@1: p3v3 supplying 3300000uV > [ 0.343165] p3v3_en: GPIO 9 is already used > [ 0.343184] p3v3_en: 3300 mV > [ 0.343238] reg-fixed-voltage regulator_p3v3: p3v3_en supplying 3300000uV > [ 0.344896] SCSI subsystem initialized > [ 0.348809] usbcore: registered new interface driver usbfs > [ 0.354306] usbcore: registered new interface driver hub > [ 0.359991] usbcore: registered new device driver usb > [ 0.365659] s3c-i2c 13860000.i2c: slave address 0x10 > [ 0.370560] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz > [ 0.378650] max77686-pmic max77686-pmic: max77686_pmic_probe > [ 0.379376] vdd_alive_1.0V: 1000 mV > [ 0.380142] vddq_m1_m2_1.8V: 1800 mV > [ 0.380879] vddq_ext_1.8V: 1800 mV > [ 0.381613] vddq_mmc2_2.8V: 2800 mV > [ 0.382365] vddq_mmc1_mmc3_1.8V: 1800 mV > [ 0.383103] vdd_mpll_1.0V: 1000 mV > [ 0.383853] vdd_epll_1.0V: 1000 mV > [ 0.384455] vdd_hdmi_1.0V: 1000 mV > [ 0.385219] vt_core_1.0V: 1000 mV > [ 0.385823] vddq_mipihsi_1.8V: 1800 mV > [ 0.386564] vdd_abb1_1.8V: 1800 mV > [ 0.387332] vdd_usb_otg_3.3V: 3300 mV > [ 0.388084] vddq_c2c_w_1.8V: 1800 mV > [ 0.388835] vdd_abb0_abb2_1.8V: 1800 mV > [ 0.389588] vdd_otg_hsic_1.0V: 1000 mV > [ 0.390337] vdd_hsic_1.8V: 1800 mV > [ 0.390967] vddq_cam_1.8V: 1800 mV > [ 0.391730] vddq_isp_1.8V: 1800 mV > [ 0.392345] vt_cam_1.8V: 1800 mV > [ 0.393212] vddq_emmc_1.8V: 1800 <--> 3000 mV at 1800 mV > [ 0.394094] tflash_2.8V: 2800 mV > [ 0.394749] unused_2.8V: 2800 mV > [ 0.395386] vdd_touch_2.8V: 2800 mV > [ 0.396009] vdd_touchled_3.3V: 3300 mV > [ 0.396781] vddq_lcd_1.8V: 1800 mV > [ 0.397404] vdd_motor_3.0V: 3000 mV > [ 0.398166] vdd_mif: 850 <--> 1100 mV at 1100 mV > [ 0.398926] vdd_arm: 900 <--> 1400 mV at 1037 mV > [ 0.399686] vdd_int: 850 <--> 1150 mV at 1000 mV > [ 0.400321] vdd_g3d: 50mV offset > [ 0.401097] vddq_ckem1_1.2V: 1200 mV > [ 0.401890] input_ldo_1.35V: 1350 mV > [ 0.402670] input_ldo_2.0V: 2000 mV > [ 0.403289] vddf_emmc_2.85V: 2850 mV > [ 0.404054] io_1.2V: 1200 mV > [ 0.404442] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter > [ 0.409941] s3c-i2c 13870000.i2c: slave address 0x10 > [ 0.414835] s3c-i2c 13870000.i2c: bus frequency set to 390 KHz > [ 0.421169] s3c-i2c 13870000.i2c: i2c-1: S3C I2C adapter > [ 0.426581] s3c-i2c 13880000.i2c: slave address 0x00 > [ 0.431474] s3c-i2c 13880000.i2c: bus frequency set to 97 KHz > [ 0.437534] s3c-i2c 13880000.i2c: i2c-2: S3C I2C adapter > [ 0.442905] s3c-i2c 138e0000.i2c: slave address 0x00 > [ 0.447809] s3c-i2c 138e0000.i2c: bus frequency set to 97 KHz > [ 0.454028] s3c-i2c 138e0000.i2c: i2c-8: S3C I2C adapter > [ 0.459490] Linux video capture interface: v2.00 > [ 0.464682] Advanced Linux Sound Architecture Driver Initialized. > [ 0.471666] Switched to clocksource mct-frc > [ 0.491175] NET: Registered protocol family 2 > [ 0.496182] TCP established hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.503240] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > [ 0.509948] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.516298] UDP hash table entries: 512 (order: 2, 24576 bytes) > [ 0.522262] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) > [ 0.528879] NET: Registered protocol family 1 > [ 0.533652] CPU PMU: Failed to parse <no-node>/interrupt-affinity[0] > [ 0.539981] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available > [ 0.552811] futex hash table entries: 1024 (order: 4, 65536 bytes) > [ 0.559052] audit: initializing netlink subsys (disabled) > [ 0.564437] audit: type=2000 audit(0.535:1): initialized > [ 0.585260] alg: No test for stdrng (krng) > [ 0.617700] bounce: pool size: 64 pages > [ 0.621703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > [ 0.629039] io scheduler noop registered > [ 0.633026] io scheduler deadline registered > [ 0.637703] io scheduler cfq registered (default) > [ 0.642891] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply from device tree > [ 0.642907] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply property in node /exynos-usbphy@125B0000 failed > [ 0.643115] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply from device tree > [ 0.643129] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply property in node /exynos-usbphy@125B0000 failed > [ 0.643291] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply from device tree > [ 0.643304] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply property in node /exynos-usbphy@125B0000 failed > [ 0.643471] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply from device tree > [ 0.643485] samsung-usb2-phy 125b0000.exynos-usbphy: Looking up phy-supply property in node /exynos-usbphy@125B0000 failed > [ 0.649998] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-141330 > [ 0.656639] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 > [ 0.670196] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-141330 > [ 0.676840] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 > [ 0.686800] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-141330 > [ 0.693432] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 > [ 0.702961] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 70, base_baud = 0) is a S3C6400/10 > [ 0.712302] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 71, base_baud = 0) is a S3C6400/10 > [ 0.721180] console [ttySAC1] enabled > [ 0.728499] bootconsole [earlycon0] disabled > [ 0.737620] 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 72, base_baud = 0) is a S3C6400/10 > [ 0.741352] 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 73, base_baud = 0) is a S3C6400/10 > [ 0.750813] [drm] Initialized drm 1.1.0 20060810 > [ 0.759713] exynos-hdmi 12d00000.hdmi: Looking up vdd-supply from device tree > [ 0.759807] exynos-hdmi 12d00000.hdmi: Looking up vdd_osc-supply from device tree > [ 0.759878] exynos-hdmi 12d00000.hdmi: Looking up vdd_pll-supply from device tree > [ 0.759945] exynos-hdmi 12d00000.hdmi: Looking up hdmi-en-supply from device tree > [ 0.759958] exynos-hdmi 12d00000.hdmi: Looking up hdmi-en-supply property in node /hdmi@12D00000 failed > [ 0.759983] 12d00000.hdmi supply hdmi-en not found, using dummy regulator > [ 0.762761] s5p-g2d 10800000.g2d: The exynos g2d(ver 4.1) successfully probed > [ 0.770698] exynos-drm-fimc 11820000.fimc: drm fimc registered successfully. > [ 0.776400] exynos-drm-fimc 11830000.fimc: drm fimc registered successfully. > [ 0.783136] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. > [ 0.790616] exynos-drm exynos-drm: bound exynos-drm-vidi (ops vidi_component_ops) > [ 0.798083] exynos-sysmmu 11e20000.sysmmu: Enabled > [ 0.798099] exynos4-fb 11c00000.fimd: exynos_iommu_attach_device: Attached IOMMU with pgtable 0x6d950000 > [ 0.798117] exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) > [ 0.804690] exynos-sysmmu 12e20000.sysmmu: Enabled > [ 0.804704] exynos-mixer 12c10000.mixer: exynos_iommu_attach_device: Attached IOMMU with pgtable 0x6d950000 > [ 0.804735] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) > [ 0.811804] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) > [ 0.818780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 0.825370] [drm] No driver support for vblank timestamp query. > [ 0.831580] exynos-sysmmu 10a40000.sysmmu: Enabled > [ 0.831594] s5p-g2d 10800000.g2d: exynos_iommu_attach_device: Attached IOMMU with pgtable 0x6d950000 > [ 0.832024] exynos-sysmmu 11a40000.sysmmu: Enabled > [ 0.832037] exynos-drm-fimc 11820000.fimc: exynos_iommu_attach_device: Attached IOMMU with pgtable 0x6d950000 > [ 0.832069] exynos-sysmmu 11a50000.sysmmu: Enabled > [ 0.832081] exynos-drm-fimc 11830000.fimc: exynos_iommu_attach_device: Attached IOMMU with pgtable 0x6d950000 > [ 0.869747] exynos-drm exynos-drm: fb0: frame buffer device > [ 0.869817] exynos-drm exynos-drm: registered panic notifier > [ 0.875429] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > [ 0.885490] loop: module loaded > [ 0.886394] usbcore: registered new interface driver smsc95xx > [ 0.890357] dwc2 12480000.hsotg: registering common handler for irq67 > [ 0.890455] dwc2 12480000.hsotg: mapped PA 12480000 to VA f01c0000 > [ 0.890609] dwc2 12480000.hsotg: NonPeriodic TXFIFO size: 1024 > [ 0.890619] dwc2 12480000.hsotg: RXFIFO size: 2048 > [ 0.890629] dwc2 12480000.hsotg: Periodic TXFIFO 0 size: 0 > [ 0.890638] dwc2 12480000.hsotg: Periodic TXFIFO 1 size: 256 > [ 0.890646] dwc2 12480000.hsotg: Periodic TXFIFO 2 size: 256 > [ 0.890655] dwc2 12480000.hsotg: Periodic TXFIFO 3 size: 256 > [ 0.890664] dwc2 12480000.hsotg: Periodic TXFIFO 4 size: 256 > [ 0.890672] dwc2 12480000.hsotg: Periodic TXFIFO 5 size: 768 > [ 0.890680] dwc2 12480000.hsotg: Periodic TXFIFO 6 size: 768 > [ 0.890689] dwc2 12480000.hsotg: Periodic TXFIFO 7 size: 768 > [ 0.890697] dwc2 12480000.hsotg: Periodic TXFIFO 8 size: 768 > [ 0.890706] dwc2 12480000.hsotg: Periodic TXFIFO 9 size: 0 > [ 0.890714] dwc2 12480000.hsotg: Periodic TXFIFO10 size: 0 > [ 0.890723] dwc2 12480000.hsotg: Periodic TXFIFO11 size: 0 > [ 0.890731] dwc2 12480000.hsotg: Periodic TXFIFO12 size: 0 > [ 0.890740] dwc2 12480000.hsotg: Periodic TXFIFO13 size: 0 > [ 0.890748] dwc2 12480000.hsotg: Periodic TXFIFO14 size: 0 > [ 0.890756] dwc2 12480000.hsotg: Periodic TXFIFO15 size: 0 > [ 0.890845] dwc2 12480000.hsotg: Looking up vusb_d-supply from device tree > [ 0.891134] dwc2 12480000.hsotg: Looking up vusb_a-supply from device tree > [ 0.891412] dwc2 12480000.hsotg: pdev 0xee29a600 > [ 0.916698] dwc2 12480000.hsotg: resetting core > [ 0.916710] dwc2 12480000.hsotg: reset successful > [ 0.916759] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM > [ 0.918510] dwc2 12480000.hsotg: GRXFSIZ=0x00001f00, GNPTXFSIZ=0x03001f00 > [ 0.918522] dwc2 12480000.hsotg: FIFOs reset, timeout at 100 > [ 0.919174] dwc2 12480000.hsotg: DCFG=0x08200000, DCTL=0x00000002, DIEPMSK=0000000f > [ 0.926168] dwc2 12480000.hsotg: GAHBCFG=0x00000000, GHWCFG1=0x00000000 > [ 0.932761] dwc2 12480000.hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x04000800 > [ 0.939529] dwc2 12480000.hsotg: DPTx[1] FSize=256, StAddr=0x00000c00 > [ 0.945953] dwc2 12480000.hsotg: DPTx[2] FSize=256, StAddr=0x00000d00 > [ 0.952376] dwc2 12480000.hsotg: DPTx[3] FSize=256, StAddr=0x00000e00 > [ 0.958799] dwc2 12480000.hsotg: DPTx[4] FSize=256, StAddr=0x00000f00 > [ 0.965221] dwc2 12480000.hsotg: DPTx[5] FSize=768, StAddr=0x00001000 > [ 0.971645] dwc2 12480000.hsotg: DPTx[6] FSize=768, StAddr=0x00001300 > [ 0.978071] dwc2 12480000.hsotg: DPTx[7] FSize=768, StAddr=0x00001600 > [ 0.984492] dwc2 12480000.hsotg: DPTx[8] FSize=768, StAddr=0x00001900 > [ 0.990915] dwc2 12480000.hsotg: DPTx[9] FSize=768, StAddr=0x00003a00 > [ 0.997339] dwc2 12480000.hsotg: DPTx[10] FSize=768, StAddr=0x00003d00 > [ 1.003848] dwc2 12480000.hsotg: DPTx[11] FSize=768, StAddr=0x00004000 > [ 1.010359] dwc2 12480000.hsotg: DPTx[12] FSize=768, StAddr=0x00004300 > [ 1.016869] dwc2 12480000.hsotg: DPTx[13] FSize=768, StAddr=0x00004600 > [ 1.023378] dwc2 12480000.hsotg: DPTx[14] FSize=768, StAddr=0x00004900 > [ 1.029895] dwc2 12480000.hsotg: DPTx[15] FSize=768, StAddr=0x00004c00 > [ 1.036400] dwc2 12480000.hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0xfaea717b > [ 1.044560] dwc2 12480000.hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x463c36f1 > [ 1.052805] dwc2 12480000.hsotg: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xc1c96fe3 > [ 1.060964] dwc2 12480000.hsotg: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0a5ff495 > [ 1.069210] dwc2 12480000.hsotg: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x157e47e4 > [ 1.077369] dwc2 12480000.hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xf86e1204 > [ 1.085615] dwc2 12480000.hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x1165f7ee > [ 1.093774] dwc2 12480000.hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x1826c196 > [ 1.102020] dwc2 12480000.hsotg: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xed08cae0 > [ 1.110179] dwc2 12480000.hsotg: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x10d40640 > [ 1.118425] dwc2 12480000.hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x5d89bf7a > [ 1.126584] dwc2 12480000.hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xa2448680 > [ 1.134830] dwc2 12480000.hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x3ffe411c > [ 1.142990] dwc2 12480000.hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x4b8c6202 > [ 1.151236] dwc2 12480000.hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x1973d37f > [ 1.159395] dwc2 12480000.hsotg: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x2541e654 > [ 1.167641] dwc2 12480000.hsotg: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xbfde1ff2 > [ 1.175800] dwc2 12480000.hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x27341467 > [ 1.184051] dwc2 12480000.hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xd335fffd > [ 1.192207] dwc2 12480000.hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xc8843b0d > [ 1.200452] dwc2 12480000.hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xf66f29f7 > [ 1.208698] dwc2 12480000.hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x9ba428e6 > [ 1.217031] dwc2 12480000.hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xbb1f9b9d > [ 1.225276] dwc2 12480000.hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0d34b128 > [ 1.233609] dwc2 12480000.hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xf177e671 > [ 1.241856] dwc2 12480000.hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x85725105 > [ 1.250188] dwc2 12480000.hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xe1557ecb > [ 1.258434] dwc2 12480000.hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x8b013e1b > [ 1.266766] dwc2 12480000.hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x37e77bee > [ 1.275012] dwc2 12480000.hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x29a24008 > [ 1.283346] dwc2 12480000.hsotg: ep15-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x95c8ddee > [ 1.291591] dwc2 12480000.hsotg: ep15-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x10402de7 > [ 1.299923] dwc2 12480000.hsotg: DVBUSDIS=0x000017d7, DVBUSPULSE=000005b8 > [ 1.306912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.313213] ehci-exynos: EHCI EXYNOS driver > [ 1.317878] exynos-ehci 12580000.ehci: EHCI Host Controller > [ 1.322958] exynos-ehci 12580000.ehci: new USB bus registered, assigned bus number 1 > [ 1.330955] exynos-ehci 12580000.ehci: irq 68, io mem 0x12580000 > [ 1.341699] exynos-ehci 12580000.ehci: USB 2.0 started, EHCI 1.00 > [ 1.342894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.349490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.356694] usb usb1: Product: EHCI Host Controller > [ 1.361534] usb usb1: Manufacturer: Linux 4.1.0-rc2-debug+ ehci_hcd > [ 1.367802] usb usb1: SerialNumber: 12580000.ehci > [ 1.373360] hub 1-0:1.0: USB hub found > [ 1.376235] hub 1-0:1.0: 3 ports detected > [ 1.381237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.386397] ohci-exynos: OHCI EXYNOS driver > [ 1.391074] usb3503 0-0008: Looking up ext-supply from device tree > [ 1.391088] usb3503 0-0008: Looking up ext-supply property in node /i2c@13860000/usb3503@08 failed > [ 1.606796] usb3503 0-0008: switched to HUB mode > [ 1.606855] usb3503 0-0008: usb3503_probe: probed in hub mode > [ 1.612295] max77686-rtc max77686-rtc: max77686_rtc_probe > [ 1.716735] usb 1-2: new high-speed USB device number 2 using exynos-ehci > [ 1.718456] rtc rtc0: max77686-rtc: dev (254:0) > [ 1.718479] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0 > [ 1.726018] s3c-rtc 10070000.rtc: s3c2410_rtc: tick irq 65, alarm irq 64 > [ 1.726123] s3c-rtc 10070000.rtc: failed to find rtc source clock > [ 1.731625] i2c /dev entries driver > [ 1.736264] exynos-tmu 100c0000.tmu: Looking up vtmu-supply from device tree > [ 1.737858] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled > [ 1.743829] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@xxxxxxxxxx > [ 1.753589] sdhci: Secure Digital Host Controller Interface driver > [ 1.757553] sdhci: Copyright(c) Pierre Ossman > [ 1.762233] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (100000000 Hz) > [ 1.769400] s3c-sdhci 12530000.sdhci: Got CD GPIO > [ 1.774315] s3c-sdhci 12530000.sdhci: Looking up vmmc-supply from device tree > [ 1.774370] s3c-sdhci 12530000.sdhci: Looking up vqmmc-supply from device tree > [ 1.801804] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA > [ 1.803615] Synopsys Designware Multimedia Card Interface Driver > [ 1.810179] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode. > [ 1.816396] dwmmc_exynos 12550000.mmc: Using internal DMA controller. > [ 1.822753] dwmmc_exynos 12550000.mmc: Version ID is 240a > [ 1.828160] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 120, 32 bit host data width, 128 deep fifo > [ 1.837784] dwmmc_exynos 12550000.mmc: Looking up vmmc-supply from device tree > [ 1.837835] dwmmc_exynos 12550000.mmc: Looking up vqmmc-supply from device tree > [ 1.838022] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq > [ 1.847021] usb 1-2: New USB device found, idVendor=0424, idProduct=3503 > [ 1.849991] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 1.857677] hub 1-2:1.0: USB hub found > [ 1.860896] hub 1-2:1.0: 3 ports detected > [ 1.871734] dwmmc_exynos 12550000.mmc: 1 slots initialized > [ 1.872744] alg: skcipher: encryption failed on test 1 for ecb-aes-s5p: ret=22 > [ 1.878884] s5p-sss driver registered > [ 1.882581] hidraw: raw HID events driver (C) Jiri Kosina > [ 1.887989] usbcore: registered new interface driver usbhid > [ 1.893384] usbhid: USB HID core driver > [ 1.897650] exynos-memory-bus memory_bus@0: Looking up vdd-mem-supply from device tree > [ 1.897892] exynos-memory-bus memory_bus@0: unable to get devfreq-event device : ppmu-event3-dmc0 > [ 1.906108] exynos-memory-bus memory_bus@0: failed to initialize memory-bus > [ 1.913094] exynos-memory-bus memory_bus@1: Looking up vdd-mem-supply from device tree > [ 1.913300] exynos-memory-bus memory_bus@1: unable to get devfreq-event device : ppmu-event3-leftbus > [ 1.922157] exynos-memory-bus memory_bus@1: failed to initialize memory-bus > [ 1.932582] oprofile: using arm/armv7-ca9 > [ 1.933680] NET: Registered protocol family 10 > [ 1.937986] sit: IPv6 over IPv4 tunneling driver > [ 1.942596] NET: Registered protocol family 17 > [ 1.946602] ThumbEE CPU extension supported. > [ 1.950753] Registering SWP/SWPB emulation handler > [ 1.956569] s3c-rtc 10070000.rtc: s3c2410_rtc: tick irq 65, alarm irq 64 > [ 1.956916] s3c-rtc 10070000.rtc: s3c2410_rtc: RTCCON=01 > [ 1.956972] s3c-rtc 10070000.rtc: read time 2015.02.17 07:06:53 > [ 1.956995] s3c-rtc 10070000.rtc: read time 2015.02.17 07:06:53 > [ 1.957006] s3c-rtc 10070000.rtc: read alarm 0, 1900.00.00 00:00:00 > [ 1.957016] s3c-rtc 10070000.rtc: read time 2015.02.17 07:06:53 > [ 1.957023] rtc rtc1: alarm rollover: day > [ 1.957033] s3c-rtc 10070000.rtc: read time 2015.02.17 07:06:53 > [ 1.957205] rtc rtc1: s3c: dev (254:1) > [ 1.957219] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 > [ 1.962037] exynos-memory-bus memory_bus@0: Looking up vdd-mem-supply from device tree > [ 1.962624] exynos-memory-bus memory_bus@1: Looking up vdd-mem-supply from device tree > [ 1.986841] max98090 1-0010: MAX98090 REVID=0x43 > [ 1.991838] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok > [ 1.995035] input: gpio_keys as /devices/platform/gpio_keys/input/input0 > [ 2.016336] vdd_hdmi_1.0V: disabling > [ 2.017365] ALSA device list: > [ 2.017400] #0: Odroid-X2 > [ 2.020316] Waiting for root device /dev/mmcblk0p2... > [ 2.068120] mmc0: new high speed SDXC card at address aaaa > [ 2.068524] mmcblk0: mmc0:aaaa SE64G 59.4 GiB > [ 2.073463] mmcblk0: p1 p2 p3 > [ 2.136398] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) > [ 2.138872] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. > [ 2.145739] Freeing unused kernel memory: 228K (c06a3000 - c06dc000) > [ 2.146787] usb 1-2.1: new high-speed USB device number 3 using exynos-ehci > [ 2.252221] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514 > [ 2.253473] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 2.262134] hub 1-2.1:1.0: USB hub found > [ 2.264949] hub 1-2.1:1.0: 5 ports detected > [ 2.351966] usb 1-2.2: new high-speed USB device number 4 using exynos-ehci > [ 2.462315] usb 1-2.2: New USB device found, idVendor=8564, idProduct=1000 > [ 2.463559] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 2.470879] usb 1-2.2: Product: Mass Storage Device > [ 2.475844] usb 1-2.2: Manufacturer: JetFlash > [ 2.480098] usb 1-2.2: SerialNumber: 059FKI3OMNH24FV4 > [ 2.566973] usb 1-2.1.1: new high-speed USB device number 5 using exynos-ehci > [ 2.672331] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00 > [ 2.673746] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 2.684870] smsc95xx v1.0.4 > [ 2.736342] smsc95xx 1-2.1.1:1.0 eth0: register 'smsc95xx' at usb-12580000.ehci-2.1.1, smsc95xx USB 2.0 Ethernet, ae:74:f4:b9:9c:4c > [ 2.826794] usb 1-2.1.3: new full-speed USB device number 6 using exynos-ehci > [ 2.935809] usb 1-2.1.3: New USB device found, idVendor=0b05, idProduct=17cb > [ 2.937269] usb 1-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 2.944751] usb 1-2.1.3: Product: BCM20702A0 > [ 2.948981] usb 1-2.1.3: Manufacturer: Broadcom Corp > [ 2.953943] usb 1-2.1.3: SerialNumber: 000272C64311 > [ 3.910324] systemd-udevd[1035]: starting version 216 > [ 3.956260] random: systemd-udevd urandom read with 40 bits of entropy available > [ 4.166911] s5p-jpeg 11840000.jpeg-codec: sclk clock not available > [ 4.167137] s5p-jpeg 11840000.jpeg-codec: encoder device registered as /dev/video0 > [ 4.167312] s5p-jpeg 11840000.jpeg-codec: decoder device registered as /dev/video1 > [ 4.167317] s5p-jpeg 11840000.jpeg-codec: Samsung S5P JPEG codec > [ 4.220028] usb-storage 1-2.2:1.0: USB Mass Storage device detected > [ 4.220486] scsi host0: usb-storage 1-2.2:1.0 > [ 4.227433] usbcore: registered new interface driver usb-storage > [ 4.261527] Bluetooth: Core ver 2.20 > [ 4.261588] NET: Registered protocol family 31 > [ 4.261594] Bluetooth: HCI device and connection manager initialized > [ 4.261613] Bluetooth: HCI socket layer initialized > [ 4.261625] Bluetooth: L2CAP socket layer initialized > [ 4.262569] Bluetooth: SCO socket layer initialized > [ 4.321779] usbcore: registered new interface driver btusb > [ 4.328530] Bluetooth: hci0: BCM: chip id 63 > [ 4.329532] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 > [ 4.342542] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2 > [ 4.342559] Bluetooth: hci0: BCM: patch brcm/BCM20702A1-0b05-17cb.hcd not found > [ 5.607589] scsi 0:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6 > [ 5.609550] sd 0:0:0:0: [sda] 61702144 512-byte logical blocks: (31.5 GB/29.4 GiB) > [ 5.610410] sd 0:0:0:0: [sda] Write Protect is off > [ 5.610419] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 > [ 5.611308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 5.626977] sda: sda1 sda2 sda3 > [ 5.631039] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 5.976906] raid6: int32x1 gen() 253 MB/s > [ 6.061767] raid6: int32x1 xor() 219 MB/s > [ 6.146703] raid6: int32x2 gen() 344 MB/s > [ 6.231703] raid6: int32x2 xor() 263 MB/s > [ 6.316761] raid6: int32x4 gen() 397 MB/s > [ 6.401717] raid6: int32x4 xor() 273 MB/s > [ 6.486674] raid6: int32x8 gen() 393 MB/s > [ 6.571969] raid6: int32x8 xor() 254 MB/s > [ 6.656781] raid6: neonx1 gen() 1046 MB/s > [ 6.741728] raid6: neonx2 gen() 1446 MB/s > [ 6.826739] raid6: neonx4 gen() 1503 MB/s > [ 6.909713] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) > [ 6.911704] raid6: neonx8 gen() 1042 MB/s > [ 6.911719] raid6: using algorithm neonx4 gen() 1503 MB/s > [ 6.911731] raid6: using intx1 recovery algorithm > [ 6.923619] xor: measuring software checksum speed > [ 6.971708] arm4regs : 2887.200 MB/sec > [ 7.021701] 8regs : 1896.800 MB/sec > [ 7.071699] 32regs : 1459.200 MB/sec > [ 7.121697] neon : 1756.800 MB/sec > [ 7.121709] xor: using function: arm4regs (2887.200 MB/sec) > [ 7.229707] Btrfs loaded > [ 7.232454] BTRFS: device label odroid_portage devid 1 transid 473 /dev/sda1 > [ 7.259786] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem > [ 7.271365] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) > [ 7.286692] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) > [ 7.289609] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem > [ 7.303613] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) > [ 7.645277] random: nonblocking pool is initialized > [ 9.578598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 9.578626] Bluetooth: BNEP socket layer initialized > [ 9.842243] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. > [ 9.865029] device br0 entered promiscuous mode > [ 13.865314] smsc95xx 1-2.1.1:1.0 eth0: hardware isn't capable of remote wakeup > [ 13.865405] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 34.735378] device bnep0 entered promiscuous mode > [ 34.737823] br0: port 1(bnep0) entered forwarding state > [ 34.737920] br0: port 1(bnep0) entered forwarding state > [ 34.744828] ------------[ cut here ]------------ > [ 34.744903] WARNING: CPU: 1 PID: 2276 at kernel/sched/core.c:7291 __might_sleep+0x94/0xa0() > [ 34.744957] do not call blocking ops when !TASK_RUNNING; state=1 set at [<bf245250>] bnep_session+0xa4/0x858 [bnep] > [ 34.744981] Modules linked in: cmac ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb btbcm btintel bluetooth usb_storage s5p_jpeg videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core > [ 34.745233] CPU: 1 PID: 2276 Comm: kbnepd bnep0 Not tainted 4.1.0-rc2-debug+ #4 > [ 34.745257] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 34.745277] Backtrace: > [ 34.745341] [<c0013270>] (dump_backtrace) from [<c0013488>] (show_stack+0x18/0x1c) > [ 34.745363] r6:c06f9a08 r5:ffffffff r4:00000000 r3:dc8ba300 > [ 34.745454] [<c0013470>] (show_stack) from [<c04f1d98>] (dump_stack+0x88/0xc8) > [ 34.745502] [<c04f1d10>] (dump_stack) from [<c002e634>] (warn_slowpath_common+0x88/0xb8) > [ 34.745522] r6:c0604f3c r5:00001c7b r4:edbb3da8 r3:dc8ba300 > [ 34.745597] [<c002e5ac>] (warn_slowpath_common) from [<c002e69c>] (warn_slowpath_fmt+0x38/0x40) > [ 34.745617] r8:edb56c00 r7:c0713770 r6:00000000 r5:00000943 r4:c06648d8 > [ 34.745703] [<c002e668>] (warn_slowpath_fmt) from [<c004e068>] (__might_sleep+0x94/0xa0) > [ 34.745722] r3:00000001 r2:c0605064 > [ 34.745780] [<c004dfd4>] (__might_sleep) from [<c040ce7c>] (lock_sock_nested+0x28/0x6c) > [ 34.745801] r7:00000004 r6:edba2c00 r5:edba2460 r4:edba2400 > [ 34.745996] [<c040ce54>] (lock_sock_nested) from [<bf06a474>] (l2cap_sock_sendmsg+0x48/0xe4 [bluetooth]) > [ 34.746020] r5:ec12ad2c r4:edba2400 > [ 34.746183] [<bf06a42c>] (l2cap_sock_sendmsg [bluetooth]) from [<c04097e8>] (sock_sendmsg+0x1c/0x2c) > [ 34.746213] r8:edb56c00 r7:ec12a800 r6:edba248c r5:ec8748c0 r4:ec12ad2c r3:bf06a42c > [ 34.746342] [<c04097cc>] (sock_sendmsg) from [<c04098ec>] (kernel_sendmsg+0x38/0x40) > [ 34.746405] [<c04098b4>] (kernel_sendmsg) from [<bf245050>] (bnep_send_rsp+0x50/0x58 [bnep]) > [ 34.746431] r5:ec8748c0 r4:00000100 > [ 34.746514] [<bf245000>] (bnep_send_rsp [bnep]) from [<bf2450d4>] (bnep_rx_control+0x7c/0x154 [bnep]) > [ 34.746542] r5:00000001 r4:ec12ad00 > [ 34.746815] [<bf245058>] (bnep_rx_control [bnep]) from [<bf245820>] (bnep_session+0x674/0x858 [bnep]) > [ 34.746846] r5:00000001 r4:ec12ad00 > [ 34.746940] [<bf2451ac>] (bnep_session [bnep]) from [<c0048ae8>] (kthread+0xf4/0x110) > [ 34.746961] r10:00000000 r9:00000000 r8:00000000 r7:bf2451ac r6:ec12ad00 r5:00000000 > [ 34.747031] r4:ec0d2d00 > [ 34.747086] [<c00489f4>] (kthread) from [<c000fac0>] (ret_from_fork+0x14/0x34) > [ 34.747106] r7:00000000 r6:00000000 r5:c00489f4 r4:ec0d2d00 > [ 34.747167] ---[ end trace 2dd031423862af06 ]--- > [ 133.283940] Unable to handle kernel NULL pointer dereference at virtual address 000000a4 > [ 133.283962] pgd = ec35c000 > [ 133.283976] [000000a4] *pgd=6c32d831, *pte=00000000, *ppte=00000000 > [ 133.284010] Internal error: Oops: 17 [#1] PREEMPT SMP ARM > [ 133.284084] Modules linked in: cmac ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb btbcm btintel bluetooth usb_storage s5p_jpeg videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core > [ 133.304170] CPU: 2 PID: 2430 Comm: lt-modetest Tainted: G W 4.1.0-rc2-debug+ #4 > [ 133.312582] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 133.318661] task: ec2af8c0 ti: ec166000 task.ti: ec166000 > [ 133.324053] PC is at exynos_plane_atomic_update+0x44/0x2a8 > [ 133.329520] LR is at drm_atomic_helper_commit_planes+0xd8/0x1bc > [ 133.335415] pc : [<c02b4130>] lr : [<c028c2ec>] psr: 60070053 > sp : ec167d38 ip : 00000000 fp : ec167d84 > [ 133.346868] r10: 00000001 r9 : ee32c400 r8 : 00000000 > [ 133.352077] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ee15a308 > [ 133.358587] r3 : 00000000 r2 : ec112580 r1 : 00000000 r0 : 00000000 > [ 133.365099] Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user > [ 133.372297] Control: 10c5387d Table: 6c35c04a DAC: 00000015 > [ 133.378025] Process lt-modetest (pid: 2430, stack limit = 0xec166218) > [ 133.384449] Stack: (0xec167d38 to 0xec168000) > [ 133.388790] 7d20: ee272800 00000000 > [ 133.396950] 7d40: ec112300 ee32c400 ec167d7c ec167d58 00000000 c02b1b54 ec112300 ec112300 > [ 133.405109] 7d60: 00000000 ee15a308 ed957780 c053d40c ee32c400 00000001 ec167dac ec167d88 > [ 133.413268] 7d80: c028c2ec c02b40f8 00000000 0000000b ec112300 00000000 ee272800 00000000 > [ 133.421427] 7da0: ec167dd4 ec167db0 c028e69c c028c220 c02b2774 ec112300 ee272800 ee100200 > [ 133.429586] 7dc0: 00000000 ee32c400 ec167de4 ec167dd8 c02b2788 c028e590 ec167dfc ec167de8 > [ 133.437745] 7de0: c02af91c c02b2780 00000003 ec112300 ec167e34 ec167e00 c028d24c c02af8dc > [ 133.445905] 7e00: c02aea0c c02ae484 00000000 00000000 00000028 00000001 ee32c400 ee100300 > [ 133.454064] 7e20: ee272800 00000000 ec167e54 ec167e38 c029f140 c028cf3c 00000000 00000028 > [ 133.462223] 7e40: 00000001 ee100200 ec167e8c ec167e58 c0290c28 c029f0ec ec167e7c ec167e68 > [ 133.470383] 7e60: c004fc84 ee272800 c0749014 ee272858 ee272800 ee272834 edbc4780 ee27294c > [ 133.478541] 7e80: ec167e9c ec167e90 c02b264c c0290b48 ec167eac ec167ea0 c02b105c c02b2630 > [ 133.486701] 7ea0: ec167ecc ec167eb0 c0294560 c02b1058 00000000 edb4c800 edb4c8a8 ee272858 > [ 133.494860] 7ec0: ec167f1c ec167ed0 c0294970 c0294530 c004fc84 ec102308 00000001 00000002 > [ 133.503019] 7ee0: ee272800 60070053 ee272954 ee102680 c004e03c ec102300 ee11b090 ee182e10 > [ 133.511178] 7f00: edc0dc78 ee11b090 00000008 00000000 ec167f5c ec167f20 c0103c14 c029463c > [ 133.519337] 7f20: 00000000 00000000 00000000 ec102308 ec167f54 ec2afcc4 00000000 c0718ef8 > [ 133.527497] 7f40: ec2af8c0 c000fbc4 ec166000 00000000 ec167f6c ec167f60 c0103dc4 c0103b80 > [ 133.535656] 7f60: ec167f8c ec167f70 c0047310 c0103dc0 ec166000 c000fbc4 ec167fb0 00000006 > [ 133.543815] 7f80: ec167fac ec167f90 c0012e88 c0047264 00000000 00000003 00000001 00000000 > [ 133.551974] 7fa0: 00000000 ec167fb0 c000fa64 c0012e0c 00000000 00000000 013b8450 00000000 > [ 133.560133] 7fc0: 00000003 00000001 00000000 00000006 000120a4 0001b354 be8fd2b3 00000000 > [ 133.568293] 7fe0: 00000000 be8fcda4 b6f1975c b6ef257c 60070050 00000003 00000000 00000000 > [ 133.576449] Backtrace: > [ 133.578887] [<c02b40ec>] (exynos_plane_atomic_update) from [<c028c2ec>] (drm_atomic_helper_commit_planes+0xd8/0x1bc) > [ 133.589383] r10:00000001 r9:ee32c400 r8:c053d40c r7:ed957780 r6:ee15a308 r5:00000000 > [ 133.597195] r4:ec112300 > [ 133.599717] [<c028c214>] (drm_atomic_helper_commit_planes) from [<c028e69c>] (drm_atomic_helper_commit+0x118/0x170) > [ 133.610128] r8:00000000 r7:ee272800 r6:00000000 r5:ec112300 r4:0000000b r3:00000000 > [ 133.617857] [<c028e584>] (drm_atomic_helper_commit) from [<c02b2788>] (exynos_atomic_commit+0x14/0x18) > [ 133.627141] r8:ee32c400 r7:00000000 r6:ee100200 r5:ee272800 r4:ec112300 r3:c02b2774 > [ 133.634869] [<c02b2774>] (exynos_atomic_commit) from [<c02af91c>] (drm_atomic_commit+0x4c/0x6c) > [ 133.643549] [<c02af8d0>] (drm_atomic_commit) from [<c028d24c>] (drm_atomic_helper_set_config+0x31c/0x428) > [ 133.653094] r5:ec112300 r4:00000003 > [ 133.656660] [<c028cf30>] (drm_atomic_helper_set_config) from [<c029f140>] (drm_mode_set_config_internal+0x60/0xdc) > [ 133.666982] r10:00000000 r9:ee272800 r8:ee100300 r7:ee32c400 r6:00000001 r5:00000028 > [ 133.674794] r4:00000000 > [ 133.677317] [<c029f0e0>] (drm_mode_set_config_internal) from [<c0290c28>] (drm_fb_helper_restore_fbdev_mode_unlocked+0xec/0x140) > [ 133.688856] r7:ee100200 r6:00000001 r5:00000028 r4:00000000 > [ 133.694501] [<c0290b3c>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c02b264c>] (exynos_drm_fbdev_restore_mode+0x28/0x2c) > [ 133.706042] r10:ee27294c r9:edbc4780 r8:ee272834 r7:ee272800 r6:ee272858 r5:c0749014 > [ 133.713854] r4:ee272800 > [ 133.716374] [<c02b2624>] (exynos_drm_fbdev_restore_mode) from [<c02b105c>] (exynos_drm_lastclose+0x10/0x14) > [ 133.726096] [<c02b104c>] (exynos_drm_lastclose) from [<c0294560>] (drm_lastclose+0x3c/0x10c) > [ 133.734514] [<c0294524>] (drm_lastclose) from [<c0294970>] (drm_release+0x340/0x4e0) > [ 133.742238] r6:ee272858 r5:edb4c8a8 r4:edb4c800 r3:00000000 > [ 133.747885] [<c0294630>] (drm_release) from [<c0103c14>] (__fput+0xa0/0x1e4) > [ 133.754910] r10:00000000 r9:00000008 r8:ee11b090 r7:edc0dc78 r6:ee182e10 r5:ee11b090 > [ 133.762722] r4:ec102300 > [ 133.765243] [<c0103b74>] (__fput) from [<c0103dc4>] (____fput+0x10/0x14) > [ 133.771923] r10:00000000 r9:ec166000 r8:c000fbc4 r7:ec2af8c0 r6:c0718ef8 r5:00000000 > [ 133.779735] r4:ec2afcc4 > [ 133.782258] [<c0103db4>] (____fput) from [<c0047310>] (task_work_run+0xb8/0xfc) > [ 133.789550] [<c0047258>] (task_work_run) from [<c0012e88>] (do_work_pending+0x88/0xa8) > [ 133.797442] r7:00000006 r6:ec167fb0 r5:c000fbc4 r4:ec166000 > [ 133.803088] [<c0012e00>] (do_work_pending) from [<c000fa64>] (work_pending+0xc/0x20) > [ 133.810809] r6:00000000 r5:00000001 r4:00000003 r3:00000000 > [ 133.816454] Code: e5927014 e5921018 e592301c e1d202be (e59590a4) > [ 133.822608] ---[ end trace 2dd031423862af07 ]--- -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |