Hello,
On 2015-02-24 14:39, Tobias Jakobi wrote:
Hello Marek,
sorry for the late response!
On 2015-02-10 12:38, Marek Szyprowski wrote:
Hello,
On 2015-02-09 21:28, Tobias Jakobi wrote:
Hello!
Marek Szyprowski wrote:
I didn't observe any issues with 'ondemand' governor. I've just
tested it
on next-20150204 with "[PATCH v2 0/3] Add support for hardware
reset of
eMMC
card on reboot" patches added
(http://www.spinics.net/lists/linux-mmc/msg30621.html) and reboot
works
fine.
Since I'm not using an eMMC card, I don't think the pwrseq stuff is
going to make a difference here.
Have you checked this with the PS_HOLD patch applied, or without?
Anyway, guess I'm going to recheck this, maybe with some other
governors
too.
PS_HOLD patch is related to shutdown behavior. Reboot doesn't use it.
Could you
point which exactly version did you use and provide the .config which
causes
problems with normal reboot when system runs from SD card? For eMMC
you would
need patches from last linux-next.
I'm currently using this tree:
https://github.com/tobiasjakobi/linux-odroid
In this is the config:
https://raw.githubusercontent.com/tobiasjakobi/odroid-environment/master/sourcecode/system/vanilla-3.19-debug.conf
Upon issuing reboot I get this here on the UART:
chidori ~ # reboot
Broadcast message from root@chidori (ttySAC1) (Mon Feb 23 17:04:44 2015):
The system is going down for reboot NOW!
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
chidori ~ # * Stopping
local [ ok ]
* Stopping vixie-cron
... [ ok ]
* Saving random seed
... [ ok ]
* Deactivating additional swap space
... [ ok ]
* Stopping sshd
... [ ok ]
* Unmounting network filesystems
... [ ok ]
* Stopping chronyd
... [ ok ]
* Stopping BlueTooth NAP
... [ ok ]
* Stopping dnsmasq
... [ ok ]
* Stopping syslog-ng
... [ ok ]
* Shutting down bluetooth
... [ ok ]
* Stopping D-BUS system messagebus
... [ ok ]
* Unmounting loop devices
* Unmounting filesystems
* Unmounting /usr/local/emu
... [ ok ]
* Unmounting /home
... [ ok ]
* Unmounting /var
... [ ok ]
* Deactivating swap devices
... [ ok ]
* Stopping udev
... [ ok ]
* Saving the shutdown time
... [ ok ]
* Terminating remaining processes
... [ ok ]
* Killing remaining processes
... [ ok ]
* Saving dependency cache
... [ ok ]
* Remounting remaining filesystems read-only ...
* Remounting / read only ...
[ 113.526626] EXT4-fs (mmcblk0p2): re-mounted. Opts:
(null) [ ok ]
[ 115.609592] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[
Notice the open bracket in the last line. Seems like there is still
output in the kernel buffer, but the UART is maybe switched off before
one can see that. At least there is nothing after that, and I have to
manually restart the board then.
I've just checked and it works fine with my Odroid U3+ board booted from
SD card. I have really no idea what wrong here... Could you check if the
same problem exist with vanilla v4.0-rc1 kernel?
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
