Dear, Rob. On 02/25/2015 11:38 PM, Rob Herring wrote: > On Wed, Jan 28, 2015 at 8:41 PM, Alim Akhtar <alim.akhtar@xxxxxxxxxxx> wrote: >> From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx> >> >> Implements HS400 mode support for exynos host driver. >> This also include some updates as new mode is added. >> >> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx> >> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> >> [Alim: addressed review comments] >> --- >> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 7 + >> drivers/mmc/host/dw_mmc-exynos.c | 185 ++++++++++++++++---- >> drivers/mmc/host/dw_mmc-exynos.h | 19 +- >> drivers/mmc/host/dw_mmc.c | 16 +- >> drivers/mmc/host/dw_mmc.h | 2 + >> 5 files changed, 195 insertions(+), 34 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> index ee4fc05..aad9844 100644 >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> @@ -36,6 +36,8 @@ Required Properties: >> in transmit mode and CIU clock phase shift value in receive mode for double >> data rate mode operation. Refer notes below for the order of the cells and the >> valid values. >> +* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase >> + shift value for hs400 mode operation. > > What are the units? Do you means what is "sumsung,dw-mshci-hs400-timing" unit? It's timing value for eMMC/SD/SDIO clock phase.(It's exynos specific value.) Using timing value can shift the H/W clock phase. If invalid timing value is set, eMMC/SD/SDIO can produce the CRC error. Do you think it can't include into device-tree? I want to know your thinking. let me know, plz. Best Regards, Jaehoon Chung > > Rob > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |