Re: [PATCH v4 06/10] cec: add HDMI CEC framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kamil, Hans,

I'm the main developer of libCEC (https://github.com/Pulse-Eight/libcec). Sorry for the late time to jump in here, but I wasn't signed up to this mailing list and someone pointed me to this discussion.

Unfortunately this approach will not work with half the TVs that are out there. I'll explain why:

* because of how some (common) brands implemented CEC in their TVs, this implementation will not work, as the TV will just reject it. In libCEC, we've created work arounds for brands like this. Without these work arounds, your in-kernel implementation will be very vendor specific. e.g. this implementation will work for Samsung's TVs, but not for the TVs made by another big TV brand. All commands, including CEC_OP_ABORT, should be passed to userspace to make it work with all brands.

* it should be made possible to not have the kernel send any CEC message, try to process any received CEC message, or ack to any logical address at all, to allow libraries like libCEC to fully handle all CEC traffic. Some brands only enable routing of some CEC keys when a specific device type is used. libCEC will allocate a logical address of the correct type for the brand that's used. If another address is first allocated by the kernel, and the TV communicates with it to find out it's name and things like that, and libCEC allocates another address a bit later when initialised, then you'll end up with multiple entries in the device list on the TV, and only one of them will work.

* CEC is *very* vendor specific. The main reason is, in my opinion, the use of the word "should" instead of "shall" in the spec. It's addressed in the new version, but it'll take years before all the non 2.x devices are gone. What works for vendor A will simply not work for vendor B. libCEC aims to address this, in a library that can be used on all major platforms and by all major programming languages. You could duplicate the work done there in the kernel to make make the implementation work with all brands, but I think that this does simply not belong in the kernel when it can be handled in userspace perfectly.

So I suggest that you limit the in-kernel implementation to handling raw traffic only, to have it do this (and nothing more): * allocate one or more logical addresses, and ack CEC traffic sent to those logical addresses * receive CEC traffic and forward it to userspace (traffic sent to all addresses is preferred, not just traffic sent to the logical address used by the device running this code)
* transmit CEC traffic initiated by userspace

thanks,

Lars Op den Kamp


On 23-04-15 15:03, Kamil Debski wrote:
From: Hans Verkuil <hansverk@xxxxxxxxx>

The added HDMI CEC framework provides a generic kernel interface for
HDMI CEC devices.

Signed-off-by: Hans Verkuil <hansverk@xxxxxxxxx>
[k.debski@xxxxxxxxxxx: Merged CEC Updates commit by Hans Verkuil]
[k.debski@xxxxxxxxxxx: Merged Update author commit by Hans Verkuil]
[k.debski@xxxxxxxxxxx: change kthread handling when setting logical
address]
[k.debski@xxxxxxxxxxx: code cleanup and fixes]
[k.debski@xxxxxxxxxxx: add missing CEC commands to match spec]
[k.debski@xxxxxxxxxxx: add RC framework support]
[k.debski@xxxxxxxxxxx: move and edit documentation]
[k.debski@xxxxxxxxxxx: add vendor id reporting]
[k.debski@xxxxxxxxxxx: add possibility to clear assigned logical
addresses]
[k.debski@xxxxxxxxxxx: documentation fixes, clenaup and expansion]
[k.debski@xxxxxxxxxxx: reorder of API structs and add reserved fields]
[k.debski@xxxxxxxxxxx: fix handling of events and fix 32/64bit timespec
problem]
[k.debski@xxxxxxxxxxx: add cec.h to include/uapi/linux/Kbuild]
Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
---
  Documentation/cec.txt     |  396 ++++++++++++++++
  drivers/media/Kconfig     |    6 +
  drivers/media/Makefile    |    2 +
  drivers/media/cec.c       | 1161 +++++++++++++++++++++++++++++++++++++++++++++
  include/media/cec.h       |  140 ++++++
  include/uapi/linux/Kbuild |    1 +
  include/uapi/linux/cec.h  |  303 ++++++++++++
  7 files changed, 2009 insertions(+)
  create mode 100644 Documentation/cec.txt
  create mode 100644 drivers/media/cec.c
  create mode 100644 include/media/cec.h
  create mode 100644 include/uapi/linux/cec.h

diff --git a/Documentation/cec.txt b/Documentation/cec.txt
new file mode 100644
index 0000000..2b6c08a
--- /dev/null
+++ b/Documentation/cec.txt
@@ -0,0 +1,396 @@
+CEC Kernel Support
+==================
+
+The CEC framework provides a unified kernel interface for use with HDMI CEC
+hardware. It is designed to handle a multiple variants of hardware. Adding to
+the flexibility of the framework it enables to set which parts of the CEC
+protocol processing is handled by the hardware, by the driver and by the
+userspace application.
+
+
+The CEC Protocol
+----------------
+
+The CEC protocol enables consumer electronic devices to communicate with each
+other through the HDMI connection. The protocol uses logical addresses in the
+communication. The logical address is strictly connected with the functionality
+provided by the device. The TV acting as the communication hub is always
+assigned address 0. The physical address is determined by the physical
+connection between devices.
+
+The protocol enables control of compatible devices with a single remote.
+Synchronous power on/standby, instant playback with changing the content source
+on the TV.
+
+The Kernel Interface
+====================
+
+CEC Adapter
+-----------
+
+#define CEC_LOG_ADDR_INVALID 0xff
+
+/* The maximum number of logical addresses one device can be assigned to.
+ * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
+ * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
+#define CEC_MAX_LOG_ADDRS 4
+
+/* The "Primary Device Type" */
+#define CEC_PRIM_DEVTYPE_TV		0
+#define CEC_PRIM_DEVTYPE_RECORD		1
+#define CEC_PRIM_DEVTYPE_TUNER		3
+#define CEC_PRIM_DEVTYPE_PLAYBACK	4
+#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM	5
+#define CEC_PRIM_DEVTYPE_SWITCH		6
+#define CEC_PRIM_DEVTYPE_VIDEOPROC	7
+
+/* The "All Device Types" flags (CEC 2.0) */
+#define CEC_FL_ALL_DEVTYPE_TV		(1 << 7)
+#define CEC_FL_ALL_DEVTYPE_RECORD	(1 << 6)
+#define CEC_FL_ALL_DEVTYPE_TUNER	(1 << 5)
+#define CEC_FL_ALL_DEVTYPE_PLAYBACK	(1 << 4)
+#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM	(1 << 3)
+#define CEC_FL_ALL_DEVTYPE_SWITCH	(1 << 2)
+/* And if you wondering what happened to VIDEOPROC devices: those should
+ * be mapped to a SWITCH. */
+
+/* The logical address types that the CEC device wants to claim */
+#define CEC_LOG_ADDR_TYPE_TV		0
+#define CEC_LOG_ADDR_TYPE_RECORD	1
+#define CEC_LOG_ADDR_TYPE_TUNER		2
+#define CEC_LOG_ADDR_TYPE_PLAYBACK	3
+#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM	4
+#define CEC_LOG_ADDR_TYPE_SPECIFIC	5
+#define CEC_LOG_ADDR_TYPE_UNREGISTERED	6
+/* Switches should use UNREGISTERED.
+ * Video processors should use SPECIFIC. */
+
+/* The CEC version */
+#define CEC_VERSION_1_4B		5
+#define CEC_VERSION_2_0			6
+
+struct cec_adapter {
+	/* internal fields removed */
+
+	u16 phys_addr;
+	u32 capabilities;
+	u8 version;
+	u8 num_log_addrs;
+	u8 prim_device[CEC_MAX_LOG_ADDRS];
+	u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	u8 log_addr[CEC_MAX_LOG_ADDRS];
+
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+	int (*adap_transmit)(struct cec_adapter *adap, struct cec_msg *msg);
+	void (*adap_transmit_timed_out)(struct cec_adapter *adap);
+
+	void (*claimed_log_addr)(struct cec_adapter *adap, u8 idx);
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+};
+
+int cec_create_adapter(struct cec_adapter *adap, u32 caps);
+void cec_delete_adapter(struct cec_adapter *adap);
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data, bool block);
+
+/* Called by the adapter */
+void cec_transmit_done(struct cec_adapter *adap, u32 status);
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
+
+int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, bool block);
+int cec_claim_log_addrs(struct cec_adapter *adap, struct cec_log_addrs *log_addrs, bool block);
+
+The device type defines are defined by the CEC standard.
+
+The cec_adapter structure represents the adapter. It has a number of
+operations that have to be implemented in the driver: adap_enable() enables
+or disables the physical adapter, adap_log_addr() tells the driver which
+logical address should be configured. This may be called multiple times
+to configure multiple logical addresses. Calling adap_enable(false) or
+adap_log_addr(CEC_LOG_ADDR_INVALID) will clear all configured logical
+addresses.
+
+The adap_transmit op will setup the hardware to send out the given CEC message.
+This will return without waiting for the transmission to finish. The
+adap_transmit_timed_out() function is called when the current transmission timed
+out and the hardware needs to be informed of this (the hardware should go back
+from transmitter to receiver mode).
+
+The adapter driver will also call into the adapter: it should call
+cec_transmit_done() when a cec transfer was finalized and cec_received_msg()
+when a new message was received.
+
+When a message is received the received() op is called.
+
+The driver has to call cec_create_adapter to initialize the structure. If
+the 'caps' argument is non-zero, then it will also create a /dev/cecX
+device node to allow userspace to interact with the CEC device. Userspace
+can request those capabilities with the CEC_G_CAPS ioctl.
+
+In order for a CEC adapter to be configured it needs a physical address.
+This is normally assigned by the driver. It is either 0.0.0.0 for a TV (aka
+video receiver) or it is derived from the EDID that the source received
+from the sink. This is normally set by the driver before enabling the CEC
+adapter, or it is set from userspace in the case of CEC USB dongles (although
+embedded systems might also want to set this manually).
+
+After enabling the CEC adapter it has to be configured.
+
+The userspace has to inform the CEC adapter of which type of device it requests
+the adapter to identify itself. After this information is set by userspace, the
+CEC framework will attempt to to find and claim a logical addresses matching the
+requested device type. If none are found, then it will fall back to logical
+address Unregistered (15). To clear the logical addresses list from the list the
+userspace application should set the num_log_addrs field of struct cec_log_addr
+to 0.
+
+The type of device is set from the userspace with the CEC_S_ADAP_LOG_ADDRS. In
+addition, claiming logical addresses can be initiated from the kernel side by
+calling the cec_claim_log_addrs function.
+
+Before the addresses are claimed it is possible to send and receive messages.
+Sending all messages is possible as it is up to the userspace to the source
+and destination addresses in the message payload. However, only broadcast
+messages can be received until a regular logical address is claimed.
+
+When a CEC message is received the CEC framework will take care of the CEC
+core messages CEC_OP_GET_CEC_VERSION, CEC_OP_GIVE_PHYS_ADDR and CEC_OP_ABORT.
+Then it will call the received() op (if set), and finally it will queue it
+for handling by userspace if create_devnode was true, or send back
+FEATURE_ABORT if create_devnode was false.
+
+Drivers can also use the cec_transmit_msg() call to transmit a message. This
+can either be fire-and-forget (the CEC framework will queue up messages in a
+transmit queue), or a blocking wait until there is either an error or a
+reply to the message.
+
+
+The Userspace API
+=================
+
+ioctl API
+---------
+
+- CEC_G_CAPS ioctl
+
+Read the CEC adapter capabilities: the number of logical addresses
+that the adapter can configure and what can be controlled from userspace.
+
+#define CEC_G_CAPS			_IOR('a', 0, struct cec_caps)
+
+The cec_caps struct is following:
+
+struct cec_caps {
+	__u32 available_log_addrs;
+	__u32 capabilities;
+	__u32 vendor_id;
+	__u8  version;
+	__u8  reserved[11];
+};
+
+The following capabilities are defined:
+
+/* Userspace has to configure the adapter state (enable/disable) */
+#define CEC_CAP_STATE		(1 << 0)
+/* Userspace has to configure the physical address */
+#define CEC_CAP_PHYS_ADDR	(1 << 1)
+/* Userspace has to configure the logical addresses */
+#define CEC_CAP_LOG_ADDRS	(1 << 2)
+/* Userspace can transmit messages */
+#define CEC_CAP_TRANSMIT	(1 << 3)
+/* Userspace can receive messages */
+#define CEC_CAP_RECEIVE		(1 << 4)
+/* Userspace has to configure the vendor id */
+#define CEC_CAP_VENDOR_ID	(1 << 5)
+/* The hardware has the possibility to work in the promiscuous mode */
+#define CEC_CAP_PROMISCUOUS	(1 << 6)
+
+- CEC_TRANSMIT and CEC_RECEIVE ioctls
+
+These ioctls are used to send and receive messages over the CEC bus.
+
+#define CEC_TRANSMIT		_IOWR('a', 1, struct cec_msg)
+#define CEC_RECEIVE		_IOWR('a', 2, struct cec_msg)
+
+The struct cec_msg is the main message struct:
+
+struct cec_msg {
+	__u32 len;
+	__u32 status;
+	__u32 timeout;
+	/* timeout (in ms) is used to timeout CEC_RECEIVE.
+	   Set to 0 if you want to wait forever. */
+	struct cec_time ts;
+	__u8  msg[16];
+	__u8  reply;
+	/* If non-zero, then wait for a reply with this opcode.
+	   If there was an error when sending the msg or FeatureAbort
+	   was returned, then reply is set to 0.
+	   If reply is non-zero upon return, then len/msg are set to
+	   the received message.
+	   If reply is zero upon return and status has the
+	   CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to the
+	   received feature abort message.  If reply is zero upon return and
+	   status has the CEC_TX_STATUS_REPLY_TIMEOUT bit set, then no reply
+	   was seen at all.  This field is ignored with CEC_RECEIVE.
+	   If reply is non-zero for CEC_TRANSMIT and the message is a broadcast,
+	   then -EINVAL is returned.
+	   if reply is non-zero, then timeout is set to 1000 (the required
+	   maximum response time).
+	 */
+	__u8 reserved[31];
+};
+
+The struct contains 16 bytes for the message, the length of the message, a
+status value in case of errors. Optionally you can request the CEC framework to
+wait after transmitting the message until the 'reply' message is returned (or
+Feature Abort). This is done asynchronously, i.e. it does not require that the
+reply comes right after the transmit, but other messages in between are allowed.
+
+The ts field of the struct cec_msg represents a timestamp. The timestamp struct
+is following:
+
+struct cec_time {
+	__u64 sec;
+	__u64 nsec;
+};
+
+With CEC_TRANSMIT you can transmit a message, either blocking or
+non-blocking. With CEC_RECEIVE you can dequeue a pending received
+message from the internal queue or wait for a message to arrive
+(if called in blocking mode).
+
+- CEC_G_ADAP_LOG_ADDRS and CEC_S_ADAP_LOG_ADDRS
+
+These ioctl are used to configure the logical addresses of the CEC adapter.
+
+#define CEC_G_ADAP_LOG_ADDRS	_IOR('a', 3, struct cec_log_addrs)
+#define CEC_S_ADAP_LOG_ADDRS	_IOWR('a', 4, struct cec_log_addrs)
+
+The struct cec_log_addrs is following:
+
+struct cec_log_addrs {
+	__u8 cec_version;
+	__u8 num_log_addrs;
+	__u8 primary_device_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr[CEC_MAX_LOG_ADDRS];
+
+	/* CEC 2.0 */
+	__u8 all_device_types;
+	__u8 features[CEC_MAX_LOG_ADDRS][12];
+
+	__u8 reserved[9];
+};
+
+The cec_version determines which CEC version should be used.
+
+/* The CEC version */
+#define CEC_VERSION_1_4B		5
+#define CEC_VERSION_2_0			6
+
+It will try to claim num_log_addrs devices. The log_addr_type array has
+the logical address type that needs to be claimed for that device, and
+the log_addr array will receive the actual logical address that was
+claimed for that device or 0xff if no address could be claimed.
+
+The primary_device_type contains the primary device for each logical
+address.
+
+For CEC 2.0 devices fill in the all_device_types parameter to use with the
+Report Features command, and fill in the 'features' which contains the
+remaining parameters (RC Profile and Device Features) to use in Report
+Features.
+
+An error is returned if the adapter is disabled or if there
+is no physical address assigned or if the cec_version is unknown.
+
+If no logical address of one or more of the given types could be claimed,
+then log_addr will be set to CEC_LOG_ADDR_INVALID.
+
+If no logical address could be claimed at all, then num_log_addrs will
+be set to 1, log_addr_type[0] to UNREGISTERED and log_addr[0] to 0xf.
+
+The S_ADAP_LOG_ADDRS ioctl is not available unless CEC_CAP_LOG_ADDRS
+is set.
+
+- CEC_G_ADAP_STATE and CEC_S_ADAP_STATE ioctls
+
+Enable/disable the adapter. The S_ADAP_STATE ioctl is not available
+unless CEC_CAP_STATE is set.
+
+#define CEC_G_ADAP_STATE	_IOR('a', 5, __u32)
+#define CEC_S_ADAP_STATE	_IOW('a', 6, __u32)
+
+State CEC_STATE_DISABLED means the adapter is disabled, CEC_STATE_ENABLED
+stands for adapter enabled.
+
+/* The CEC state */
+#define CEC_STATE_DISABLED		0
+#define CEC_STATE_ENABLED		1
+
+- CEC_G_ADAP_PHYS_ADDR and CEC_S_ADAP_PHYS_ADDR ioctls
+
+phys_addr is either 0 (if this is the CEC root device) or a valid physical
+address obtained from the EDID of the sink as read by this CEC device (if this
+is a source device) or a physical address obtained and modified from
+the EDID of the sink and used for a sink CEC device.  If nothing is connected,
+then phys_addr is 0xffff.  See HDMI 1.4b, section 8.7 (Physical Address).
+
+#define CEC_G_ADAP_PHYS_ADDR	_IOR('a', 7, __u16)
+#define CEC_S_ADAP_PHYS_ADDR	_IOW('a', 8, __u16)
+
+The S_ADAP_PHYS_ADDR ioctl is not available unless CEC_CAP_PHYS_ADDR
+is set.
+
+- CEC_G_EVENT ioctl
+
+This ioctl is used to read a pending event. It takes a struct cec_event
+that is filled with appropriate data.
+
+The struct cec_event is following:
+
+struct cec_event {
+	struct cec_time ts;
+	__u32 event;
+	__u32 reserved[4];
+};
+
+- CEC_G_VENDOR_ID and CEC_S_VENDOR_ID ioctls
+
+These calls are used to read or set the vendor ID of the adapter.
+
+#define CEC_G_VENDOR_ID		_IOR('a', 9, __u32)
+#define CEC_S_VENDOR_ID		_IOW('a', 10, __u32)
+
+Vendor ID is a 24 bit identifier obtained from the IEEE Registration
+Authority Committee.
+
+The CEC_S_ADAP_VENDOR_ID ioctl is not available unless CEC_CAP_VENDOR_ID
+is set.
+
+Events
+------
+
+The CEC framework provides a way for the userspace to be informed about
+a number of event that can occur in the hardware.
+
+The userspace is informed about a new event with the POLLPRI event of the
+poll function.
+
+The list of events is following:
+
+/* Event that occurs when a cable is connected */
+#define CEC_EVENT_CONNECT	1
+/* Event that occurs when all logical addresses were claimed */
+#define CEC_EVENT_READY		2
+/* Event that is sent when the cable is disconnected */
+#define CEC_EVENT_DISCONNECT	3
+
+The events can be read with the CEC_G_EVENT ioctl.
+
+Remote control handling
+-----------------------
+
+The CEC framework handles the key up/down messages of remote control and
+provides the key events via the RC framework.
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 3ef0f90..262e9ad 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -15,6 +15,12 @@ if MEDIA_SUPPORT

  comment "Multimedia core support"

+config CEC
+	tristate "CEC API (EXPERIMENTAL)"
+	select RC_CORE
+	---help---
+	  Enable the CEC API.
+
  #
  # Multimedia support - automatically enable V4L2 and DVB core
  #
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index e608bbc..db66014 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,6 +2,8 @@
  # Makefile for the kernel multimedia device drivers.
  #

+obj-$(CONFIG_CEC) += cec.o
+
  media-objs	:= media-device.o media-devnode.o media-entity.o

  #
diff --git a/drivers/media/cec.c b/drivers/media/cec.c
new file mode 100644
index 0000000..bf5cc07
--- /dev/null
+++ b/drivers/media/cec.c
@@ -0,0 +1,1161 @@
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <media/cec.h>
+
+#define CEC_NUM_DEVICES	256
+#define CEC_NAME	"cec"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-1)");
+
+struct cec_transmit_notifier {
+	struct completion c;
+	struct cec_data *data;
+};
+
+#define dprintk(fmt, arg...)						\
+	do {								\
+		if (debug)						\
+			pr_info("cec-%s: " fmt, adap->name, ## arg);	\
+	} while (0)
+
+static dev_t cec_dev_t;
+
+/* Active devices */
+static DEFINE_MUTEX(cec_devnode_lock);
+static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES);
+
+/* dev to cec_devnode */
+#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev)
+
+static inline struct cec_devnode *cec_devnode_data(struct file *filp)
+{
+	return filp->private_data;
+}
+
+static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i;
+
+	for (i = 0; i < adap->num_log_addrs; i++)
+		if (adap->log_addr[i] == log_addr)
+			return i;
+	return -1;
+}
+
+static unsigned cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i = cec_log_addr2idx(adap, log_addr);
+
+	return adap->prim_device[i < 0 ? 0 : i];
+}
+
+/* Called when the last user of the cec device exits. */
+static void cec_devnode_release(struct device *cd)
+{
+	struct cec_devnode *cecdev = to_cec_devnode(cd);
+
+	mutex_lock(&cec_devnode_lock);
+
+	/* Delete the cdev on this minor as well */
+	cdev_del(&cecdev->cdev);
+
+	/* Mark device node number as free */
+	clear_bit(cecdev->minor, cec_devnode_nums);
+
+	mutex_unlock(&cec_devnode_lock);
+
+	/* Release cec_devnode and perform other cleanups as needed. */
+	if (cecdev->release)
+		cecdev->release(cecdev);
+}
+
+static struct bus_type cec_bus_type = {
+	.name = CEC_NAME,
+};
+
+static bool cec_sleep(struct cec_adapter *adap, int timeout)
+{
+	bool timed_out = false;
+
+	DECLARE_WAITQUEUE(wait, current);
+
+	add_wait_queue(&adap->kthread_waitq, &wait);
+	if (!kthread_should_stop()) {
+		if (timeout < 0) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule();
+		} else {
+			timed_out = !schedule_timeout_interruptible
+				(msecs_to_jiffies(timeout));
+		}
+	}
+
+	remove_wait_queue(&adap->kthread_waitq, &wait);
+	return timed_out;
+}
+
+/*
+ * Main CEC state machine
+ *
+ * In the IDLE state the CEC adapter is ready to receive or transmit messages.
+ * If it is woken up it will check if a new message is queued, and if so it
+ * will be transmitted and the state will go to TRANSMITTING.
+ *
+ * When the transmit is marked as done the state machine will check if it
+ * should wait for a reply. If not, it will call the notifier and go back
+ * to the IDLE state. Else it will switch to the WAIT state and wait for a
+ * reply. When the reply arrives it will call the notifier and go back
+ * to IDLE state.
+ *
+ * For the transmit and the wait-for-reply states a timeout is used of
+ * 1 second as per the standard.
+ */
+static int cec_thread_func(void *data)
+{
+	struct cec_adapter *adap = data;
+	int timeout = -1;
+
+	for (;;) {
+		bool timed_out = cec_sleep(adap, timeout);
+
+		if (kthread_should_stop())
+			break;
+		timeout = -1;
+		mutex_lock(&adap->lock);
+		dprintk("state %d timedout: %d tx: %d@%d\n", adap->state,
+			timed_out, adap->tx_qcount, adap->tx_qstart);
+		if (adap->state == CEC_ADAP_STATE_TRANSMITTING && timed_out)
+			adap->adap_transmit_timed_out(adap);
+
+		if (adap->state == CEC_ADAP_STATE_WAIT ||
+		    adap->state == CEC_ADAP_STATE_TRANSMITTING) {
+			struct cec_data *data = adap->tx_queue +
+						adap->tx_qstart;
+
+			if (adap->state == CEC_ADAP_STATE_TRANSMITTING &&
+			    data->msg.reply && !timed_out &&
+			    data->msg.status == CEC_TX_STATUS_OK) {
+				adap->state = CEC_ADAP_STATE_WAIT;
+				timeout = 1000;
+			} else {
+				if (timed_out) {
+					data->msg.reply = 0;
+					if (adap->state ==
+					    CEC_ADAP_STATE_TRANSMITTING)
+						data->msg.status =
+						    CEC_TX_STATUS_RETRY_TIMEOUT;
+					else
+						data->msg.status =
+						    CEC_TX_STATUS_REPLY_TIMEOUT;
+				}
+				adap->state = CEC_ADAP_STATE_IDLE;
+				if (data->func) {
+					mutex_unlock(&adap->lock);
+					data->func(adap, data, data->priv);
+					mutex_lock(&adap->lock);
+				}
+				adap->tx_qstart = (adap->tx_qstart + 1) %
+						  CEC_TX_QUEUE_SZ;
+				adap->tx_qcount--;
+				wake_up_interruptible(&adap->waitq);
+			}
+		}
+		if (adap->state == CEC_ADAP_STATE_IDLE && adap->tx_qcount) {
+			adap->state = CEC_ADAP_STATE_TRANSMITTING;
+			timeout = adap->tx_queue[adap->tx_qstart].msg.len == 1 ?
+				  200 : 1000;
+			adap->adap_transmit(adap,
+					  &adap->tx_queue[adap->tx_qstart].msg);
+			mutex_unlock(&adap->lock);
+			continue;
+		}
+		mutex_unlock(&adap->lock);
+	}
+	return 0;
+}
+
+static int cec_transmit_notify(struct cec_adapter *adap, struct cec_data *data,
+		void *priv)
+{
+	struct cec_transmit_notifier *n = priv;
+
+	*(n->data) = *data;
+	complete(&n->c);
+	return 0;
+}
+
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data,
+		     bool block)
+{
+	struct cec_transmit_notifier notifier;
+	struct cec_msg *msg = &data->msg;
+	int res = 0;
+	unsigned idx;
+
+	if (msg->len == 0 || msg->len > 16)
+		return -EINVAL;
+	if (msg->reply && (msg->len == 1 || cec_msg_is_broadcast(msg)))
+		return -EINVAL;
+	if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
+	    cec_msg_initiator(msg) == cec_msg_destination(msg))
+		return -EINVAL;
+	if (cec_msg_initiator(msg) != 0xf &&
+	    cec_log_addr2idx(adap, cec_msg_initiator(msg)) < 0)
+		return -EINVAL;
+
+	if (msg->len == 1)
+		dprintk("cec_transmit_msg: 0x%02x%s\n",
+				msg->msg[0], !block ? " nb" : "");
+	else if (msg->reply)
+		dprintk("cec_transmit_msg: 0x%02x 0x%02x (wait for 0x%02x)%s\n",
+				msg->msg[0], msg->msg[1],
+				msg->reply, !block ? " nb" : "");
+	else
+		dprintk("cec_transmit_msg: 0x%02x 0x%02x%s\n",
+				msg->msg[0], msg->msg[1],
+				!block ? " nb" : "");
+
+	msg->status = 0;
+	memset(&msg->ts, 0, sizeof(msg->ts));
+	if (msg->reply)
+		msg->timeout = 1000;
+	if (block) {
+		init_completion(&notifier.c);
+		notifier.data = data;
+		data->func = cec_transmit_notify;
+		data->priv = &notifier;
+	} else {
+		data->func = NULL;
+		data->priv = NULL;
+	}
+	mutex_lock(&adap->lock);
+	idx = (adap->tx_qstart + adap->tx_qcount) % CEC_TX_QUEUE_SZ;
+	if (adap->tx_qcount == CEC_TX_QUEUE_SZ) {
+		res = -EBUSY;
+	} else {
+		adap->tx_queue[idx] = *data;
+		adap->tx_qcount++;
+		if (adap->state == CEC_ADAP_STATE_IDLE)
+			wake_up_interruptible(&adap->kthread_waitq);
+	}
+	mutex_unlock(&adap->lock);
+	if (res || !block)
+		return res;
+	wait_for_completion_interruptible(&notifier.c);
+	return res;
+}
+EXPORT_SYMBOL_GPL(cec_transmit_msg);
+
+void cec_transmit_done(struct cec_adapter *adap, u32 status)
+{
+	struct cec_msg *msg;
+	struct timespec64 ts;
+
+	dprintk("cec_transmit_done\n");
+	mutex_lock(&adap->lock);
+	if (adap->state == CEC_ADAP_STATE_TRANSMITTING) {
+		msg = &adap->tx_queue[adap->tx_qstart].msg;
+		msg->status = status;
+		if (status)
+			msg->reply = 0;
+		ktime_get_ts64(&ts);
+		msg->ts.sec = ts.tv_sec;
