[PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The gpio-samsung driver is special in the sense that it
interacts directly in multiple ways with the legacy platform
code for the s3c24xx and s3c64xx platforms. In contrast,
all devicetree based machines for Samsung, including the
ones on those two SoC families use a different driver.

The header files that define the interface between the platform
code and the gpio driver are not visible when building a
kernel for ARCH_MULTIPLATFORM, which prevents us from
turning on this option for s3c64xx.

To work around this, we now move the driver back into platform
code, from where it was originally moved to as part of commit
1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
Samsung GPIOs").

The long-term plan for this driver would be to remove it
entirely, after all Samsung machines have been converted
over to boot from DT, but there is currently no timeline
for when that might happen.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 arch/arm/plat-samsung/Kconfig                          | 3 +++
 arch/arm/plat-samsung/Makefile                         | 2 ++
 {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
 drivers/gpio/Kconfig                                   | 7 -------
 drivers/gpio/Makefile                                  | 1 -
 5 files changed, 5 insertions(+), 8 deletions(-)
 rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index cb8e3d655d1a..1df08180f2a5 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -311,6 +311,9 @@ config SAMSUNG_WDT_RESET
 	  Compile support for system restart by triggering watchdog reset.
 	  Used on SoCs that do not provide dedicated reset control.
 
+config GPIO_SAMSUNG
+	def_bool SAMSUNG_ATAGS
+
 config DEBUG_S3C_UART
 	depends on PLAT_SAMSUNG
 	int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 1a29ab1f446d..7896ddf63974 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
 
+obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
+
 # PM support
 
 obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
diff --git a/drivers/gpio/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
similarity index 100%
rename from drivers/gpio/gpio-samsung.c
rename to arch/arm/plat-samsung/gpio-samsung.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c1e2ca3d9a51..2ebc124e1217 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -296,13 +296,6 @@ config GPIO_RCAR
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
 
-config GPIO_SAMSUNG
-	bool
-	depends on PLAT_SAMSUNG
-	help
-	  Legacy GPIO support. Use only for platforms without support for
-	  pinctrl.
-
 config GPIO_SCH311X
 	tristate "SMSC SCH311x SuperI/O GPIO"
 	help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index bdda6a94d2cd..0e48e5d89d63 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -73,7 +73,6 @@ obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 obj-$(CONFIG_GPIO_RCAR)		+= gpio-rcar.o
-obj-$(CONFIG_GPIO_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_SCH311X)	+= gpio-sch311x.o
-- 
2.1.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux