Hi Chanwoo,
> This patch adds the thermal-zones devicetree node for Exynos5433 SoC.
> The thermal-zones has five thermal-zones and then each thermal-zone
> contains each thermal-sensor to monitor the temperature of own IP.
> The {atlas0|apollo}_ thermal zone have the eight trip-points for
> interrupt method to detect the over-temperature.
>
> Cc: Kukjin Kim <kgene@xxxxxxxxxx>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231
> +++++++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 + 2 files
> changed, 232 insertions(+) create mode 100644
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi new file mode 100644
> index 0000000..7ff7b0e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> @@ -0,0 +1,231 @@
> +/*
> + * Device tree sources for Exynos5433 thermal zone
> + *
> + * Copyright (c) 2015 Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +thermal-zones {
> + atlas0_thermal: atlas0-thermal {
> + thermal-sensors = <&tmu_atlas0>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas0_alert_0: atlas0-alert-0 {
> + temperature = <80000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_1: atlas0-alert-1 {
> + temperature = <85000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_2: atlas0-alert-2 {
> + temperature = <90000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_3: atlas0-alert-3 {
> + temperature = <95000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_4: atlas0-alert-4 {
> + temperature = <100000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_5: atlas0-alert-5 {
> + temperature = <105000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas0_alert_6: atlas0-alert-6 {
> + temperature = <110000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + atlas1_thermal: atlas1-thermal {
> + thermal-sensors = <&tmu_atlas1>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas1_alert_0: atlas1-alert-0 {
> + temperature = <80000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_1: atlas1-alert-1 {
> + temperature = <85000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_2: atlas1-alert-2 {
> + temperature = <90000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_3: atlas1-alert-3 {
> + temperature = <95000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_4: atlas1-alert-4 {
> + temperature = <100000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_5: atlas1-alert-5 {
> + temperature = <105000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + atlas1_alert_6: atlas1-alert-6 {
> + temperature = <110000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + g3d_thermal: g3d-thermal {
> + thermal-sensors = <&tmu_g3d>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + g3d_alert_0: g3d-alert-0 {
> + temperature = <80000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_1: g3d-alert-1 {
> + temperature = <85000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_2: g3d-alert-2 {
> + temperature = <90000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_3: g3d-alert-3 {
> + temperature = <95000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_4: g3d-alert-4 {
> + temperature = <100000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_5: g3d-alert-5 {
> + temperature = <105000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + g3d_alert_6: g3d-alert-6 {
> + temperature = <110000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + };
> +
> + };
> +
> + apollo_thermal: apollo-thermal {
> + thermal-sensors = <&tmu_apollo>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + apollo_alert_0: apollo-alert-0 {
> + temperature = <80000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_1: apollo-alert-1 {
> + temperature = <85000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_2: apollo-alert-2 {
> + temperature = <90000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_3: apollo-alert-3 {
> + temperature = <95000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_4: apollo-alert-4 {
> + temperature = <100000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_5: apollo-alert-5 {
> + temperature = <105000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + apollo_alert_6: apollo-alert-6 {
> + temperature = <110000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + isp_thermal: isp-thermal {
> + thermal-sensors = <&tmu_isp>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + isp_alert_0: isp-alert-0 {
> + temperature = <80000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_1: isp-alert-1 {
> + temperature = <85000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_2: isp-alert-2 {
> + temperature = <90000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_3: isp-alert-3 {
> + temperature = <95000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_4: isp-alert-4 {
> + temperature = <100000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_5: isp-alert-5 {
> + temperature = <105000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + isp_alert_6: isp-alert-6 {
> + temperature = <110000>; /*
> millicelsius */
> + hysteresis = <10000>; /*
> millicelsius */
> + type = "active";
> + };
> + };
> + };
> +};
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index b44ddcc..fbce27d
> 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -964,3 +964,4 @@
> };
>
> #include "exynos5433-pinctrl.dtsi"
> +#include "exynos5433-tmu.dtsi"
Reviewed-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