+		msg->ts.nsec = ts.tv_nsec;
+		wake_up_interruptible(&adap->kthread_waitq);
+	}
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_transmit_done);
+
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	bool is_broadcast = cec_msg_is_broadcast(msg);
+	u8 dest_laddr = cec_msg_destination(msg);
+	u8 devtype = cec_log_addr2dev(adap, dest_laddr);
+	bool is_directed = cec_log_addr2idx(adap, dest_laddr) >= 0;
+	struct cec_data tx_data;
+	int res = 0;
+	unsigned idx;
+
+	if (msg->len <= 1)
+		return 0;
+	if (!is_directed && !is_broadcast)
+		return 0;	/* Not for us */
+
+	tx_data.msg.msg[0] = (msg->msg[0] << 4) | (msg->msg[0] >> 4);
+	tx_data.msg.reply = 0;
+
+	if (adap->received) {
+		res = adap->received(adap, msg);
+		if (res != -ENOMSG)
+			return 0;
+		res = 0;
+	}
+
+	switch (msg->msg[1]) {
+	case CEC_OP_GET_CEC_VERSION:
+		if (is_broadcast)
+			return 0;
+		tx_data.msg.len = 3;
+		tx_data.msg.msg[1] = CEC_OP_CEC_VERSION;
+		tx_data.msg.msg[2] = adap->version;
+		return cec_transmit_msg(adap, &tx_data, false);
+
+	case CEC_OP_GIVE_PHYSICAL_ADDR:
+		if (!is_directed)
+			return 0;
+		/* Do nothing for CEC switches using addr 15 */
+		if (devtype == CEC_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
+			return 0;
+		tx_data.msg.len = 5;
+		tx_data.msg.msg[1] = CEC_OP_REPORT_PHYSICAL_ADDR;
+		tx_data.msg.msg[2] = adap->phys_addr >> 8;
+		tx_data.msg.msg[3] = adap->phys_addr & 0xff;
+		tx_data.msg.msg[4] = devtype;
+		return cec_transmit_msg(adap, &tx_data, false);
+
+	case CEC_OP_ABORT:
+		/* Do nothing for CEC switches */
+		if (devtype == CEC_PRIM_DEVTYPE_SWITCH)
+			return 0;
+		tx_data.msg.len = 4;
+		tx_data.msg.msg[1] = CEC_OP_FEATURE_ABORT;
+		tx_data.msg.msg[2] = msg->msg[1];
+		tx_data.msg.msg[3] = 4;	/* Refused */
+		return cec_transmit_msg(adap, &tx_data, false);
+
+	case CEC_OP_USER_CONTROL_PRESSED:
+		switch (msg->msg[2]) {
+		/* Play function, this message can have variable length
+		 * depending on the specific play function that is used.
+		 */
+		case 0x60:
+			if (msg->len == 3)
+				rc_keydown(adap->rc, RC_TYPE_CEC,
+					   msg->msg[2] << 8 | msg->msg[3], 0);
+			else
+				rc_keydown(adap->rc, RC_TYPE_CEC, msg->msg[2],
+					   0);
+			break;
+		/* Other function messages that are not handled.
+		 * Currently the RC framework does not allow to supply an
+		 * additional parameter to a keypress. These "keys" contain
+		 * other information such as channel number, an input number
+		 * etc.
+		 * For the time being these messages are not processed by the
+		 * framework and are simply forwarded to the user space.
+		 */
+		case 0x67: case 0x68: case 0x69: case 0x6a:
+			break;
+		default:
+			rc_keydown(adap->rc, RC_TYPE_CEC, msg->msg[2], 0);
+		}
+		break;
+	case CEC_OP_USER_CONTROL_RELEASED:
+		rc_keyup(adap->rc);
+		return 0;
+	}
+
+	if ((adap->capabilities & CEC_CAP_RECEIVE) == 0)
+		return 0;
+	mutex_lock(&adap->lock);
+	idx = (adap->rx_qstart + adap->rx_qcount) % CEC_RX_QUEUE_SZ;
+	if (adap->rx_qcount == CEC_RX_QUEUE_SZ) {
+		res = -EBUSY;
+	} else {
+		adap->rx_queue[idx] = *msg;
+		adap->rx_qcount++;
+		wake_up_interruptible(&adap->waitq);
+	}
+	mutex_unlock(&adap->lock);
+	return res;
+}
+
+int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, bool block)
+{
+	int res;
+
+	do {
+		mutex_lock(&adap->lock);
+		if (adap->rx_qcount) {
+			*msg = adap->rx_queue[adap->rx_qstart];
+			adap->rx_qstart = (adap->rx_qstart + 1) %
+					  CEC_RX_QUEUE_SZ;
+			adap->rx_qcount--;
+			res = 0;
+		} else {
+			res = -EAGAIN;
+		}
+		mutex_unlock(&adap->lock);
+		if (!block || !res)
+			break;
+		if (msg->timeout) {
+			res = wait_event_interruptible_timeout(adap->waitq,
+				adap->rx_qcount,
+				msecs_to_jiffies(msg->timeout));
+			if (res == 0)
+				res = -ETIMEDOUT;
+			else if (res > 0)
+				res = 0;
+		} else {
+			res = wait_event_interruptible(adap->waitq,
+				adap->rx_qcount);
+		}
+	} while (!res);
+	return res;
+}
+EXPORT_SYMBOL_GPL(cec_receive_msg);
+
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	struct timespec64 ts;
+	bool is_reply = false;
+
+	mutex_lock(&adap->lock);
+	ktime_get_ts64(&ts);
+	msg->ts.sec = ts.tv_sec;
+	msg->ts.nsec = ts.tv_nsec;
+	dprintk("cec_received_msg: %02x %02x\n", msg->msg[0], msg->msg[1]);
+	if (!cec_msg_is_broadcast(msg) && msg->len > 1 &&
+	    adap->state == CEC_ADAP_STATE_WAIT) {
+		struct cec_msg *dst = &adap->tx_queue[adap->tx_qstart].msg;
+
+		if (msg->msg[1] == dst->reply ||
+		    msg->msg[1] == CEC_OP_FEATURE_ABORT) {
+			*dst = *msg;
+			is_reply = true;
+			if (msg->msg[1] == CEC_OP_FEATURE_ABORT) {
+				dst->reply = 0;
+				dst->status = CEC_TX_STATUS_FEATURE_ABORT;
+			}
+			wake_up_interruptible(&adap->kthread_waitq);
+		}
+	}
+	mutex_unlock(&adap->lock);
+	if (!is_reply)
+		adap->recv_notifier(adap, msg);
+}
+EXPORT_SYMBOL_GPL(cec_received_msg);
+
+void cec_post_event(struct cec_adapter *adap, u32 event)
+{
+	struct timespec64 ts;
+	unsigned idx;
+
+	mutex_lock(&adap->lock);
+	if (adap->ev_qcount == CEC_EV_QUEUE_SZ) {
+		/* Drop oldest event */
+		adap->ev_qstart = (adap->ev_qstart + 1) % CEC_EV_QUEUE_SZ;
+		adap->ev_qcount--;
+	}
+
+	idx = (adap->ev_qstart + adap->ev_qcount) % CEC_EV_QUEUE_SZ;
+
+	adap->ev_queue[idx].event = event;
+	ktime_get_ts64(&ts);
+	adap->ev_queue[idx].ts.sec = ts.tv_sec;
+	adap->ev_queue[idx].ts.nsec = ts.tv_nsec;
+
+	adap->ev_qcount++;
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_post_event);
+
+static int cec_report_phys_addr(struct cec_adapter *adap, unsigned logical_addr)
+{
+	struct cec_data data;
+
+	/* Report Physical Address */
+	data.msg.len = 5;
+	data.msg.msg[0] = (logical_addr << 4) | 0x0f;
+	data.msg.msg[1] = CEC_OP_REPORT_PHYSICAL_ADDR;
+	data.msg.msg[2] = adap->phys_addr >> 8;
+	data.msg.msg[3] = adap->phys_addr & 0xff;
+	data.msg.msg[4] = cec_log_addr2dev(adap, logical_addr);
+	data.msg.reply = 0;
+	dprintk("config: la %d pa %x.%x.%x.%x\n",
+			logical_addr, cec_phys_addr_exp(adap->phys_addr));
+	return cec_transmit_msg(adap, &data, true);
+}
+
+int cec_enable(struct cec_adapter *adap, bool enable)
+{
+	int ret;
+
+	mutex_lock(&adap->lock);
+	ret = adap->adap_enable(adap, enable);
+	if (ret) {
+		mutex_unlock(&adap->lock);
+		return ret;
+	}
+	if (!enable) {
+		adap->state = CEC_ADAP_STATE_DISABLED;
+		adap->tx_qcount = 0;
+		adap->rx_qcount = 0;
+		adap->ev_qcount = 0;
+		adap->num_log_addrs = 0;
+	} else {
+		adap->state = CEC_ADAP_STATE_UNCONF;
+	}
+	mutex_unlock(&adap->lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cec_enable);
+
+struct cec_log_addrs_int {
+	struct cec_adapter *adap;
+	struct cec_log_addrs log_addrs;
+	struct completion c;
+	bool free_on_exit;
+	int err;
+};
+
+static int cec_config_log_addrs(struct cec_adapter *adap,
+				struct cec_log_addrs *log_addrs)
+{
+	static const u8 tv_log_addrs[] = {
+		0, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 record_log_addrs[] = {
+		1, 2, 9, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 tuner_log_addrs[] = {
+		3, 6, 7, 10, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 playback_log_addrs[] = {
+		4, 8, 11, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 audiosystem_log_addrs[] = {
+		5, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 specific_use_log_addrs[] = {
+		14, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 unregistered_log_addrs[] = {
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 *type2addrs[7] = {
+		[CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
+		[CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
+		[CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
+		[CEC_LOG_ADDR_TYPE_UNREGISTERED] = unregistered_log_addrs,
+	};
+	struct cec_data data;
+	u32 claimed_addrs = 0;
+	int i, j;
+	int err;
+
+	if (adap->phys_addr) {
+		/* The TV functionality can only map to physical address 0.
+		   For any other address, try the Specific functionality
+		   instead as per the spec. */
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] == CEC_LOG_ADDR_TYPE_TV)
+				log_addrs->log_addr_type[i] =
+						CEC_LOG_ADDR_TYPE_SPECIFIC;
+	}
+
+	memcpy(adap->prim_device, log_addrs->primary_device_type,
+			log_addrs->num_log_addrs);
+	dprintk("physical address: %x.%x.%x.%x, claim %d logical addresses\n",
+			cec_phys_addr_exp(adap->phys_addr),
+			log_addrs->num_log_addrs);
+	adap->num_log_addrs = 0;
+	adap->state = CEC_ADAP_STATE_IDLE;
+
+	/* TODO: remember last used logical addr type to achieve
+	   faster logical address polling by trying that one first.
+	 */
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		const u8 *la_list = type2addrs[log_addrs->log_addr_type[i]];
+
+		if (kthread_should_stop())
+			return -EINTR;
+
+		for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
+			u8 log_addr = la_list[j];
+
+			if (claimed_addrs & (1 << log_addr))
+				continue;
+
+			/* Send polling message */
+			data.msg.len = 1;
+			data.msg.msg[0] = 0xf0 | log_addr;
+			data.msg.reply = 0;
+			err = cec_transmit_msg(adap, &data, true);
+			if (err)
+				return err;
+			if (data.msg.status == CEC_TX_STATUS_RETRY_TIMEOUT) {
+				/* Message not acknowledged, so this logical
+				   address is free to use. */
+				claimed_addrs |= 1 << log_addr;
+				adap->log_addr[adap->num_log_addrs++] =
+								log_addr;
+				log_addrs->log_addr[i] = log_addr;
+				err = adap->adap_log_addr(adap, log_addr);
+				dprintk("claim addr %d (%d)\n", log_addr,
+							adap->prim_device[i]);
+				if (err)
+					return err;
+				cec_report_phys_addr(adap, log_addr);
+				if (adap->claimed_log_addr)
+					adap->claimed_log_addr(adap, i);
+				break;
+			}
+		}
+	}
+	if (adap->num_log_addrs == 0) {
+		if (log_addrs->num_log_addrs > 1)
+			dprintk("could not claim last %d addresses\n",
+				log_addrs->num_log_addrs - 1);
+		adap->log_addr[adap->num_log_addrs++] = 15;
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		log_addrs->log_addr[0] = 15;
+		log_addrs->num_log_addrs = 1;
+		err = adap->adap_log_addr(adap, 15);
+		dprintk("claim addr %d (%d)\n", 15, adap->prim_device[0]);
+		if (err)
+			return err;
+		cec_report_phys_addr(adap, 15);
+		if (adap->claimed_log_addr)
+			adap->claimed_log_addr(adap, 0);
+	}
+	return 0;
+}
+
+static int cec_config_thread_func(void *arg)
+{
+	struct cec_log_addrs_int *cla_int = arg;
+	int err;
+
+	cla_int->err = err = cec_config_log_addrs(cla_int->adap,
+						  &cla_int->log_addrs);
+	cla_int->adap->kthread_config = NULL;
+	if (cla_int->free_on_exit)
+		kfree(cla_int);
+	else
+		complete(&cla_int->c);
+	return err;
+}
+
+int cec_claim_log_addrs(struct cec_adapter *adap,
+			struct cec_log_addrs *log_addrs, bool block)
+{
+	struct cec_log_addrs_int *cla_int;
+	int i;
+
+	if (adap->state == CEC_ADAP_STATE_DISABLED)
+		return -EINVAL;
+
+	if (log_addrs->num_log_addrs > CEC_MAX_LOG_ADDRS)
+		return -EINVAL;
+	if (log_addrs->num_log_addrs == 0) {
+		adap->num_log_addrs = 0;
+		adap->state = CEC_ADAP_STATE_IDLE;
+		return 0;
+	}
+	if (log_addrs->cec_version != CEC_VERSION_1_4B &&
+	    log_addrs->cec_version != CEC_VERSION_2_0)
+		return -EINVAL;
+	if (log_addrs->num_log_addrs > 1)
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] ==
+					CEC_LOG_ADDR_TYPE_UNREGISTERED)
+				return -EINVAL;
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		if (log_addrs->primary_device_type[i] >
+						CEC_PRIM_DEVTYPE_VIDEOPROC)
+			return -EINVAL;
+		if (log_addrs->primary_device_type[i] == 2)
+			return -EINVAL;
+		if (log_addrs->log_addr_type[i] >
+						CEC_LOG_ADDR_TYPE_UNREGISTERED)
+			return -EINVAL;
+	}
+
+	/* For phys addr 0xffff only the Unregistered functionality is
+	   allowed. */
+	if (adap->phys_addr == 0xffff &&
+	    (log_addrs->num_log_addrs > 1 ||
+	     log_addrs->log_addr_type[0] != CEC_LOG_ADDR_TYPE_UNREGISTERED))
+		return -EINVAL;
+
+	cla_int = kzalloc(sizeof(*cla_int), GFP_KERNEL);
+	if (cla_int == NULL)
+		return -ENOMEM;
+	init_completion(&cla_int->c);
+	cla_int->free_on_exit = !block;
+	cla_int->adap = adap;
+	cla_int->log_addrs = *log_addrs;
+	adap->kthread_config = kthread_run(cec_config_thread_func, cla_int,
+							"cec_log_addrs");
+	if (block) {
+		wait_for_completion(&cla_int->c);
+		*log_addrs = cla_int->log_addrs;
+		kfree(cla_int);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cec_claim_log_addrs);
+
+static unsigned int cec_poll(struct file *filp,
+			       struct poll_table_struct *poll)
+{
+	struct cec_devnode *cecdev = cec_devnode_data(filp);
+	struct cec_adapter *adap = to_cec_adapter(cecdev);
+	unsigned res = 0;
+
+	if (!cec_devnode_is_registered(cecdev))
+		return POLLERR | POLLHUP;
+	mutex_lock(&adap->lock);
+	if (adap->tx_qcount < CEC_TX_QUEUE_SZ)
+		res |= POLLOUT | POLLWRNORM;
+	if (adap->rx_qcount)
+		res |= POLLIN | POLLRDNORM;
+	if (adap->ev_qcount)
+		res |= POLLPRI;
+	poll_wait(filp, &adap->waitq, poll);
+	mutex_unlock(&adap->lock);
+	return res;
+}
+
+static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	struct cec_devnode *cecdev = cec_devnode_data(filp);
+	struct cec_adapter *adap = to_cec_adapter(cecdev);
+	void __user *parg = (void __user *)arg;
+	int err;
+
+	if (!cec_devnode_is_registered(cecdev))
+		return -EIO;
+
+	switch (cmd) {
+	case CEC_G_CAPS: {
+		struct cec_caps caps;
+
+		caps.available_log_addrs = 3;
+		caps.capabilities = adap->capabilities;
+		caps.version = adap->version;
+		caps.vendor_id = adap->vendor_id;
+		if (copy_to_user(parg, &caps, sizeof(caps)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_TRANSMIT: {
+		struct cec_data data;
+
+		if (!(adap->capabilities & CEC_CAP_TRANSMIT))
+			return -ENOTTY;
+		if (copy_from_user(&data.msg, parg, sizeof(data.msg)))
+			return -EFAULT;
+		err = cec_transmit_msg(adap, &data,
+						!(filp->f_flags & O_NONBLOCK));
+		if (err)
+			return err;
+		if (copy_to_user(parg, &data.msg, sizeof(data.msg)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_RECEIVE: {
+		struct cec_data data;
+
+		if (!(adap->capabilities & CEC_CAP_RECEIVE))
+			return -ENOTTY;
+		if (copy_from_user(&data.msg, parg, sizeof(data.msg)))
+			return -EFAULT;
+		err = cec_receive_msg(adap, &data.msg,
+						!(filp->f_flags & O_NONBLOCK));
+		if (err)
+			return err;
+		if (copy_to_user(parg, &data.msg, sizeof(data.msg)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_G_EVENT: {
+		struct cec_event ev;
+
+		mutex_lock(&adap->lock);
+		err = -EAGAIN;
+		if (adap->ev_qcount) {
+			err = 0;
+			ev = adap->ev_queue[adap->ev_qstart];
+			adap->ev_qstart = (adap->ev_qstart + 1) %
+								CEC_EV_QUEUE_SZ;
+			adap->ev_qcount--;
+		}
+		mutex_unlock(&adap->lock);
+		if (err)
+			return err;
+		if (copy_to_user((void __user *)arg, &ev, sizeof(ev)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_G_ADAP_STATE: {
+		u32 state = adap->state != CEC_ADAP_STATE_DISABLED;
+
+		if (copy_to_user(parg, &state, sizeof(state)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_S_ADAP_STATE: {
+		u32 state;
+
+		if (!(adap->capabilities & CEC_CAP_STATE))
+			return -ENOTTY;
+		if (copy_from_user(&state, parg, sizeof(state)))
+			return -EFAULT;
+		if (!state && adap->state == CEC_ADAP_STATE_DISABLED)
+			return 0;
+		if (state && adap->state != CEC_ADAP_STATE_DISABLED)
+			return 0;
+		cec_enable(adap, !!state);
+		break;
+	}
+
+	case CEC_G_ADAP_PHYS_ADDR:
+		if (copy_to_user(parg, &adap->phys_addr,
+						sizeof(adap->phys_addr)))
+			return -EFAULT;
+		break;
+
+	case CEC_S_ADAP_PHYS_ADDR: {
+		u16 phys_addr;
+
+		if (!(adap->capabilities & CEC_CAP_PHYS_ADDR))
+			return -ENOTTY;
+		if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
+			return -EFAULT;
+		adap->phys_addr = phys_addr;
+		break;
+	}
+
+	case CEC_G_ADAP_LOG_ADDRS: {
+		struct cec_log_addrs log_addrs;
+
+		log_addrs.cec_version = adap->version;
+		log_addrs.num_log_addrs = adap->num_log_addrs;
+		memcpy(log_addrs.primary_device_type, adap->prim_device,
+							CEC_MAX_LOG_ADDRS);
+		memcpy(log_addrs.log_addr_type, adap->log_addr_type,
+							CEC_MAX_LOG_ADDRS);
+		memcpy(log_addrs.log_addr, adap->log_addr,
+							CEC_MAX_LOG_ADDRS);
+
+		if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_S_ADAP_LOG_ADDRS: {
+		struct cec_log_addrs log_addrs;
+
+		if (!(adap->capabilities & CEC_CAP_LOG_ADDRS))
+			return -ENOTTY;
+		if (copy_from_user(&log_addrs, parg, sizeof(log_addrs)))
+			return -EFAULT;
+		err = cec_claim_log_addrs(adap, &log_addrs, true);
+		if (err)
+			return err;
+
+		if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_G_VENDOR_ID:
+		if (copy_to_user(parg, &adap->vendor_id,
+						sizeof(adap->vendor_id)))
+			return -EFAULT;
+		break;
+
+	case CEC_S_VENDOR_ID: {
+		u32 vendor_id;
+
+		if (!(adap->capabilities & CEC_CAP_VENDOR_ID))
+			return -ENOTTY;
+		if (copy_from_user(&vendor_id, parg, sizeof(vendor_id)))
+			return -EFAULT;
+		/* Vendori ID is a 24 bit number, so check if the value is
+		 * within the correct range. */
+		if ((vendor_id & 0xff000000) != 0)
+			return -EINVAL;
+		adap->vendor_id = vendor_id;
+		break;
+	}
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+/* Override for the open function */
+static int cec_open(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *cecdev;
+
+	/* Check if the cec device is available. This needs to be done with
+	 * the cec_devnode_lock held to prevent an open/unregister race:
+	 * without the lock, the device could be unregistered and freed between
+	 * the cec_devnode_is_registered() and get_device() calls, leading to
+	 * a crash.
+	 */
+	mutex_lock(&cec_devnode_lock);
+	cecdev = container_of(inode->i_cdev, struct cec_devnode, cdev);
+	/* return ENXIO if the cec device has been removed
+	   already or if it is not registered anymore. */
+	if (!cec_devnode_is_registered(cecdev)) {
+		mutex_unlock(&cec_devnode_lock);
+		return -ENXIO;
+	}
+	/* and increase the device refcount */
+	get_device(&cecdev->dev);
+	mutex_unlock(&cec_devnode_lock);
+
+	filp->private_data = cecdev;
+
+	return 0;
+}
+
+/* Override for the release function */
+static int cec_release(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *cecdev = cec_devnode_data(filp);
+	int ret = 0;
+
+	/* decrease the refcount unconditionally since the release()
+	   return value is ignored. */
+	put_device(&cecdev->dev);
+	filp->private_data = NULL;
+	return ret;
+}
+
+static const struct file_operations cec_devnode_fops = {
+	.owner = THIS_MODULE,
+	.open = cec_open,
+	.unlocked_ioctl = cec_ioctl,
+	.release = cec_release,
+	.poll = cec_poll,
+	.llseek = no_llseek,
+};
+
+/**
+ * cec_devnode_register - register a cec device node
+ * @cecdev: cec device node structure we want to register
+ *
+ * The registration code assigns minor numbers and registers the new device node
+ * with the kernel. An error is returned if no free minor number can be found,
+ * or if the registration of the device node fails.
+ *
+ * Zero is returned on success.
+ *
+ * Note that if the cec_devnode_register call fails, the release() callback of
+ * the cec_devnode structure is *not* called, so the caller is responsible for
+ * freeing any data.
+ */
+static int __must_check cec_devnode_register(struct cec_devnode *cecdev,
+		struct module *owner)
+{
+	int minor;
+	int ret;
+
+	/* Part 1: Find a free minor number */
+	mutex_lock(&cec_devnode_lock);
+	minor = find_next_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES, 0);
+	if (minor == CEC_NUM_DEVICES) {
+		mutex_unlock(&cec_devnode_lock);
+		pr_err("could not get a free minor\n");
+		return -ENFILE;
+	}
+
+	set_bit(minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	cecdev->minor = minor;
+
+	/* Part 2: Initialize and register the character device */
+	cdev_init(&cecdev->cdev, &cec_devnode_fops);
+	cecdev->cdev.owner = owner;
+
+	ret = cdev_add(&cecdev->cdev, MKDEV(MAJOR(cec_dev_t), cecdev->minor),
+									1);
+	if (ret < 0) {
+		pr_err("%s: cdev_add failed\n", __func__);
+		goto error;
+	}
+
+	/* Part 3: Register the cec device */
+	cecdev->dev.bus = &cec_bus_type;
+	cecdev->dev.devt = MKDEV(MAJOR(cec_dev_t), cecdev->minor);
+	cecdev->dev.release = cec_devnode_release;
+	if (cecdev->parent)
+		cecdev->dev.parent = cecdev->parent;
+	dev_set_name(&cecdev->dev, "cec%d", cecdev->minor);
+	ret = device_register(&cecdev->dev);
+	if (ret < 0) {
+		pr_err("%s: device_register failed\n", __func__);
+		goto error;
+	}
+
+	/* Part 4: Activate this minor. The char device can now be used. */
+	set_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+
+	return 0;
+
+error:
+	cdev_del(&cecdev->cdev);
+	clear_bit(cecdev->minor, cec_devnode_nums);
+	return ret;
+}
+
+/**
+ * cec_devnode_unregister - unregister a cec device node
+ * @cecdev: the device node to unregister
+ *
+ * This unregisters the passed device. Future open calls will be met with
+ * errors.
+ *
+ * This function can safely be called if the device node has never been
+ * registered or has already been unregistered.
+ */
+static void cec_devnode_unregister(struct cec_devnode *cecdev)
+{
+	/* Check if cecdev was ever registered at all */
+	if (!cec_devnode_is_registered(cecdev))
+		return;
+
+	mutex_lock(&cec_devnode_lock);
+	clear_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+	mutex_unlock(&cec_devnode_lock);
+	device_unregister(&cecdev->dev);
+}
+
+int cec_create_adapter(struct cec_adapter *adap, const char *name, u32 caps)
+{
+	int res = 0;
+
+	adap->state = CEC_ADAP_STATE_DISABLED;
+	adap->name = name;
+	adap->phys_addr = 0xffff;
+	adap->capabilities = caps;
+	adap->version = CEC_VERSION_1_4B;
+	mutex_init(&adap->lock);
+	adap->kthread = kthread_run(cec_thread_func, adap, name);
+	init_waitqueue_head(&adap->kthread_waitq);
+	init_waitqueue_head(&adap->waitq);
+	if (IS_ERR(adap->kthread)) {
+		pr_err("cec-%s: kernel_thread() failed\n", name);
+		return PTR_ERR(adap->kthread);
+	}
+	if (caps) {
+		res = cec_devnode_register(&adap->devnode, adap->owner);
+		if (res)
+			kthread_stop(adap->kthread);
+	}
+	adap->recv_notifier = cec_receive_notify;
+
+	/* Prepare the RC input device */
+	adap->rc = rc_allocate_device();
+	if (!adap->rc) {
+		pr_err("cec-%s: failed to allocate memory for rc_dev\n", name);
+		cec_devnode_unregister(&adap->devnode);
+		kthread_stop(adap->kthread);
+		return -ENOMEM;
+	}
+
+	snprintf(adap->input_name, sizeof(adap->input_name), "RC for %s", name);
+	snprintf(adap->input_phys, sizeof(adap->input_phys), "%s/input0", name);
+	strncpy(adap->input_drv, name, sizeof(adap->input_drv));
+
+	adap->rc->input_name = adap->input_name;
+	adap->rc->input_phys = adap->input_phys;
+	adap->rc->dev.parent = &adap->devnode.dev;
+	adap->rc->driver_name = adap->input_drv;
+	adap->rc->driver_type = RC_DRIVER_CEC;
+	adap->rc->allowed_protocols = RC_BIT_CEC;
+	adap->rc->priv = adap;
+	adap->rc->map_name = RC_MAP_CEC;
+	adap->rc->timeout = MS_TO_NS(100);
+
+	res = rc_register_device(adap->rc);
+
+	if (res) {
+		pr_err("cec-%s: failed to prepare input device\n", name);
+		cec_devnode_unregister(&adap->devnode);
+		rc_free_device(adap->rc);
+		kthread_stop(adap->kthread);
+	}
+
+	return res;
+}
+EXPORT_SYMBOL_GPL(cec_create_adapter);
+
+void cec_delete_adapter(struct cec_adapter *adap)
+{
+	if (adap->kthread == NULL)
+		return;
+	kthread_stop(adap->kthread);
+	if (adap->kthread_config)
+		kthread_stop(adap->kthread_config);
+	adap->state = CEC_ADAP_STATE_DISABLED;
+	if (cec_devnode_is_registered(&adap->devnode))
+		cec_devnode_unregister(&adap->devnode);
+}
+EXPORT_SYMBOL_GPL(cec_delete_adapter);
+
+/*
+ *	Initialise cec for linux
+ */
+static int __init cec_devnode_init(void)
+{
+	int ret;
+
+	pr_info("Linux cec interface: v0.10\n");
+	ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES,
+				  CEC_NAME);
+	if (ret < 0) {
+		pr_warn("cec: unable to allocate major\n");
+		return ret;
+	}
+
+	ret = bus_register(&cec_bus_type);
+	if (ret < 0) {
+		unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+		pr_warn("cec: bus_register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit cec_devnode_exit(void)
+{
+	bus_unregister(&cec_bus_type);
+	unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+}
+
+subsys_initcall(cec_devnode_init);
+module_exit(cec_devnode_exit)
+
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@xxxxxxxxx>");
+MODULE_DESCRIPTION("Device node registration for cec drivers");
+MODULE_LICENSE("GPL");
diff --git a/include/media/cec.h b/include/media/cec.h
new file mode 100644
index 0000000..df3b9e93
--- /dev/null
+++ b/include/media/cec.h
@@ -0,0 +1,140 @@
+#ifndef _CEC_DEVNODE_H
+#define _CEC_DEVNODE_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/kthread.h>
+#include <linux/cec.h>
+#include <media/rc-core.h>
+
+#define cec_phys_addr_exp(pa) \
+	((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf
+
+/*
+ * Flag to mark the cec_devnode struct as registered. Drivers must not touch
+ * this flag directly, it will be set and cleared by cec_devnode_register and
+ * cec_devnode_unregister.
+ */
+#define CEC_FLAG_REGISTERED	0
+
+/**
+ * struct cec_devnode - cec device node
+ * @parent:	parent device
+ * @minor:	device node minor number
+ * @flags:	flags, combination of the CEC_FLAG_* constants
+ *
+ * This structure represents a cec-related device node.
+ *
+ * The @parent is a physical device. It must be set by core or device drivers
+ * before registering the node.
+ */
+struct cec_devnode {
+	/* sysfs */
+	struct device dev;		/* cec device */
+	struct cdev cdev;		/* character device */
+	struct device *parent;		/* device parent */
+
+	/* device info */
+	int minor;
+	unsigned long flags;		/* Use bitops to access flags */
+
+	/* callbacks */
+	void (*release)(struct cec_devnode *cecdev);
+};
+
+static inline int cec_devnode_is_registered(struct cec_devnode *cecdev)
+{
+	return test_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+}
+
+struct cec_adapter;
+struct cec_data;
+
+typedef int (*cec_notify)(struct cec_adapter *adap, struct cec_data *data,
+			  void *priv);
+typedef int (*cec_recv_notify)(struct cec_adapter *adap, struct cec_msg *msg);
+
+struct cec_data {
+	struct cec_msg msg;
+	cec_notify func;
+	void *priv;
+};
+
+/* Unconfigured state */
+#define CEC_ADAP_STATE_DISABLED		0
+#define CEC_ADAP_STATE_UNCONF		1
+#define CEC_ADAP_STATE_IDLE		2
+#define CEC_ADAP_STATE_TRANSMITTING	3
+#define CEC_ADAP_STATE_WAIT		4
+#define CEC_ADAP_STATE_RECEIVED		5
+
+#define CEC_TX_QUEUE_SZ	(4)
+#define CEC_RX_QUEUE_SZ	(4)
+#define CEC_EV_QUEUE_SZ	(16)
+
+struct cec_adapter {
+	struct module *owner;
+	const char *name;
+	struct cec_devnode devnode;
+	struct mutex lock;
+	struct rc_dev *rc;
+
+	struct cec_data tx_queue[CEC_TX_QUEUE_SZ];
+	u8 tx_qstart, tx_qcount;
+
+	struct cec_msg rx_queue[CEC_RX_QUEUE_SZ];
+	u8 rx_qstart, rx_qcount;
+
+	struct cec_event ev_queue[CEC_EV_QUEUE_SZ];
+	u8 ev_qstart, ev_qcount;
+
+	cec_recv_notify recv_notifier;
+	struct task_struct *kthread_config;
+
+	struct task_struct *kthread;
+	wait_queue_head_t kthread_waitq;
+	wait_queue_head_t waitq;
+
+	u8 state;
+	u32 capabilities;
+	u16 phys_addr;
+	u32 vendor_id;
+	u8 version;
+	u8 num_log_addrs;
+	u8 prim_device[CEC_MAX_LOG_ADDRS];
+	u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	u8 log_addr[CEC_MAX_LOG_ADDRS];
+	u8 promiscuous;
+
+	char input_name[32];
+	char input_phys[32];
+	char input_drv[32];
+
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+	int (*adap_transmit)(struct cec_adapter *adap, struct cec_msg *msg);
+	void (*adap_transmit_timed_out)(struct cec_adapter *adap);
+
+	void (*claimed_log_addr)(struct cec_adapter *adap, u8 idx);
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+};
+
+#define to_cec_adapter(node) container_of(node, struct cec_adapter, devnode)
+
+int cec_create_adapter(struct cec_adapter *adap, const char *name, u32 caps);
+void cec_delete_adapter(struct cec_adapter *adap);
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data,
+		     bool block);
+int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, bool block);
+void cec_post_event(struct cec_adapter *adap, u32 event);
+int cec_claim_log_addrs(struct cec_adapter *adap,
+			struct cec_log_addrs *log_addrs, bool block);
+int cec_enable(struct cec_adapter *adap, bool enable);
+
+/* Called by the adapter */
+void cec_transmit_done(struct cec_adapter *adap, u32 status);
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
+
+#endif /* _CEC_DEVNODE_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 4842a98..5854cfd 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -81,6 +81,7 @@ header-y += capi.h
  header-y += cciss_defs.h
  header-y += cciss_ioctl.h
  header-y += cdrom.h
+header-y += cec.h
  header-y += cgroupstats.h
  header-y += chio.h
  header-y += cm4000_cs.h
diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
new file mode 100644
index 0000000..bb6d66c
--- /dev/null
+++ b/include/uapi/linux/cec.h
@@ -0,0 +1,303 @@
+#ifndef _CEC_H
+#define _CEC_H
+
+#include <linux/types.h>
+
+struct cec_time {
+	__u64 sec;
+	__u64 nsec;
+};
+
+struct cec_msg {
+	struct cec_time ts;
+	__u32 len;
+	__u32 status;
+	__u32 timeout;
+	/* timeout (in ms) is used to timeout CEC_RECEIVE.
+	   Set to 0 if you want to wait forever. */
+	__u8  msg[16];
+	__u8  reply;
+	/* If non-zero, then wait for a reply with this opcode.
+	   If there was an error when sending the msg or FeatureAbort
+	   was returned, then reply is set to 0.
+	   If reply is non-zero upon return, then len/msg are set to
+	   the received message.
+	   If reply is zero upon return and status has the
+	   CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to the
+	   received feature abort message.
+	   If reply is zero upon return and status has the
+	   CEC_TX_STATUS_REPLY_TIMEOUT
+	   bit set, then no reply was seen at all.
+	   This field is ignored with CEC_RECEIVE.
+	   If reply is non-zero for CEC_TRANSMIT and the message is a broadcast,
+	   then -EINVAL is returned.
+	   if reply is non-zero, then timeout is set to 1000 (the required
+	   maximum response time).
+	 */
+	__u8 reserved[31];
+};
+
+static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
+{
+	return msg->msg[0] >> 4;
+}
+
+static inline __u8 cec_msg_destination(const struct cec_msg *msg)
+{
+	return msg->msg[0] & 0xf;
+}
+
+static inline bool cec_msg_is_broadcast(const struct cec_msg *msg)
+{
+	return (msg->msg[0] & 0xf) == 0xf;
+}
+
+/* cec status field */
+#define CEC_TX_STATUS_OK            (0)
+#define CEC_TX_STATUS_ARB_LOST      (1 << 0)
+#define CEC_TX_STATUS_RETRY_TIMEOUT (1 << 1)
+#define CEC_TX_STATUS_FEATURE_ABORT (1 << 2)
+#define CEC_TX_STATUS_REPLY_TIMEOUT (1 << 3)
+#define CEC_RX_STATUS_READY         (0)
+
+#define CEC_LOG_ADDR_INVALID 0xff
+
+/* The maximum number of logical addresses one device can be assigned to.
+ * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
+ * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
+#define CEC_MAX_LOG_ADDRS 4
+
+/* The "Primary Device Type" */
+#define CEC_PRIM_DEVTYPE_TV		0
+#define CEC_PRIM_DEVTYPE_RECORD		1
+#define CEC_PRIM_DEVTYPE_TUNER		3
+#define CEC_PRIM_DEVTYPE_PLAYBACK	4
+#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM	5
+#define CEC_PRIM_DEVTYPE_SWITCH		6
+#define CEC_PRIM_DEVTYPE_VIDEOPROC	7
+
+/* The "All Device Types" flags (CEC 2.0) */
+#define CEC_FL_ALL_DEVTYPE_TV		(1 << 7)
+#define CEC_FL_ALL_DEVTYPE_RECORD	(1 << 6)
+#define CEC_FL_ALL_DEVTYPE_TUNER	(1 << 5)
+#define CEC_FL_ALL_DEVTYPE_PLAYBACK	(1 << 4)
+#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM	(1 << 3)
+#define CEC_FL_ALL_DEVTYPE_SWITCH	(1 << 2)
+/* And if you wondering what happened to VIDEOPROC devices: those should
+ * be mapped to a SWITCH. */
+
+/* The logical address types that the CEC device wants to claim */
+#define CEC_LOG_ADDR_TYPE_TV		0
+#define CEC_LOG_ADDR_TYPE_RECORD	1
+#define CEC_LOG_ADDR_TYPE_TUNER		2
+#define CEC_LOG_ADDR_TYPE_PLAYBACK	3
+#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM	4
+#define CEC_LOG_ADDR_TYPE_SPECIFIC	5
+#define CEC_LOG_ADDR_TYPE_UNREGISTERED	6
+/* Switches should use UNREGISTERED.
+ * Video processors should use SPECIFIC. */
+
+/* The CEC version */
+#define CEC_VERSION_1_4B		5
+#define CEC_VERSION_2_0			6
+
+struct cec_event {
+	struct cec_time ts;
+	__u32 event;
+	__u8 reserved[4];
+};
+
+/* The CEC state */
+#define CEC_STATE_DISABLED		0
+#define CEC_STATE_ENABLED		1
+
+/* Userspace has to configure the adapter state (enable/disable) */
+#define CEC_CAP_STATE		(1 << 0)
+/* Userspace has to configure the physical address */
+#define CEC_CAP_PHYS_ADDR	(1 << 1)
+/* Userspace has to configure the logical addresses */
+#define CEC_CAP_LOG_ADDRS	(1 << 2)
+/* Userspace can transmit messages */
+#define CEC_CAP_TRANSMIT	(1 << 3)
+/* Userspace can receive messages */
+#define CEC_CAP_RECEIVE		(1 << 4)
+/* Userspace has to configure the vendor id */
+#define CEC_CAP_VENDOR_ID	(1 << 5)
+/* The hardware has the possibility to work in the promiscuous mode */
+#define CEC_CAP_PROMISCUOUS	(1 << 6)
+
+struct cec_caps {
+	__u32 available_log_addrs;
+	__u32 capabilities;
+	__u32 vendor_id;
+	__u8  version;
+	__u8  reserved[11];
+};
+
+struct cec_log_addrs {
+	__u8 cec_version;
+	__u8 num_log_addrs;
+	__u8 primary_device_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr[CEC_MAX_LOG_ADDRS];
+
+	/* CEC 2.0 */
+	__u8 all_device_types;
+	__u8 features[CEC_MAX_LOG_ADDRS][12];
+
+	__u8 reserved[9];
+};
+
+/* Commands */
+
+/* One Touch Play Feature */
+#define CEC_OP_ACTIVE_SOURCE			0x82
+#define CEC_OP_IMAGE_VIEW_ON			0x04
+#define CEC_OP_TEXT_VIEW_ON			0x0d
+
+/* Routing Control Feature */
+#define CEC_OP_ACTIVE_SOURCE			0x82
+#define CEC_OP_INACTIVE_SOURCE			0x9d
+#define CEC_OP_REQUEST_ACTIVE_SOURCE		0x85
+#define CEC_OP_ROUTING_CHANGE			0x80
+#define CEC_OP_ROUTING_INFORMATION		0x81
+#define CEC_OP_SET_STREAM_PATH			0x86
+
+/* Standby Feature */
+#define CEC_OP_STANDBY				0x36
+
+/* One Touch Record Feature */
+#define CEC_OP_RECORD_OFF			0x0b
+#define CEC_OP_RECORD_ON			0x09
+#define CEC_OP_RECORD_STATUS			0x0a
+#define CEC_OP_RECORD_TV_SCREEN			0x0f
+
+/* Timer Programming Feature */
+#define CEC_OP_CLEAR_ANALOGUE_TIMER		0x33
+#define CEC_OP_CLEAR_DIGITAL_TIMER		0x99
+#define CEC_OP_CLEAR_EXT_TIMER			0xa1
+#define CEC_OP_SET_ANALOGUE_TIMER		0x34
+#define CEC_OP_SET_DIGITAL_TIMER		0x97
+#define CEC_OP_SET_EXT_TIMER			0xa2
+#define CEC_OP_SET_EXT_PROGRAM_TIMER		0x67
+#define CEC_OP_TIMER_CLEARED_STATUS		0x43
+#define CEC_OP_TIMER_STATUS			0x35
+
+/* System Information Feature */
+#define CEC_OP_CEC_VERSION			0x9e
+#define CEC_OP_GET_CEC_VERSION			0x9f
+#define CEC_OP_GIVE_PHYSICAL_ADDR		0x83
+#define CEC_OP_GET_MENU_LANGUAGE		0x91
+#define CEC_OP_REPORT_PHYSICAL_ADDR		0x84
+#define CEC_OP_SET_MENU_LANGUAGE		0x32
+
+/* Deck Control Feature */
+#define CEC_OP_DECK_CONTROL			0x42
+#define CEC_OP_DECK_STATUS			0x1b
+#define CEC_OP_GIVE_DECK_STATUS			0x1a
+#define CEC_OP_PLAY				0x41
+
+/* Tuner Control Feature */
+#define CEC_OP_GIVE_TUNER_DEVICE_STATUS		0x08
+#define CEC_OP_SELECT_ANALOGUE_SERVICE		0x92
+#define CEC_OP_SELECT_DIGITAL_SERVICE		0x93
+#define CEC_OP_TUNER_DEVICE_STATUS		0x07
+#define CEC_OP_TUNER_STEP_DECREMENT		0x06
+#define CEC_OP_TUNER_STEP_INCREMENT		0x05
+
+/* Vendor Specific Commands Feature */
+#define CEC_OP_CEC_VERSION			0x9e
+#define CEC_OP_DEVICE_VENDOR_ID			0x87
+#define CEC_OP_GET_CEC_VERSION			0x9f
+#define CEC_OP_GIVE_DEVICE_VENDOR_ID		0x8c
+#define CEC_OP_VENDOR_COMMAND			0x89
+#define CEC_OP_VENDOR_COMMAND_WITH_ID		0xa0
+#define CEC_OP_VENDOR_REMOTE_BUTTON_DOWN	0x8a
+#define CEC_OP_VENDOR_REMOTE_BUTTON_UP		0x8b
+
+/* OSD Display Feature */
+#define CEC_OP_SET_OSD_STRING			0x64
+
+/* Device OSD Transfer Feature */
+#define CEC_OP_GIVE_OSD_NAME			0x46
+#define CEC_OP_SET_OSD_NAME			0x47
+
+/* Device Menu Control Feature */
+#define CEC_OP_MENU_REQUEST			0x8d
+#define CEC_OP_MENU_STATUS			0x8e
+#define CEC_OP_USER_CONTROL_PRESSED		0x44
+#define CEC_OP_USER_CONTROL_RELEASED		0x45
+
+/* Power Status Feature */
+#define CEC_OP_GIVE_DEVICE_POWER_STATUS		0x8f
+#define CEC_OP_REPORT_POWER_STATUS		0x90
+#define CEC_OP_FEATURE_ABORT			0x00
+#define CEC_OP_ABORT				0xff
+
+/* System Audio Control Feature */
+#define CEC_OP_GIVE_AUDIO_STATUS		0x71
+#define CEC_OP_GIVE_SYSTEM_AUDIO_MODE_STATUS	0x7d
+#define CEC_OP_REPORT_AUDIO_STATUS		0x7a
+#define CEC_OP_SET_SYSTEM_AUDIO_MODE		0x72
+#define CEC_OP_SYSTEM_AUDIO_MODE_REQUEST	0x70
+#define CEC_OP_SYSTEM_AUDIO_MODE_STATUS		0x7e
+
+/* Audio Rate Control Feature */
+#define CEC_OP_SET_AUDIO_RATE			0x9a
+
+/* Events */
+/* Event that occurs when a cable is connected */
+#define CEC_EVENT_CONNECT	1
+/* Event that occurs when all logical addresses were claimed */
+#define CEC_EVENT_READY		2
+/* Event that is sent when the cable is disconnected */
+#define CEC_EVENT_DISCONNECT	3
+
+/* ioctls */
+
+/* issue a CEC command */
+#define CEC_G_CAPS		_IOWR('a', 0, struct cec_caps)
+#define CEC_TRANSMIT		_IOWR('a', 1, struct cec_msg)
+#define CEC_RECEIVE		_IOWR('a', 2, struct cec_msg)
+
+/*
+   Configure the CEC adapter. It sets the device type and which
+   logical types it will try to claim. It will return which
+   logical addresses it could actually claim.
+   An error is returned if the adapter is disabled or if there
+   is no physical address assigned.
+ */
+
+#define CEC_G_ADAP_LOG_ADDRS	_IOR('a', 3, struct cec_log_addrs)
+#define CEC_S_ADAP_LOG_ADDRS	_IOWR('a', 4, struct cec_log_addrs)
+
+/*
+   Enable/disable the adapter. The Set state ioctl may not
+   be available if that is handled internally.
+ */
+#define CEC_G_ADAP_STATE	_IOR('a', 5, __u32)
+#define CEC_S_ADAP_STATE	_IOW('a', 6, __u32)
+
+/*
+   phys_addr is either 0 (if this is the CEC root device)
+   or a valid physical address obtained from the sink's EDID
+   as read by this CEC device (if this is a source device)
+   or a physical address obtained and modified from a sink
+   EDID and used for a sink CEC device.
+   If nothing is connected, then phys_addr is 0xffff.
+   See HDMI 1.4b, section 8.7 (Physical Address).
+
+   The Set ioctl may not be available if that is handled
+   internally.
+ */
+#define CEC_G_ADAP_PHYS_ADDR	_IOR('a', 7, __u16)
+#define CEC_S_ADAP_PHYS_ADDR	_IOW('a', 8, __u16)
+
+#define CEC_G_EVENT		_IOWR('a', 9, struct cec_event)
+/*
+   Read and set the vendor ID of the CEC adapter.
+ */
+#define CEC_G_VENDOR_ID		_IOR('a', 9, __u32)
+#define CEC_S_VENDOR_ID		_IOW('a', 10, __u32)
+
+#endif

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux