Re: [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 25, 2015 at 02:28:15PM +0100, Lukasz Majewski wrote:
> Hi Eduardo,
> 
> > On Wed, Feb 18, 2015 at 11:07:33AM +0100, Lukasz Majewski wrote:
> > > With those bindings it is possible to use pwm-fan device available
> > > in Odroid U3 as a cooling device.
> > > 
> > > Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> > > ---
> > > Changes for v2:
> > > - Rename cooling-pwm-values property to cooling-levels
> > > Changes for v3:
> > > - Change patch's topic to "ARM dts"
> > > - Reduce maximal cooling-level to 230 from 255
> > > Changes for v4:
> > > - None
> > > ---
> > >  arch/arm/boot/dts/exynos4412-odroidu3.dts | 33
> > > ++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1
> > > deletion(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > > b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 60bd1e4..3e5df3e
> > > 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > > +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > > @@ -32,11 +32,42 @@
> > >  		};
> > >  	};
> > >  
> > > -	pwm-fan {
> > > +	fan0: pwm-fan {
> > >  		compatible = "pwm-fan";
> > >  		pwms = <&pwm 0 10000 0>;
> > > +		cooling-min-state = <0>;
> > > +		cooling-max-state = <3>;
> > > +		#cooling-cells = <2>;
> > > +		cooling-levels = <0 102 170 230>;
> > >  		status = "okay";
> > >  	};
> > > +
> > > +	thermal-zones {
> > > +		cpu_thermal: cpu-thermal {
> > 
> > 
> > This thermal zone misses the mandatory properties as per 
> >  Documentation/devicetree/bindings/thermal/thermal.txt
> 
> Following mandatory properties:
> 		thermal-sensors = <&tmu 0>;
> 		polling-delay-passive = <0>;
> 		polling-delay = <0>;
> 		trips {
> 
> 		}
> 
> are defined in exynos4-cpu-thermal.dtsi included by this file.
> 
> In this patch only device dependent changes are stated.

OK. I missed that.



> 
> > 
> > > +			cooling-maps {
> > > +				map0 {
> > > +				     trip = <&cpu_alert1>;
> > > +				     cooling-device = <&cpu0 7 7>;
> > > +				};
> > > +				map1 {
> > > +				     trip = <&cpu_alert2>;
> > > +				     cooling-device = <&cpu0 13
> > > 13>;
> > > +				};
> > > +				map2 {
> > > +				     trip = <&cpu_alert0>;
> > > +				     cooling-device = <&fan0 0 1>;
> > > +				};
> > > +				map3 {
> > > +				     trip = <&cpu_alert1>;
> > > +				     cooling-device = <&fan0 1 2>;
> > > +				};
> > > +				map4 {
> > > +				     trip = <&cpu_alert2>;
> > > +				     cooling-device = <&fan0 2 3>;
> > > +				};
> > > +			};
> > > +		};
> > > +	};
> > >  };
> > >  
> > >  &pwm {
> > > -- 
> > > 2.0.0.rc2
> > > 
> 
> 
> 
> -- 
> Best regards,
> 
> Lukasz Majewski
> 
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux