Hi Sjoerd, Correct. Will do so. I just included in this series. As it relevant to my changes and testing. -Anand Moon On 8 April 2015 at 14:12, Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx> wrote: > > > On Wed, 2015-04-08 at 10:28 +0200, Lukasz Majewski wrote: >> Hi Anand, >> >> > From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx> >> > When disabling the samsung PWM the output state remains at the level >> > it was in the end of a pwm cycle. In other words, calling pwm_disable >> > when at 100% duty will keep the output active, while at all other >> > setting the output will go/stay inactive. On top of that the samsung >> > PWM settings are double-buffered, which means the new settings only >> > get applied at the start of a new PWM cycle. > > This patch is already in the linux-pwm for-next tree so should probably > be dropped form this patchset to prevent conflicts. > > -- > Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx> > Collabora Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |