Commit 26ab1c62b6e1 ("cpufreq: exynos5250: Set APLL rate
using CCF API") removed the last user of ->need_apll_change
method. Remove it and then cleanup exynos_cpufreq_scale()
accordingly.
This patch was tested on Exynos4412 SoC based Trats2 board.
There should be no functional changes caused by this patch.
Cc: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Cc: Kukjin Kim <kgene@xxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/cpufreq/exynos-cpufreq.c | 30 +++---------------------------
drivers/cpufreq/exynos-cpufreq.h | 1 -
2 files changed, 3 insertions(+), 28 deletions(-)
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 82d2fbb..01ed166 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -45,11 +45,9 @@ static int exynos_cpufreq_get_index(unsigned int freq)
static int exynos_cpufreq_scale(unsigned int target_freq)
{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
unsigned int *volt_table = exynos_info->volt_table;
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
- unsigned int arm_volt, safe_arm_volt = 0;
- unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+ unsigned int arm_volt;
struct device *dev = exynos_info->dev;
unsigned int old_freq;
int index, old_index;
@@ -74,21 +72,10 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
goto out;
}
- /*
- * ARM clock source will be changed APLL to MPLL temporary
- * To support this level, need to control regulator for
- * required voltage level
- */
- if (exynos_info->need_apll_change != NULL) {
- if (exynos_info->need_apll_change(old_index, index) &&
- (freq_table[index].frequency < mpll_freq_khz) &&
- (freq_table[old_index].frequency < mpll_freq_khz))
- safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
- }
arm_volt = volt_table[index];
/* When the new frequency is higher than current frequency */
- if ((target_freq > old_freq) && !safe_arm_volt) {
+ if (target_freq > old_freq) {
/* Firstly, voltage up to increase frequency */
ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
if (ret) {
@@ -98,21 +85,10 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
}
}
- if (safe_arm_volt) {
- ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
- safe_arm_volt);
- if (ret) {
- dev_err(dev, "failed to set cpu voltage to %d\n",
- safe_arm_volt);
- return ret;
- }
- }
-
exynos_info->set_freq(old_index, index);
/* When the new frequency is lower than current frequency */
- if ((target_freq < old_freq) ||
- ((target_freq > old_freq) && safe_arm_volt)) {
+ if (target_freq < old_freq) {
/* down the voltage after frequency change */
ret = regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 9f2062a..fe5a105 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -49,7 +49,6 @@ struct exynos_dvfs_info {
unsigned int *volt_table;
struct cpufreq_frequency_table *freq_table;
void (*set_freq)(unsigned int, unsigned int);
- bool (*need_apll_change)(unsigned int, unsigned int);
void __iomem *cmu_regs;
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
