Hi Kamil,
I've added some missing HDMI 2.0 commands:
On 04/23/2015 03:03 PM, Kamil Debski wrote:
> From: Hans Verkuil <hansverk@xxxxxxxxx>
>
> The added HDMI CEC framework provides a generic kernel interface for
> HDMI CEC devices.
>
> Signed-off-by: Hans Verkuil <hansverk@xxxxxxxxx>
> [k.debski@xxxxxxxxxxx: Merged CEC Updates commit by Hans Verkuil]
> [k.debski@xxxxxxxxxxx: Merged Update author commit by Hans Verkuil]
> [k.debski@xxxxxxxxxxx: change kthread handling when setting logical
> address]
> [k.debski@xxxxxxxxxxx: code cleanup and fixes]
> [k.debski@xxxxxxxxxxx: add missing CEC commands to match spec]
> [k.debski@xxxxxxxxxxx: add RC framework support]
> [k.debski@xxxxxxxxxxx: move and edit documentation]
> [k.debski@xxxxxxxxxxx: add vendor id reporting]
> [k.debski@xxxxxxxxxxx: add possibility to clear assigned logical
> addresses]
> [k.debski@xxxxxxxxxxx: documentation fixes, clenaup and expansion]
> [k.debski@xxxxxxxxxxx: reorder of API structs and add reserved fields]
> [k.debski@xxxxxxxxxxx: fix handling of events and fix 32/64bit timespec
> problem]
> [k.debski@xxxxxxxxxxx: add cec.h to include/uapi/linux/Kbuild]
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> ---
> Documentation/cec.txt | 396 ++++++++++++++++
> drivers/media/Kconfig | 6 +
> drivers/media/Makefile | 2 +
> drivers/media/cec.c | 1161 +++++++++++++++++++++++++++++++++++++++++++++
> include/media/cec.h | 140 ++++++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/cec.h | 303 ++++++++++++
> 7 files changed, 2009 insertions(+)
> create mode 100644 Documentation/cec.txt
> create mode 100644 drivers/media/cec.c
> create mode 100644 include/media/cec.h
> create mode 100644 include/uapi/linux/cec.h
>
> diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
> new file mode 100644
> index 0000000..bb6d66c
> --- /dev/null
> +++ b/include/uapi/linux/cec.h
> @@ -0,0 +1,303 @@
> +#ifndef _CEC_H
> +#define _CEC_H
> +
> +#include <linux/types.h>
> +
> +struct cec_time {
> + __u64 sec;
> + __u64 nsec;
> +};
> +
> +struct cec_msg {
> + struct cec_time ts;
> + __u32 len;
> + __u32 status;
> + __u32 timeout;
> + /* timeout (in ms) is used to timeout CEC_RECEIVE.
> + Set to 0 if you want to wait forever. */
> + __u8 msg[16];
> + __u8 reply;
> + /* If non-zero, then wait for a reply with this opcode.
> + If there was an error when sending the msg or FeatureAbort
> + was returned, then reply is set to 0.
> + If reply is non-zero upon return, then len/msg are set to
> + the received message.
> + If reply is zero upon return and status has the
> + CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to the
> + received feature abort message.
> + If reply is zero upon return and status has the
> + CEC_TX_STATUS_REPLY_TIMEOUT
> + bit set, then no reply was seen at all.
> + This field is ignored with CEC_RECEIVE.
> + If reply is non-zero for CEC_TRANSMIT and the message is a broadcast,
> + then -EINVAL is returned.
> + if reply is non-zero, then timeout is set to 1000 (the required
> + maximum response time).
> + */
> + __u8 reserved[31];
> +};
> +
> +static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
> +{
> + return msg->msg[0] >> 4;
> +}
> +
> +static inline __u8 cec_msg_destination(const struct cec_msg *msg)
> +{
> + return msg->msg[0] & 0xf;
> +}
> +
> +static inline bool cec_msg_is_broadcast(const struct cec_msg *msg)
> +{
> + return (msg->msg[0] & 0xf) == 0xf;
> +}
> +
> +/* cec status field */
> +#define CEC_TX_STATUS_OK (0)
> +#define CEC_TX_STATUS_ARB_LOST (1 << 0)
> +#define CEC_TX_STATUS_RETRY_TIMEOUT (1 << 1)
> +#define CEC_TX_STATUS_FEATURE_ABORT (1 << 2)
> +#define CEC_TX_STATUS_REPLY_TIMEOUT (1 << 3)
> +#define CEC_RX_STATUS_READY (0)
> +
> +#define CEC_LOG_ADDR_INVALID 0xff
> +
> +/* The maximum number of logical addresses one device can be assigned to.
> + * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
> + * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
> +#define CEC_MAX_LOG_ADDRS 4
> +
> +/* The "Primary Device Type" */
> +#define CEC_PRIM_DEVTYPE_TV 0
> +#define CEC_PRIM_DEVTYPE_RECORD 1
> +#define CEC_PRIM_DEVTYPE_TUNER 3
> +#define CEC_PRIM_DEVTYPE_PLAYBACK 4
> +#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM 5
> +#define CEC_PRIM_DEVTYPE_SWITCH 6
> +#define CEC_PRIM_DEVTYPE_VIDEOPROC 7
> +
> +/* The "All Device Types" flags (CEC 2.0) */
> +#define CEC_FL_ALL_DEVTYPE_TV (1 << 7)
> +#define CEC_FL_ALL_DEVTYPE_RECORD (1 << 6)
> +#define CEC_FL_ALL_DEVTYPE_TUNER (1 << 5)
> +#define CEC_FL_ALL_DEVTYPE_PLAYBACK (1 << 4)
> +#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM (1 << 3)
> +#define CEC_FL_ALL_DEVTYPE_SWITCH (1 << 2)
> +/* And if you wondering what happened to VIDEOPROC devices: those should
> + * be mapped to a SWITCH. */
> +
> +/* The logical address types that the CEC device wants to claim */
> +#define CEC_LOG_ADDR_TYPE_TV 0
> +#define CEC_LOG_ADDR_TYPE_RECORD 1
> +#define CEC_LOG_ADDR_TYPE_TUNER 2
> +#define CEC_LOG_ADDR_TYPE_PLAYBACK 3
> +#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4
> +#define CEC_LOG_ADDR_TYPE_SPECIFIC 5
> +#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6
> +/* Switches should use UNREGISTERED.
> + * Video processors should use SPECIFIC. */
> +
> +/* The CEC version */
> +#define CEC_VERSION_1_4B 5
> +#define CEC_VERSION_2_0 6
> +
> +struct cec_event {
> + struct cec_time ts;
> + __u32 event;
> + __u8 reserved[4];
> +};
> +
> +/* The CEC state */
> +#define CEC_STATE_DISABLED 0
> +#define CEC_STATE_ENABLED 1
> +
> +/* Userspace has to configure the adapter state (enable/disable) */
> +#define CEC_CAP_STATE (1 << 0)
> +/* Userspace has to configure the physical address */
> +#define CEC_CAP_PHYS_ADDR (1 << 1)
> +/* Userspace has to configure the logical addresses */
> +#define CEC_CAP_LOG_ADDRS (1 << 2)
> +/* Userspace can transmit messages */
> +#define CEC_CAP_TRANSMIT (1 << 3)
> +/* Userspace can receive messages */
> +#define CEC_CAP_RECEIVE (1 << 4)
> +/* Userspace has to configure the vendor id */
> +#define CEC_CAP_VENDOR_ID (1 << 5)
> +/* The hardware has the possibility to work in the promiscuous mode */
> +#define CEC_CAP_PROMISCUOUS (1 << 6)
> +
> +struct cec_caps {
> + __u32 available_log_addrs;
> + __u32 capabilities;
> + __u32 vendor_id;
> + __u8 version;
> + __u8 reserved[11];
> +};
> +
> +struct cec_log_addrs {
> + __u8 cec_version;
> + __u8 num_log_addrs;
> + __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
> + __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
> + __u8 log_addr[CEC_MAX_LOG_ADDRS];
> +
> + /* CEC 2.0 */
> + __u8 all_device_types;
> + __u8 features[CEC_MAX_LOG_ADDRS][12];
> +
> + __u8 reserved[9];
> +};
> +
> +/* Commands */
> +
> +/* One Touch Play Feature */
> +#define CEC_OP_ACTIVE_SOURCE 0x82
> +#define CEC_OP_IMAGE_VIEW_ON 0x04
> +#define CEC_OP_TEXT_VIEW_ON 0x0d
> +
> +/* Routing Control Feature */
> +#define CEC_OP_ACTIVE_SOURCE 0x82
> +#define CEC_OP_INACTIVE_SOURCE 0x9d
> +#define CEC_OP_REQUEST_ACTIVE_SOURCE 0x85
> +#define CEC_OP_ROUTING_CHANGE 0x80
> +#define CEC_OP_ROUTING_INFORMATION 0x81
> +#define CEC_OP_SET_STREAM_PATH 0x86
> +
> +/* Standby Feature */
> +#define CEC_OP_STANDBY 0x36
> +
> +/* One Touch Record Feature */
> +#define CEC_OP_RECORD_OFF 0x0b
> +#define CEC_OP_RECORD_ON 0x09
> +#define CEC_OP_RECORD_STATUS 0x0a
> +#define CEC_OP_RECORD_TV_SCREEN 0x0f
> +
> +/* Timer Programming Feature */
> +#define CEC_OP_CLEAR_ANALOGUE_TIMER 0x33
> +#define CEC_OP_CLEAR_DIGITAL_TIMER 0x99
> +#define CEC_OP_CLEAR_EXT_TIMER 0xa1
> +#define CEC_OP_SET_ANALOGUE_TIMER 0x34
> +#define CEC_OP_SET_DIGITAL_TIMER 0x97
> +#define CEC_OP_SET_EXT_TIMER 0xa2
> +#define CEC_OP_SET_EXT_PROGRAM_TIMER 0x67
> +#define CEC_OP_TIMER_CLEARED_STATUS 0x43
> +#define CEC_OP_TIMER_STATUS 0x35
> +
> +/* System Information Feature */
> +#define CEC_OP_CEC_VERSION 0x9e
> +#define CEC_OP_GET_CEC_VERSION 0x9f
> +#define CEC_OP_GIVE_PHYSICAL_ADDR 0x83
> +#define CEC_OP_GET_MENU_LANGUAGE 0x91
> +#define CEC_OP_REPORT_PHYSICAL_ADDR 0x84
> +#define CEC_OP_SET_MENU_LANGUAGE 0x32
#define CEC_OP_REPORT_FEATURES 0xa6 /* HDMI 2.0 */
#define CEC_OP_GIVE_FEATURES 0xa5 /* HDMI 2.0 */
> +
> +/* Deck Control Feature */
> +#define CEC_OP_DECK_CONTROL 0x42
> +#define CEC_OP_DECK_STATUS 0x1b
> +#define CEC_OP_GIVE_DECK_STATUS 0x1a
> +#define CEC_OP_PLAY 0x41
> +
> +/* Tuner Control Feature */
> +#define CEC_OP_GIVE_TUNER_DEVICE_STATUS 0x08
> +#define CEC_OP_SELECT_ANALOGUE_SERVICE 0x92
> +#define CEC_OP_SELECT_DIGITAL_SERVICE 0x93
> +#define CEC_OP_TUNER_DEVICE_STATUS 0x07
> +#define CEC_OP_TUNER_STEP_DECREMENT 0x06
> +#define CEC_OP_TUNER_STEP_INCREMENT 0x05
> +
> +/* Vendor Specific Commands Feature */
> +#define CEC_OP_CEC_VERSION 0x9e
> +#define CEC_OP_DEVICE_VENDOR_ID 0x87
> +#define CEC_OP_GET_CEC_VERSION 0x9f
> +#define CEC_OP_GIVE_DEVICE_VENDOR_ID 0x8c
> +#define CEC_OP_VENDOR_COMMAND 0x89
> +#define CEC_OP_VENDOR_COMMAND_WITH_ID 0xa0
> +#define CEC_OP_VENDOR_REMOTE_BUTTON_DOWN 0x8a
> +#define CEC_OP_VENDOR_REMOTE_BUTTON_UP 0x8b
> +
> +/* OSD Display Feature */
> +#define CEC_OP_SET_OSD_STRING 0x64
> +
> +/* Device OSD Transfer Feature */
> +#define CEC_OP_GIVE_OSD_NAME 0x46
> +#define CEC_OP_SET_OSD_NAME 0x47
> +
> +/* Device Menu Control Feature */
> +#define CEC_OP_MENU_REQUEST 0x8d
> +#define CEC_OP_MENU_STATUS 0x8e
> +#define CEC_OP_USER_CONTROL_PRESSED 0x44
> +#define CEC_OP_USER_CONTROL_RELEASED 0x45
> +
> +/* Power Status Feature */
> +#define CEC_OP_GIVE_DEVICE_POWER_STATUS 0x8f
> +#define CEC_OP_REPORT_POWER_STATUS 0x90
> +#define CEC_OP_FEATURE_ABORT 0x00
> +#define CEC_OP_ABORT 0xff
> +
> +/* System Audio Control Feature */
> +#define CEC_OP_GIVE_AUDIO_STATUS 0x71
> +#define CEC_OP_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d
> +#define CEC_OP_REPORT_AUDIO_STATUS 0x7a
> +#define CEC_OP_SET_SYSTEM_AUDIO_MODE 0x72
> +#define CEC_OP_SYSTEM_AUDIO_MODE_REQUEST 0x70
> +#define CEC_OP_SYSTEM_AUDIO_MODE_STATUS 0x7e
> +
> +/* Audio Rate Control Feature */
> +#define CEC_OP_SET_AUDIO_RATE 0x9a
> +
/* Audio Return Channel Control Feature */
#define CEC_OP_INITIATE_ARC 0xc0
#define CEC_OP_REPORT_ARC_INITIATED 0xc1
#define CEC_OP_REPORT_ARC_TERMINATED 0xc2
#define CEC_OP_REQUEST_ARC_INITIATION 0xc3
#define CEC_OP_REQUEST_ARC_TERMINATION 0xc4
#define CEC_OP_TERMINATE_ARC 0xc5
/* Dynamic Audio Lipsync Feature, HDMI 2.0 */
#define CEC_OP_REQUEST_CURRENT_LATENCY 0xa7
#define CEC_OP_REPORT_CURRENT_LATENCY 0xa8
/* Capability Discovery and Control Feature */
#define CEC_OP_CDC_MESSAGE 0xf8
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
