Sylwester Nawrocki wrote:
>
> On 23/03/15 03:51, Inha Song wrote:
> > Add MAX98090 audio codec, I2S interface and the sound nodes to support
> > audio on Exynos5422 SoC Based Odroid-XU3 board. Now we can support audio
> > in Odroid-XU3 board using simple-audio-card DT binding.
> >
> > Signed-off-by: Inha Song <ideal.song@xxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/exynos5420.dtsi | 9 +++++
> > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 57 ++++++++++++++++++++++++++++++
> > 2 files changed, 66 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> > index 4eaeabe..e459c1d 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -415,6 +415,9 @@
> > <&clock_audss EXYNOS_I2S_BUS>,
> > <&clock_audss EXYNOS_SCLK_I2S>;
> > clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
> > + #clock-cells = <1>;
> > + clock-output-names = "i2s_cdclk0";
> > + #sound-dai-cells = <1>;
> > samsung,idma-addr = <0x03000000>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&i2s0_bus>;
> > @@ -429,6 +432,9 @@
> > dma-names = "tx", "rx";
> > clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
> > clock-names = "iis", "i2s_opclk0";
> > + #clock-cells = <1>;
> > + clock-output-names = "i2s_cdclk1";
> > + #sound-dai-cells = <1>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&i2s1_bus>;
> > status = "disabled";
> > @@ -442,6 +448,9 @@
> > dma-names = "tx", "rx";
> > clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
> > clock-names = "iis", "i2s_opclk0";
> > + #clock-cells = <1>;
> > + clock-output-names = "i2s_cdclk2";
> > + #sound-dai-cells = <1>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&i2s2_bus>;
> > status = "disabled";
> > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > index edc25cf..9275ad6 100644
> > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > @@ -11,6 +11,7 @@
> > */
> >
> > /dts-v1/;
> > +#include <dt-bindings/sound/samsung-i2s.h>
> > #include "exynos5800.dtsi"
> >
> > / {
> > @@ -285,6 +286,62 @@
> > rtc@101E0000 {
> > status = "okay";
> > };
> > +
> > + sound: sound {
> > + compatible = "simple-audio-card";
> > + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> > + <&clock_audss EXYNOS_MOUT_I2S>,
> > + <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> > + assigned-clock-parents = <&clock CLK_FIN_PLL>,
> > + <&clock_audss EXYNOS_MOUT_AUDSS>;
> > + assigned-clock-rates = <0>,
> > + <0>,
> > + <19200000>;
>
> The patch looks good, except it would be more appropriate to move the
> above properties to &clock_audss { }; node in this file.
> With that change feel free to add:
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
>
> As a side note, this is a dts patch and of course Kukjin maintains that.
> You would likely get it applied sooner if you would have addressed it
> directly to Kukjin, rather than Mark or me.
>
Yes, please. I'll apply this once you address comments per Sylwester's
suggestion.
Thanks,
Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
