There are two PMICs on Cragganmore, currently one dynamically assign
its IRQ base and the other uses a fixed base. It is possible for the
statically assigned PMIC to fail if its IRQ is taken by the dynamically
assigned one. Fix this by statically assigning both the IRQ bases.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-s3c64xx/crag6410.h | 1 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
index 7bc6668..dcbe17f 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c64xx/crag6410.h
@@ -14,6 +14,7 @@
#include <mach/gpio-samsung.h>
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 10b913b..65c426b 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -554,6 +554,7 @@ static struct wm831x_touch_pdata touch_pdata = {
static struct wm831x_pdata crag_pmic_pdata = {
.wm831x_num = 1,
+ .irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
