This patch adds the thermal-zones devicetree node for Exynos5433 SoC.
The thermal-zones has five thermal-zones and then each thermal-zone contains
each thermal-sensor to monitor the temperature of own IP. The {atlas0|apollo}_
thermal zone have the eight trip-points for interrupt method to detect the
over-temperature.
Cc: Kukjin Kim <kgene@xxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Reviewed-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 +
2 files changed, 232 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 0000000..7ff7b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2015 Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+ atlas0_thermal: atlas0-thermal {
+ thermal-sensors = <&tmu_atlas0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas0_alert_0: atlas0-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_1: atlas0-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_2: atlas0-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_3: atlas0-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_4: atlas0-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_5: atlas0-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_6: atlas0-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ atlas1_thermal: atlas1-thermal {
+ thermal-sensors = <&tmu_atlas1>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas1_alert_0: atlas1-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_1: atlas1-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_2: atlas1-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_3: atlas1-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_4: atlas1-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_5: atlas1-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_6: atlas1-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ g3d_thermal: g3d-thermal {
+ thermal-sensors = <&tmu_g3d>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ g3d_alert_0: g3d-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_1: g3d-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_2: g3d-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_3: g3d-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_4: g3d-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_5: g3d-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_6: g3d-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ };
+
+ apollo_thermal: apollo-thermal {
+ thermal-sensors = <&tmu_apollo>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ apollo_alert_0: apollo-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_1: apollo-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_2: apollo-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_3: apollo-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_4: apollo-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_5: apollo-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_6: apollo-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ isp_thermal: isp-thermal {
+ thermal-sensors = <&tmu_isp>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ isp_alert_0: isp-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_1: isp-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_2: isp-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_3: isp-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_4: isp-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_5: isp-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_6: isp-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1fe0c23..faea1c6 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -928,3 +928,4 @@
};
#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
--
1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
