Re: [PATCH V4] drm/exynos: Add DECON driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Your patch had a minor issue which is the use of config name,
DRM_EXYNOS_DECON. The config name should be changed to DRM_EXYNOS7_DECON
to distinguish DECON controller of Exynos7 and one of Exynos5433. I
remember that we had already a discussion about it.

So I fixed it up and applied.

Thanks,
Inki Dae

On 2015년 02월 11일 19:43, Ajay kumar wrote:
> ping.
> 
> On Thu, Feb 5, 2015 at 9:24 PM, Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> wrote:
>> This patch is based on exynos-drm-next branch of Inki Dae's tree at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
>>
>> DECON(Display and Enhancement Controller) is the new IP
>> in exynos7 SOC for generating video signals using pixel data.
>>
>> DECON driver can be used to drive 2 different interfaces on Exynos7:
>> DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)
>>
>> The existing FIMD driver code was used as a template to create
>> DECON driver. Only DECON-INT is supported as of now, and
>> DECON-EXT support will be added later.
>>
>> The current version of the driver supports video mode displays.
>>
>> Signed-off-by: Akshu Agrawal <akshua@xxxxxxxxx>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> ---
>> Changes since V1:
>>         -- Address comments from Pankaj and do few cleanups.
>> Changes since V2:
>>         -- Address more comments from Pankaj and cleanup.
>> Changes since V3:
>>         -- Rebase on exynos-drm-next. Pull in changes from
>>            FIMD driver.
>>         -- Address comments from Inki Dae. Remove unnecessary
>>            functions and delays. Make use of i80-if-timings
>>            node to differentiate between command/video mode.
>>
>>  .../devicetree/bindings/video/exynos7-decon.txt    |   68 ++
>>  drivers/gpu/drm/exynos/Kconfig                     |   13 +-
>>  drivers/gpu/drm/exynos/Makefile                    |    1 +
>>  drivers/gpu/drm/exynos/exynos7_drm_decon.c         |  991 ++++++++++++++++++++
>>  drivers/gpu/drm/exynos/exynos_drm_drv.c            |    4 +
>>  drivers/gpu/drm/exynos/exynos_drm_drv.h            |    1 +
>>  include/video/exynos7_decon.h                      |  349 +++++++
>>  7 files changed, 1424 insertions(+), 3 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/video/exynos7-decon.txt
>>  create mode 100644 drivers/gpu/drm/exynos/exynos7_drm_decon.c
>>  create mode 100644 include/video/exynos7_decon.h
>>
>> diff --git a/Documentation/devicetree/bindings/video/exynos7-decon.txt b/Documentation/devicetree/bindings/video/exynos7-decon.txt
>> new file mode 100644
>> index 0000000..f5f9c8d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/exynos7-decon.txt
>> @@ -0,0 +1,68 @@
>> +Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
>> +
>> +DECON (Display and Enhancement Controller) is the Display Controller for the
>> +Exynos7 series of SoCs which transfers the image data from a video memory
>> +buffer to an external LCD interface.
>> +
>> +Required properties:
>> +- compatible: value should be "samsung,exynos7-decon";
>> +
>> +- reg: physical base address and length of the DECON registers set.
>> +
>> +- interrupt-parent: should be the phandle of the decon controller's
>> +               parent interrupt controller.
>> +
>> +- interrupts: should contain a list of all DECON IP block interrupts in the
>> +                order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
>> +                format depends on the interrupt controller used.
>> +
>> +- interrupt-names: should contain the interrupt names: "fifo", "vsync",
>> +       "lcd_sys", in the same order as they were listed in the interrupts
>> +        property.
>> +
>> +- pinctrl-0: pin control group to be used for this controller.
>> +
>> +- pinctrl-names: must contain a "default" entry.
>> +
>> +- clocks: must include clock specifiers corresponding to entries in the
>> +         clock-names property.
>> +
>> +- clock-names: list of clock names sorted in the same order as the clocks
>> +               property. Must contain "pclk_decon0", "aclk_decon0",
>> +              "decon0_eclk", "decon0_vclk".
>> +- i80-if-timings: timing configuration for lcd i80 interface support.
>> +
>> +Optional Properties:
>> +- samsung,power-domain: a phandle to DECON power domain node.
>> +- display-timings: timing settings for DECON, as described in document [1].
>> +               Can be used in case timings cannot be provided otherwise
>> +               or to override timings provided by the panel.
>> +
>> +[1]: Documentation/devicetree/bindings/video/display-timing.txt
>> +
>> +Example:
>> +
>> +SoC specific DT entry:
>> +
>> +       decon@13930000 {
>> +               compatible = "samsung,exynos7-decon";
>> +               interrupt-parent = <&combiner>;
>> +               reg = <0x13930000 0x1000>;
>> +               interrupt-names = "lcd_sys", "vsync", "fifo";
>> +               interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
>> +               clocks = <&clock_disp PCLK_DECON_INT>,
>> +                        <&clock_disp ACLK_DECON_INT>,
>> +                        <&clock_disp SCLK_DECON_INT_ECLK>,
>> +                        <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
>> +               clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
>> +                               "decon0_vclk";
>> +               status = "disabled";
>> +       };
>> +
>> +Board specific DT entry:
>> +
>> +       decon@13930000 {
>> +               pinctrl-0 = <&lcd_clk &pwm1_out>;
>> +               pinctrl-names = "default";
>> +               status = "okay";
>> +       };
>> diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
>> index 627aaa0..378cfd5 100644
>> --- a/drivers/gpu/drm/exynos/Kconfig
>> +++ b/drivers/gpu/drm/exynos/Kconfig
>> @@ -24,9 +24,16 @@ config DRM_EXYNOS_FIMD
>>         help
>>           Choose this option if you want to use Exynos FIMD for DRM.
>>
>> +config DRM_EXYNOS_DECON
>> +       bool "Exynos DRM DECON"
>> +       depends on DRM_EXYNOS
>> +       select FB_MODE_HELPERS
>> +       help
>> +         Choose this option if you want to use Exynos DECON for DRM.
>> +
>>  config DRM_EXYNOS_DPI
>>         bool "EXYNOS DRM parallel output support"
>> -       depends on DRM_EXYNOS_FIMD
>> +       depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
>>         select DRM_PANEL
>>         default n
>>         help
>> @@ -34,7 +41,7 @@ config DRM_EXYNOS_DPI
>>
>>  config DRM_EXYNOS_DSI
>>         bool "EXYNOS DRM MIPI-DSI driver support"
>> -       depends on DRM_EXYNOS_FIMD
>> +       depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
>>         select DRM_MIPI_DSI
>>         select DRM_PANEL
>>         default n
>> @@ -43,7 +50,7 @@ config DRM_EXYNOS_DSI
>>
>>  config DRM_EXYNOS_DP
>>         bool "EXYNOS DRM DP driver support"
>> -       depends on DRM_EXYNOS_FIMD && ARCH_EXYNOS && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>> +       depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON) && ARCH_EXYNOS && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>>         default DRM_EXYNOS
>>         select DRM_PANEL
>>         help
>> diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
>> index 0856891..aec058c 100644
>> --- a/drivers/gpu/drm/exynos/Makefile
>> +++ b/drivers/gpu/drm/exynos/Makefile
>> @@ -10,6 +10,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
>>
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)    += exynos_drm_fimd.o
>> +exynosdrm-$(CONFIG_DRM_EXYNOS_DECON)   += exynos7_drm_decon.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DPI)     += exynos_drm_dpi.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DSI)     += exynos_drm_dsi.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DP)      += exynos_dp_core.o exynos_dp_reg.o
>> diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> new file mode 100644
>> index 0000000..c610293
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> @@ -0,0 +1,990 @@
>> +/* drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> + *
>> + * Copyright (C) 2014 Samsung Electronics Co.Ltd
>> + * Authors:
>> + *     Akshu Agarwal <akshua@xxxxxxxxx>
>> + *     Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + *
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/exynos_drm.h>
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include <video/of_display_timing.h>
>> +#include <video/of_videomode.h>
>> +#include <video/exynos7_decon.h>
>> +
>> +#include "exynos_drm_crtc.h"
>> +#include "exynos_drm_drv.h"
>> +#include "exynos_drm_fbdev.h"
>> +#include "exynos_drm_iommu.h"
>> +
>> +/*
>> + * DECON stands for Display and Enhancement controller.
>> + */
>> +
>> +#define DECON_DEFAULT_FRAMERATE 60
>> +#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
>> +
>> +#define WINDOWS_NR     2
>> +
>> +struct decon_win_data {
>> +       unsigned int            ovl_x;
>> +       unsigned int            ovl_y;
>> +       unsigned int            offset_x;
>> +       unsigned int            offset_y;
>> +       unsigned int            ovl_width;
>> +       unsigned int            ovl_height;
>> +       unsigned int            fb_width;
>> +       unsigned int            fb_height;
>> +       unsigned int            bpp;
>> +       unsigned int            pixel_format;
>> +       dma_addr_t              dma_addr;
>> +       bool                    enabled;
>> +       bool                    resume;
>> +};
>> +
>> +struct decon_context {
>> +       struct device                   *dev;
>> +       struct drm_device               *drm_dev;
>> +       struct exynos_drm_crtc          *crtc;
>> +       struct clk                      *pclk;
>> +       struct clk                      *aclk;
>> +       struct clk                      *eclk;
>> +       struct clk                      *vclk;
>> +       void __iomem                    *regs;
>> +       struct decon_win_data           win_data[WINDOWS_NR];
>> +       unsigned int                    default_win;
>> +       unsigned long                   irq_flags;
>> +       bool                            i80_if;
>> +       bool                            suspended;
>> +       int                             pipe;
>> +       wait_queue_head_t               wait_vsync_queue;
>> +       atomic_t                        wait_vsync_event;
>> +
>> +       struct exynos_drm_panel_info panel;
>> +       struct exynos_drm_display *display;
>> +};
>> +
>> +static const struct of_device_id decon_driver_dt_match[] = {
>> +       { .compatible = "samsung,exynos7-decon"},
>> +       {},
>> +};
>> +MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
>> +
>> +static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +
>> +       if (ctx->suspended)
>> +               return;
>> +
>> +       atomic_set(&ctx->wait_vsync_event, 1);
>> +
>> +       /*
>> +        * wait for DECON to signal VSYNC interrupt or return after
>> +        * timeout which is set to 50ms (refresh rate of 20).
>> +        */
>> +       if (!wait_event_timeout(ctx->wait_vsync_queue,
>> +                               !atomic_read(&ctx->wait_vsync_event),
>> +                               HZ/20))
>> +               DRM_DEBUG_KMS("vblank wait timed out.\n");
>> +}
>> +
>> +static void decon_clear_channel(struct decon_context *ctx)
>> +{
>> +       int win, ch_enabled = 0;
>> +
>> +       DRM_DEBUG_KMS("%s\n", __FILE__);
>> +
>> +       /* Check if any channel is enabled. */
>> +       for (win = 0; win < WINDOWS_NR; win++) {
>> +               u32 val = readl(ctx->regs + WINCON(win));
>> +
>> +               if (val & WINCONx_ENWIN) {
>> +                       val &= ~WINCONx_ENWIN;
>> +                       writel(val, ctx->regs + WINCON(win));
>> +                       ch_enabled = 1;
>> +               }
>> +       }
>> +
>> +       /* Wait for vsync, as disable channel takes effect at next vsync */
>> +       if (ch_enabled) {
>> +               unsigned int state = ctx->suspended;
>> +
>> +               ctx->suspended = 0;
>> +               decon_wait_for_vblank(ctx->crtc);
>> +               ctx->suspended = state;
>> +       }
>> +}
>> +
>> +static int decon_ctx_initialize(struct decon_context *ctx,
>> +                       struct drm_device *drm_dev)
>> +{
>> +       struct exynos_drm_private *priv = drm_dev->dev_private;
>> +
>> +       ctx->drm_dev = drm_dev;
>> +       ctx->pipe = priv->pipe++;
>> +
>> +       /* attach this sub driver to iommu mapping if supported. */
>> +       if (is_drm_iommu_supported(ctx->drm_dev)) {
>> +               int ret;
>> +
>> +               /*
>> +                * If any channel is already active, iommu will throw
>> +                * a PAGE FAULT when enabled. So clear any channel if enabled.
>> +                */
>> +               decon_clear_channel(ctx);
>> +               ret = drm_iommu_attach_device(ctx->drm_dev, ctx->dev);
>> +               if (ret) {
>> +                       DRM_ERROR("drm_iommu_attach failed.\n");
>> +                       return ret;
>> +               }
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void decon_ctx_remove(struct decon_context *ctx)
>> +{
>> +       /* detach this sub driver from iommu mapping if supported. */
>> +       if (is_drm_iommu_supported(ctx->drm_dev))
>> +               drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
>> +}
>> +
>> +static u32 decon_calc_clkdiv(struct decon_context *ctx,
>> +               const struct drm_display_mode *mode)
>> +{
>> +       unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh;
>> +       u32 clkdiv;
>> +
>> +       /* Find the clock divider value that gets us closest to ideal_clk */
>> +       clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
>> +
>> +       return (clkdiv < 0x100) ? clkdiv : 0xff;
>> +}
>> +
>> +static bool decon_mode_fixup(struct exynos_drm_crtc *crtc,
>> +               const struct drm_display_mode *mode,
>> +               struct drm_display_mode *adjusted_mode)
>> +{
>> +       if (adjusted_mode->vrefresh == 0)
>> +               adjusted_mode->vrefresh = DECON_DEFAULT_FRAMERATE;
>> +
>> +       return true;
>> +}
>> +
>> +static void decon_commit(struct exynos_drm_crtc *crtc)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       struct drm_display_mode *mode = &crtc->base.mode;
>> +       u32 val, clkdiv;
>> +
>> +       if (ctx->suspended)
>> +               return;
>> +
>> +       /* nothing to do if we haven't set the mode yet */
>> +       if (mode->htotal == 0 || mode->vtotal == 0)
>> +               return;
>> +
>> +       if (!ctx->i80_if) {
>> +               int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
>> +             /* setup vertical timing values. */
>> +               vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
>> +               vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
>> +               vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
>> +
>> +               val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
>> +               writel(val, ctx->regs + VIDTCON0);
>> +
>> +               val = VIDTCON1_VSPW(vsync_len - 1);
>> +               writel(val, ctx->regs + VIDTCON1);
>> +
>> +               /* setup horizontal timing values.  */
>> +               hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
>> +               hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
>> +               hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
>> +
>> +               /* setup horizontal timing values.  */
>> +               val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
>> +               writel(val, ctx->regs + VIDTCON2);
>> +
>> +               val = VIDTCON3_HSPW(hsync_len - 1);
>> +               writel(val, ctx->regs + VIDTCON3);
>> +       }
>> +
>> +       /* setup horizontal and vertical display size. */
>> +       val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
>> +              VIDTCON4_HOZVAL(mode->hdisplay - 1);
>> +       writel(val, ctx->regs + VIDTCON4);
>> +
>> +       writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
>> +
>> +       /*
>> +        * fields of register with prefix '_F' would be updated
>> +        * at vsync(same as dma start)
>> +        */
>> +       val = VIDCON0_ENVID | VIDCON0_ENVID_F;
>> +       writel(val, ctx->regs + VIDCON0);
>> +
>> +       clkdiv = decon_calc_clkdiv(ctx, mode);
>> +       if (clkdiv > 1) {
>> +               val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
>> +               writel(val, ctx->regs + VCLKCON1);
>> +               writel(val, ctx->regs + VCLKCON2);
>> +       }
>> +
>> +       val = readl(ctx->regs + DECON_UPDATE);
>> +       val |= DECON_UPDATE_STANDALONE_F;
>> +       writel(val, ctx->regs + DECON_UPDATE);
>> +}
>> +
>> +static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       u32 val;
>> +
>> +       if (ctx->suspended)
>> +               return -EPERM;
>> +
>> +       if (!test_and_set_bit(0, &ctx->irq_flags)) {
>> +               val = readl(ctx->regs + VIDINTCON0);
>> +
>> +               val |= VIDINTCON0_INT_ENABLE;
>> +
>> +               if (!ctx->i80_if) {
>> +                       val |= VIDINTCON0_INT_FRAME;
>> +                       val &= ~VIDINTCON0_FRAMESEL0_MASK;
>> +                       val |= VIDINTCON0_FRAMESEL0_VSYNC;
>> +               }
>> +
>> +               writel(val, ctx->regs + VIDINTCON0);
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       u32 val;
>> +
>> +       if (ctx->suspended)
>> +               return;
>> +
>> +       if (test_and_clear_bit(0, &ctx->irq_flags)) {
>> +               val = readl(ctx->regs + VIDINTCON0);
>> +
>> +               val &= ~VIDINTCON0_INT_ENABLE;
>> +               if (!ctx->i80_if)
>> +                       val &= ~VIDINTCON0_INT_FRAME;
>> +
>> +               writel(val, ctx->regs + VIDINTCON0);
>> +       }
>> +}
>> +
>> +static void decon_win_mode_set(struct exynos_drm_crtc *crtc,
>> +                       struct exynos_drm_plane *plane)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       struct decon_win_data *win_data;
>> +       int win, padding;
>> +
>> +       if (!plane) {
>> +               DRM_ERROR("plane is NULL\n");
>> +               return;
>> +       }
>> +
>> +       win = plane->zpos;
>> +       if (win == DEFAULT_ZPOS)
>> +               win = ctx->default_win;
>> +
>> +       if (win < 0 || win >= WINDOWS_NR)
>> +               return;
>> +
>> +
>> +       win_data = &ctx->win_data[win];
>> +
>> +       padding = (plane->pitch / (plane->bpp >> 3)) - plane->fb_width;
>> +       win_data->offset_x = plane->fb_x;
>> +       win_data->offset_y = plane->fb_y;
>> +       win_data->fb_width = plane->fb_width + padding;
>> +       win_data->fb_height = plane->fb_height;
>> +       win_data->ovl_x = plane->crtc_x;
>> +       win_data->ovl_y = plane->crtc_y;
>> +       win_data->ovl_width = plane->crtc_width;
>> +       win_data->ovl_height = plane->crtc_height;
>> +       win_data->dma_addr = plane->dma_addr[0];
>> +       win_data->bpp = plane->bpp;
>> +       win_data->pixel_format = plane->pixel_format;
>> +
>> +       DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
>> +                       win_data->offset_x, win_data->offset_y);
>> +       DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> +                       win_data->ovl_width, win_data->ovl_height);
>> +       DRM_DEBUG_KMS("paddr = 0x%lx\n", (unsigned long)win_data->dma_addr);
>> +       DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
>> +                       plane->fb_width, plane->crtc_width);
>> +}
>> +
>> +static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win)
>> +{
>> +       struct decon_win_data *win_data = &ctx->win_data[win];
>> +       unsigned long val;
>> +
>> +       val = readl(ctx->regs + WINCON(win));
>> +       val &= ~WINCONx_BPPMODE_MASK;
>> +
>> +       switch (win_data->pixel_format) {
>> +       case DRM_FORMAT_RGB565:
>> +               val |= WINCONx_BPPMODE_16BPP_565;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_XRGB8888:
>> +               val |= WINCONx_BPPMODE_24BPP_xRGB;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_XBGR8888:
>> +               val |= WINCONx_BPPMODE_24BPP_xBGR;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_RGBX8888:
>> +               val |= WINCONx_BPPMODE_24BPP_RGBx;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_BGRX8888:
>> +               val |= WINCONx_BPPMODE_24BPP_BGRx;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_ARGB8888:
>> +               val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
>> +                       WINCONx_ALPHA_SEL;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_ABGR8888:
>> +               val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
>> +                       WINCONx_ALPHA_SEL;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_RGBA8888:
>> +               val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
>> +                       WINCONx_ALPHA_SEL;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       case DRM_FORMAT_BGRA8888:
>> +               val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
>> +                       WINCONx_ALPHA_SEL;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       default:
>> +               DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
>> +
>> +               val |= WINCONx_BPPMODE_24BPP_xRGB;
>> +               val |= WINCONx_BURSTLEN_16WORD;
>> +               break;
>> +       }
>> +
>> +       DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp);
>> +
>> +       /*
>> +        * In case of exynos, setting dma-burst to 16Word causes permanent
>> +        * tearing for very small buffers, e.g. cursor buffer. Burst Mode
>> +        * switching which is based on plane size is not recommended as
>> +        * plane size varies a lot towards the end of the screen and rapid
>> +        * movement causes unstable DMA which results into iommu crash/tear.
>> +        */
>> +
>> +       if (win_data->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
>> +               val &= ~WINCONx_BURSTLEN_MASK;
>> +               val |= WINCONx_BURSTLEN_8WORD;
>> +       }
>> +
>> +       writel(val, ctx->regs + WINCON(win));
>> +}
>> +
>> +static void decon_win_set_colkey(struct decon_context *ctx, unsigned int win)
>> +{
>> +       unsigned int keycon0 = 0, keycon1 = 0;
>> +
>> +       keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
>> +                       WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
>> +
>> +       keycon1 = WxKEYCON1_COLVAL(0xffffffff);
>> +
>> +       writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
>> +       writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
>> +}
>> +
>> +/**
>> + * shadow_protect_win() - disable updating values from shadow registers at vsync
>> + *
>> + * @win: window to protect registers for
>> + * @protect: 1 to protect (disable updates)
>> + */
>> +static void decon_shadow_protect_win(struct decon_context *ctx,
>> +                                                       int win, bool protect)
>> +{
>> +       u32 bits, val;
>> +
>> +       bits = SHADOWCON_WINx_PROTECT(win);
>> +
>> +       val = readl(ctx->regs + SHADOWCON);
>> +       if (protect)
>> +               val |= bits;
>> +       else
>> +               val &= ~bits;
>> +       writel(val, ctx->regs + SHADOWCON);
>> +}
>> +
>> +static void decon_win_commit(struct exynos_drm_crtc *crtc, int zpos)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       struct drm_display_mode *mode = &crtc->base.mode;
>> +       struct decon_win_data *win_data;
>> +       int win = zpos;
>> +       unsigned long val, alpha;
>> +       unsigned int last_x;
>> +       unsigned int last_y;
>> +
>> +       if (ctx->suspended)
>> +               return;
>> +
>> +       if (win == DEFAULT_ZPOS)
>> +               win = ctx->default_win;
>> +
>> +       if (win < 0 || win >= WINDOWS_NR)
>> +               return;
>> +
>> +       win_data = &ctx->win_data[win];
>> +
>> +       /* If suspended, enable this on resume */
>> +       if (ctx->suspended) {
>> +               win_data->resume = true;
>> +               return;
>> +       }
>> +
>> +       /*
>> +        * SHADOWCON/PRTCON register is used for enabling timing.
>> +        *
>> +        * for example, once only width value of a register is set,
>> +        * if the dma is started then decon hardware could malfunction so
>> +        * with protect window setting, the register fields with prefix '_F'
>> +        * wouldn't be updated at vsync also but updated once unprotect window
>> +        * is set.
>> +        */
>> +
>> +       /* protect windows */
>> +       decon_shadow_protect_win(ctx, win, true);
>> +
>> +       /* buffer start address */
>> +       val = (unsigned long)win_data->dma_addr;
>> +       writel(val, ctx->regs + VIDW_BUF_START(win));
>> +
>> +       /* buffer size */
>> +       writel(win_data->fb_width, ctx->regs + VIDW_WHOLE_X(win));
>> +       writel(win_data->fb_height, ctx->regs + VIDW_WHOLE_Y(win));
>> +
>> +       /* offset from the start of the buffer to read */
>> +       writel(win_data->offset_x, ctx->regs + VIDW_OFFSET_X(win));
>> +       writel(win_data->offset_y, ctx->regs + VIDW_OFFSET_Y(win));
>> +
>> +       DRM_DEBUG_KMS("start addr = 0x%lx\n",
>> +                       (unsigned long)win_data->dma_addr);
>> +       DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> +                       win_data->ovl_width, win_data->ovl_height);
>> +
>> +       /*
>> +        * OSD position.
>> +        * In case the window layout goes of LCD layout, DECON fails.
>> +        */
>> +       if ((win_data->ovl_x + win_data->ovl_width) > mode->hdisplay)
>> +               win_data->ovl_x = mode->hdisplay - win_data->ovl_width;
>> +       if ((win_data->ovl_y + win_data->ovl_height) > mode->vdisplay)
>> +               win_data->ovl_y = mode->vdisplay - win_data->ovl_height;
>> +
>> +       val = VIDOSDxA_TOPLEFT_X(win_data->ovl_x) |
>> +               VIDOSDxA_TOPLEFT_Y(win_data->ovl_y);
>> +       writel(val, ctx->regs + VIDOSD_A(win));
>> +
>> +       last_x = win_data->ovl_x + win_data->ovl_width;
>> +       if (last_x)
>> +               last_x--;
>> +       last_y = win_data->ovl_y + win_data->ovl_height;
>> +       if (last_y)
>> +               last_y--;
>> +
>> +       val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
>> +
>> +       writel(val, ctx->regs + VIDOSD_B(win));
>> +
>> +       DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
>> +                       win_data->ovl_x, win_data->ovl_y, last_x, last_y);
>> +
>> +       /* OSD alpha */
>> +       alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
>> +                       VIDOSDxC_ALPHA0_G_F(0x0) |
>> +                       VIDOSDxC_ALPHA0_B_F(0x0);
>> +
>> +       writel(alpha, ctx->regs + VIDOSD_C(win));
>> +
>> +       alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
>> +                       VIDOSDxD_ALPHA1_G_F(0xff) |
>> +                       VIDOSDxD_ALPHA1_B_F(0xff);
>> +
>> +       writel(alpha, ctx->regs + VIDOSD_D(win));
>> +
>> +       decon_win_set_pixfmt(ctx, win);
>> +
>> +       /* hardware window 0 doesn't support color key. */
>> +       if (win != 0)
>> +               decon_win_set_colkey(ctx, win);
>> +
>> +       /* wincon */
>> +       val = readl(ctx->regs + WINCON(win));
>> +       val |= WINCONx_TRIPLE_BUF_MODE;
>> +       val |= WINCONx_ENWIN;
>> +       writel(val, ctx->regs + WINCON(win));
>> +
>> +       /* Enable DMA channel and unprotect windows */
>> +       decon_shadow_protect_win(ctx, win, false);
>> +
>> +       val = readl(ctx->regs + DECON_UPDATE);
>> +       val |= DECON_UPDATE_STANDALONE_F;
>> +       writel(val, ctx->regs + DECON_UPDATE);
>> +
>> +       win_data->enabled = true;
>> +}
>> +
>> +static void decon_win_disable(struct exynos_drm_crtc *crtc, int zpos)
>> +{
>> +       struct decon_context *ctx = crtc->ctx;
>> +       struct decon_win_data *win_data;
>> +       int win = zpos;
>> +       u32 val;
>> +
>> +       if (win == DEFAULT_ZPOS)
>> +               win = ctx->default_win;
>> +
>> +       if (win < 0 || win >= WINDOWS_NR)
>> +               return;
>> +
>> +       win_data = &ctx->win_data[win];
>> +
>> +       if (ctx->suspended) {
>> +               /* do not resume this window*/
>> +               win_data->resume = false;
>> +               return;
>> +       }
>> +
>> +       /* protect windows */
>> +       decon_shadow_protect_win(ctx, win, true);
>> +
>> +       /* wincon */
>> +       val = readl(ctx->regs + WINCON(win));
>> +       val &= ~WINCONx_ENWIN;
>> +       writel(val, ctx->regs + WINCON(win));
>> +
>> +       /* unprotect windows */
>> +       decon_shadow_protect_win(ctx, win, false);
>> +
>> +       val = readl(ctx->regs + DECON_UPDATE);
>> +       val |= DECON_UPDATE_STANDALONE_F;
>> +       writel(val, ctx->regs + DECON_UPDATE);
>> +
>> +       win_data->enabled = false;
>> +}
>> +
>> +static void decon_window_suspend(struct decon_context *ctx)
>> +{
>> +       struct decon_win_data *win_data;
>> +       int i;
>> +
>> +       for (i = 0; i < WINDOWS_NR; i++) {
>> +               win_data = &ctx->win_data[i];
>> +               win_data->resume = win_data->enabled;
>> +               if (win_data->enabled)
>> +                       decon_win_disable(ctx->crtc, i);
>> +       }
>> +}
>> +
>> +static void decon_window_resume(struct decon_context *ctx)
>> +{
>> +       struct decon_win_data *win_data;
>> +       int i;
>> +
>> +       for (i = 0; i < WINDOWS_NR; i++) {
>> +               win_data = &ctx->win_data[i];
>> +               win_data->enabled = win_data->resume;
>> +               win_data->resume = false;
>> +       }
>> +}
>> +
>> +static void decon_apply(struct decon_context *ctx)
>> +{
>> +       struct decon_win_data *win_data;
>> +       int i;
>> +
>> +       for (i = 0; i < WINDOWS_NR; i++) {
>> +               win_data = &ctx->win_data[i];
>> +               if (win_data->enabled)
>> +                       decon_win_commit(ctx->crtc, i);
>> +               else
>> +                       decon_win_disable(ctx->crtc, i);
>> +       }
>> +
>> +       decon_commit(ctx->crtc);
>> +}
>> +
>> +static void decon_init(struct decon_context *ctx)
>> +{
>> +       u32 val;
>> +
>> +       writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
>> +
>> +       val = VIDOUTCON0_DISP_IF_0_ON;
>> +       if (!ctx->i80_if)
>> +               val |= VIDOUTCON0_RGBIF;
>> +       writel(val, ctx->regs + VIDOUTCON0);
>> +
>> +       writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
>> +
>> +       if (!ctx->i80_if)
>> +               writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0));
>> +}
>> +
>> +static int decon_poweron(struct decon_context *ctx)
>> +{
>> +       int ret;
>> +
>> +       if (!ctx->suspended)
>> +               return 0;
>> +
>> +       ctx->suspended = false;
>> +
>> +       pm_runtime_get_sync(ctx->dev);
>> +
>> +       ret = clk_prepare_enable(ctx->pclk);
>> +       if (ret < 0) {
>> +               DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
>> +               goto pclk_err;
>> +       }
>> +
>> +       ret = clk_prepare_enable(ctx->aclk);
>> +       if (ret < 0) {
>> +               DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
>> +               goto aclk_err;
>> +       }
>> +
>> +       ret = clk_prepare_enable(ctx->eclk);
>> +       if  (ret < 0) {
>> +               DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
>> +               goto eclk_err;
>> +       }
>> +
>> +       ret = clk_prepare_enable(ctx->vclk);
>> +       if  (ret < 0) {
>> +               DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
>> +               goto vclk_err;
>> +       }
>> +
>> +       decon_init(ctx);
>> +
>> +       /* if vblank was enabled status, enable it again. */
>> +       if (test_and_clear_bit(0, &ctx->irq_flags)) {
>> +               ret = decon_enable_vblank(ctx->crtc);
>> +               if (ret) {
>> +                       DRM_ERROR("Failed to re-enable vblank [%d]\n", ret);
>> +                       goto err;
>> +               }
>> +       }
>> +
>> +       decon_window_resume(ctx);
>> +
>> +       decon_apply(ctx);
>> +
>> +       return 0;
>> +
>> +err:
>> +       clk_disable_unprepare(ctx->vclk);
>> +vclk_err:
>> +       clk_disable_unprepare(ctx->eclk);
>> +eclk_err:
>> +       clk_disable_unprepare(ctx->aclk);
>> +aclk_err:
>> +       clk_disable_unprepare(ctx->pclk);
>> +pclk_err:
>> +       ctx->suspended = true;
>> +       return ret;
>> +}
>> +
>> +static int decon_poweroff(struct decon_context *ctx)
>> +{
>> +       if (ctx->suspended)
>> +               return 0;
>> +
>> +       /*
>> +        * We need to make sure that all windows are disabled before we
>> +        * suspend that connector. Otherwise we might try to scan from
>> +        * a destroyed buffer later.
>> +        */
>> +       decon_window_suspend(ctx);
>> +
>> +       clk_disable_unprepare(ctx->vclk);
>> +       clk_disable_unprepare(ctx->eclk);
>> +       clk_disable_unprepare(ctx->aclk);
>> +       clk_disable_unprepare(ctx->pclk);
>> +
>> +       pm_runtime_put_sync(ctx->dev);
>> +
>> +       ctx->suspended = true;
>> +       return 0;
>> +}
>> +
>> +static void decon_dpms(struct exynos_drm_crtc *crtc, int mode)
>> +{
>> +       DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode);
>> +
>> +       switch (mode) {
>> +       case DRM_MODE_DPMS_ON:
>> +               decon_poweron(crtc->ctx);
>> +               break;
>> +       case DRM_MODE_DPMS_STANDBY:
>> +       case DRM_MODE_DPMS_SUSPEND:
>> +       case DRM_MODE_DPMS_OFF:
>> +               decon_poweroff(crtc->ctx);
>> +               break;
>> +       default:
>> +               DRM_DEBUG_KMS("unspecified mode %d\n", mode);
>> +               break;
>> +       }
>> +}
>> +
>> +static struct exynos_drm_crtc_ops decon_crtc_ops = {
>> +       .dpms = decon_dpms,
>> +       .mode_fixup = decon_mode_fixup,
>> +       .commit = decon_commit,
>> +       .enable_vblank = decon_enable_vblank,
>> +       .disable_vblank = decon_disable_vblank,
>> +       .wait_for_vblank = decon_wait_for_vblank,
>> +       .win_mode_set = decon_win_mode_set,
>> +       .win_commit = decon_win_commit,
>> +       .win_disable = decon_win_disable,
>> +};
>> +
>> +
>> +static irqreturn_t decon_irq_handler(int irq, void *dev_id)
>> +{
>> +       struct decon_context *ctx = (struct decon_context *)dev_id;
>> +       u32 val, clear_bit;
>> +
>> +       val = readl(ctx->regs + VIDINTCON1);
>> +
>> +       clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
>> +       if (val & clear_bit)
>> +               writel(clear_bit, ctx->regs + VIDINTCON1);
>> +
>> +       /* check the crtc is detached already from encoder */
>> +       if (ctx->pipe < 0 || !ctx->drm_dev)
>> +               goto out;
>> +
>> +       if (!ctx->i80_if) {
>> +               drm_handle_vblank(ctx->drm_dev, ctx->pipe);
>> +               exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
>> +
>> +               /* set wait vsync event to zero and wake up queue. */
>> +               if (atomic_read(&ctx->wait_vsync_event)) {
>> +                       atomic_set(&ctx->wait_vsync_event, 0);
>> +                       wake_up(&ctx->wait_vsync_queue);
>> +               }
>> +       }
>> +out:
>> +       return IRQ_HANDLED;
>> +}
>> +
>> +static int decon_bind(struct device *dev, struct device *master, void *data)
>> +{
>> +       struct decon_context *ctx = dev_get_drvdata(dev);
>> +       struct drm_device *drm_dev = data;
>> +       int ret;
>> +
>> +       ret = decon_ctx_initialize(ctx, drm_dev);
>> +       if (ret) {
>> +               DRM_ERROR("decon_ctx_initialize failed.\n");
>> +               return ret;
>> +       }
>> +
>> +       ctx->crtc = exynos_drm_crtc_create(drm_dev, ctx->pipe,
>> +                                          EXYNOS_DISPLAY_TYPE_LCD,
>> +                                          &decon_crtc_ops, ctx);
>> +       if (IS_ERR(ctx->crtc)) {
>> +               decon_ctx_remove(ctx);
>> +               return PTR_ERR(ctx->crtc);
>> +       }
>> +
>> +       if (ctx->display)
>> +               exynos_drm_create_enc_conn(drm_dev, ctx->display);
>> +
>> +       return 0;
>> +
>> +}
>> +
>> +static void decon_unbind(struct device *dev, struct device *master,
>> +                       void *data)
>> +{
>> +       struct decon_context *ctx = dev_get_drvdata(dev);
>> +
>> +       decon_dpms(ctx->crtc, DRM_MODE_DPMS_OFF);
>> +
>> +       if (ctx->display)
>> +               exynos_dpi_remove(ctx->display);
>> +
>> +       decon_ctx_remove(ctx);
>> +}
>> +
>> +static const struct component_ops decon_component_ops = {
>> +       .bind   = decon_bind,
>> +       .unbind = decon_unbind,
>> +};
>> +
>> +static int decon_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct decon_context *ctx;
>> +       struct device_node *i80_if_timings;
>> +       struct resource *res;
>> +       int ret;
>> +
>> +       if (!dev->of_node)
>> +               return -ENODEV;
>> +
>> +       ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +       if (!ctx)
>> +               return -ENOMEM;
>> +
>> +       ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CRTC,
>> +                                       EXYNOS_DISPLAY_TYPE_LCD);
>> +       if (ret)
>> +               return ret;
>> +
>> +       ctx->dev = dev;
>> +       ctx->suspended = true;
>> +
>> +       i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
>> +       if (i80_if_timings)
>> +               ctx->i80_if = true;
>> +       of_node_put(i80_if_timings);
>> +
>> +       ctx->regs = of_iomap(dev->of_node, 0);
>> +       if (IS_ERR(ctx->regs)) {
>> +               ret = PTR_ERR(ctx->regs);
>> +               goto err_del_component;
>> +       }
>> +
>> +       ctx->pclk = devm_clk_get(dev, "pclk_decon0");
>> +       if (IS_ERR(ctx->pclk)) {
>> +               dev_err(dev, "failed to get bus clock pclk\n");
>> +               ret = PTR_ERR(ctx->pclk);
>> +               goto err_iounmap;
>> +       }
>> +
>> +       ctx->aclk = devm_clk_get(dev, "aclk_decon0");
>> +       if (IS_ERR(ctx->aclk)) {
>> +               dev_err(dev, "failed to get bus clock aclk\n");
>> +               ret = PTR_ERR(ctx->aclk);
>> +               goto err_iounmap;
>> +       }
>> +
>> +       ctx->eclk = devm_clk_get(dev, "decon0_eclk");
>> +       if (IS_ERR(ctx->eclk)) {
>> +               dev_err(dev, "failed to get eclock\n");
>> +               ret = PTR_ERR(ctx->eclk);
>> +               goto err_iounmap;
>> +       }
>> +
>> +       ctx->vclk = devm_clk_get(dev, "decon0_vclk");
>> +       if (IS_ERR(ctx->vclk)) {
>> +               dev_err(dev, "failed to get vclock\n");
>> +               ret = PTR_ERR(ctx->vclk);
>> +               goto err_iounmap;
>> +       }
>> +
>> +       res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
>> +                                          ctx->i80_if ? "lcd_sys" : "vsync");
>> +       if (!res) {
>> +               dev_err(dev, "irq request failed.\n");
>> +               ret = -ENXIO;
>> +               goto err_iounmap;
>> +       }
>> +
>> +       ret = devm_request_irq(dev, res->start, decon_irq_handler,
>> +                                                       0, "drm_decon", ctx);
>> +       if (ret) {
>> +               dev_err(dev, "irq request failed.\n");
>> +               goto err_iounmap;
>> +       }
>> +
>> +       init_waitqueue_head(&ctx->wait_vsync_queue);
>> +       atomic_set(&ctx->wait_vsync_event, 0);
>> +
>> +       platform_set_drvdata(pdev, ctx);
>> +
>> +       ctx->display = exynos_dpi_probe(dev);
>> +       if (IS_ERR(ctx->display)) {
>> +               ret = PTR_ERR(ctx->display);
>> +               goto err_iounmap;
>> +       }
>> +
>> +       pm_runtime_enable(dev);
>> +
>> +       ret = component_add(dev, &decon_component_ops);
>> +       if (ret)
>> +               goto err_disable_pm_runtime;
>> +
>> +       return ret;
>> +
>> +err_disable_pm_runtime:
>> +       pm_runtime_disable(dev);
>> +
>> +err_iounmap:
>> +       iounmap(ctx->regs);
>> +
>> +err_del_component:
>> +       exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CRTC);
>> +       return ret;
>> +}
>> +
>> +static int decon_remove(struct platform_device *pdev)
>> +{
>> +       struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
>> +
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       iounmap(ctx->regs);
>> +
>> +       component_del(&pdev->dev, &decon_component_ops);
>> +       exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
>> +
>> +       return 0;
>> +}
>> +
>> +struct platform_driver decon_driver = {
>> +       .probe          = decon_probe,
>> +       .remove         = decon_remove,
>> +       .driver         = {
>> +               .name   = "exynos-decon",
>> +               .of_match_table = decon_driver_dt_match,
>> +       },
>> +};
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index 1bcbe07..a2ab406 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -556,6 +556,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
>>  #ifdef CONFIG_DRM_EXYNOS_FIMD
>>         &fimd_driver,
>>  #endif
>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>> +       &decon_driver,
>> +#endif
>>  #ifdef CONFIG_DRM_EXYNOS_DP
>>         &dp_driver,
>>  #endif
>> @@ -612,6 +615,7 @@ static const char * const strings[] = {
>>         "samsung,exynos3",
>>         "samsung,exynos4",
>>         "samsung,exynos5",
>> +       "samsung,exynos7",
>>  };
>>
>>  static struct platform_driver exynos_drm_platform_driver = {
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> index d490b49..dff1d06 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> @@ -352,6 +352,7 @@ void exynos_drm_component_del(struct device *dev,
>>                                 enum exynos_drm_device_type dev_type);
>>
>>  extern struct platform_driver fimd_driver;
>> +extern struct platform_driver decon_driver;
>>  extern struct platform_driver dp_driver;
>>  extern struct platform_driver dsi_driver;
>>  extern struct platform_driver mixer_driver;
>> diff --git a/include/video/exynos7_decon.h b/include/video/exynos7_decon.h
>> new file mode 100644
>> index 0000000..a62b11b
>> --- /dev/null
>> +++ b/include/video/exynos7_decon.h
>> @@ -0,0 +1,349 @@
>> +/* include/video/exynos7_decon.h
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + * Author: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +/* VIDCON0 */
>> +#define VIDCON0                                        0x00
>> +
>> +#define VIDCON0_SWRESET                                (1 << 28)
>> +#define VIDCON0_DECON_STOP_STATUS              (1 << 2)
>> +#define VIDCON0_ENVID                          (1 << 1)
>> +#define VIDCON0_ENVID_F                                (1 << 0)
>> +
>> +/* VIDOUTCON0 */
>> +#define VIDOUTCON0                             0x4
>> +
>> +#define VIDOUTCON0_DUAL_MASK                   (0x3 << 24)
>> +#define VIDOUTCON0_DUAL_ON                     (0x3 << 24)
>> +#define VIDOUTCON0_DISP_IF_1_ON                        (0x2 << 24)
>> +#define VIDOUTCON0_DISP_IF_0_ON                        (0x1 << 24)
>> +#define VIDOUTCON0_DUAL_OFF                    (0x0 << 24)
>> +#define VIDOUTCON0_IF_SHIFT                    23
>> +#define VIDOUTCON0_IF_MASK                     (0x1 << 23)
>> +#define VIDOUTCON0_RGBIF                       (0x0 << 23)
>> +#define VIDOUTCON0_I80IF                       (0x1 << 23)
>> +
>> +/* VIDCON3 */
>> +#define VIDCON3                                        0x8
>> +
>> +/* VIDCON4 */
>> +#define VIDCON4                                        0xC
>> +#define VIDCON4_FIFOCNT_START_EN               (1 << 0)
>> +
>> +/* VCLKCON0 */
>> +#define VCLKCON0                               0x10
>> +#define VCLKCON0_CLKVALUP                      (1 << 8)
>> +#define VCLKCON0_VCLKFREE                      (1 << 0)
>> +
>> +/* VCLKCON */
>> +#define VCLKCON1                               0x14
>> +#define VCLKCON1_CLKVAL_NUM_VCLK(val)          (((val) & 0xff) << 0)
>> +#define VCLKCON2                               0x18
>> +
>> +/* SHADOWCON */
>> +#define SHADOWCON                              0x30
>> +
>> +#define SHADOWCON_WINx_PROTECT(_win)           (1 << (10 + (_win)))
>> +
>> +/* WINCONx */
>> +#define WINCON(_win)                           (0x50 + ((_win) * 4))
>> +
>> +#define WINCONx_BUFSTATUS                      (0x3 << 30)
>> +#define WINCONx_BUFSEL_MASK                    (0x3 << 28)
>> +#define WINCONx_BUFSEL_SHIFT                   28
>> +#define WINCONx_TRIPLE_BUF_MODE                        (0x1 << 18)
>> +#define WINCONx_DOUBLE_BUF_MODE                        (0x0 << 18)
>> +#define WINCONx_BURSTLEN_16WORD                        (0x0 << 11)
>> +#define WINCONx_BURSTLEN_8WORD                 (0x1 << 11)
>> +#define WINCONx_BURSTLEN_MASK                  (0x1 << 11)
>> +#define WINCONx_BURSTLEN_SHIFT                 11
>> +#define WINCONx_BLD_PLANE                      (0 << 8)
>> +#define WINCONx_BLD_PIX                                (1 << 8)
>> +#define WINCONx_ALPHA_MUL                      (1 << 7)
>> +
>> +#define WINCONx_BPPMODE_MASK                   (0xf << 2)
>> +#define WINCONx_BPPMODE_SHIFT                  2
>> +#define WINCONx_BPPMODE_16BPP_565              (0x8 << 2)
>> +#define WINCONx_BPPMODE_24BPP_BGRx             (0x7 << 2)
>> +#define WINCONx_BPPMODE_24BPP_RGBx             (0x6 << 2)
>> +#define WINCONx_BPPMODE_24BPP_xBGR             (0x5 << 2)
>> +#define WINCONx_BPPMODE_24BPP_xRGB             (0x4 << 2)
>> +#define WINCONx_BPPMODE_32BPP_BGRA             (0x3 << 2)
>> +#define WINCONx_BPPMODE_32BPP_RGBA             (0x2 << 2)
>> +#define WINCONx_BPPMODE_32BPP_ABGR             (0x1 << 2)
>> +#define WINCONx_BPPMODE_32BPP_ARGB             (0x0 << 2)
>> +#define WINCONx_ALPHA_SEL                      (1 << 1)
>> +#define WINCONx_ENWIN                          (1 << 0)
>> +
>> +#define WINCON1_ALPHA_MUL_F                    (1 << 7)
>> +#define WINCON2_ALPHA_MUL_F                    (1 << 7)
>> +#define WINCON3_ALPHA_MUL_F                    (1 << 7)
>> +#define WINCON4_ALPHA_MUL_F                    (1 << 7)
>> +
>> +/*  VIDOSDxH: The height for the OSD image(READ ONLY)*/
>> +#define VIDOSD_H(_x)                           (0x80 + ((_x) * 4))
>> +
>> +/* Frame buffer start addresses: VIDWxxADD0n */
>> +#define VIDW_BUF_START(_win)                   (0x80 + ((_win) * 0x10))
>> +#define VIDW_BUF_START1(_win)                  (0x84 + ((_win) * 0x10))
>> +#define VIDW_BUF_START2(_win)                  (0x88 + ((_win) * 0x10))
>> +
>> +#define VIDW_WHOLE_X(_win)                     (0x0130 + ((_win) * 8))
>> +#define VIDW_WHOLE_Y(_win)                     (0x0134 + ((_win) * 8))
>> +#define VIDW_OFFSET_X(_win)                    (0x0170 + ((_win) * 8))
>> +#define VIDW_OFFSET_Y(_win)                    (0x0174 + ((_win) * 8))
>> +#define VIDW_BLKOFFSET(_win)                   (0x01B0 + ((_win) * 4))
>> +#define VIDW_BLKSIZE(win)                      (0x0200 + ((_win) * 4))
>> +
>> +/* Interrupt controls register */
>> +#define VIDINTCON2                             0x228
>> +
>> +#define VIDINTCON1_INTEXTRA1_EN                        (1 << 1)
>> +#define VIDINTCON1_INTEXTRA0_EN                        (1 << 0)
>> +
>> +/* Interrupt controls and status register */
>> +#define VIDINTCON3                             0x22C
>> +
>> +#define VIDINTCON1_INTEXTRA1_PEND              (1 << 1)
>> +#define VIDINTCON1_INTEXTRA0_PEND              (1 << 0)
>> +
>> +/* VIDOSDxA ~ VIDOSDxE */
>> +#define VIDOSD_BASE                            0x230
>> +
>> +#define OSD_STRIDE                             0x20
>> +
>> +#define VIDOSD_A(_win)                         (VIDOSD_BASE + \
>> +                                               ((_win) * OSD_STRIDE) + 0x00)
>> +#define VIDOSD_B(_win)                         (VIDOSD_BASE + \
>> +                                               ((_win) * OSD_STRIDE) + 0x04)
>> +#define VIDOSD_C(_win)                         (VIDOSD_BASE + \
>> +                                               ((_win) * OSD_STRIDE) + 0x08)
>> +#define VIDOSD_D(_win)                         (VIDOSD_BASE + \
>> +                                               ((_win) * OSD_STRIDE) + 0x0C)
>> +#define VIDOSD_E(_win)                         (VIDOSD_BASE + \
>> +                                               ((_win) * OSD_STRIDE) + 0x10)
>> +
>> +#define VIDOSDxA_TOPLEFT_X_MASK                        (0x1fff << 13)
>> +#define VIDOSDxA_TOPLEFT_X_SHIFT               13
>> +#define VIDOSDxA_TOPLEFT_X_LIMIT               0x1fff
>> +#define VIDOSDxA_TOPLEFT_X(_x)                 (((_x) & 0x1fff) << 13)
>> +
>> +#define VIDOSDxA_TOPLEFT_Y_MASK                        (0x1fff << 0)
>> +#define VIDOSDxA_TOPLEFT_Y_SHIFT               0
>> +#define VIDOSDxA_TOPLEFT_Y_LIMIT               0x1fff
>> +#define VIDOSDxA_TOPLEFT_Y(_x)                 (((_x) & 0x1fff) << 0)
>> +
>> +#define VIDOSDxB_BOTRIGHT_X_MASK               (0x1fff << 13)
>> +#define VIDOSDxB_BOTRIGHT_X_SHIFT              13
>> +#define VIDOSDxB_BOTRIGHT_X_LIMIT              0x1fff
>> +#define VIDOSDxB_BOTRIGHT_X(_x)                        (((_x) & 0x1fff) << 13)
>> +
>> +#define VIDOSDxB_BOTRIGHT_Y_MASK               (0x1fff << 0)
>> +#define VIDOSDxB_BOTRIGHT_Y_SHIFT              0
>> +#define VIDOSDxB_BOTRIGHT_Y_LIMIT              0x1fff
>> +#define VIDOSDxB_BOTRIGHT_Y(_x)                        (((_x) & 0x1fff) << 0)
>> +
>> +#define VIDOSDxC_ALPHA0_R_F(_x)                        (((_x) & 0xFF) << 16)
>> +#define VIDOSDxC_ALPHA0_G_F(_x)                        (((_x) & 0xFF) << 8)
>> +#define VIDOSDxC_ALPHA0_B_F(_x)                        (((_x) & 0xFF) << 0)
>> +
>> +#define VIDOSDxD_ALPHA1_R_F(_x)                        (((_x) & 0xFF) << 16)
>> +#define VIDOSDxD_ALPHA1_G_F(_x)                        (((_x) & 0xFF) << 8)
>> +#define VIDOSDxD_ALPHA1_B_F(_x)                        (((_x) & 0xFF) >> 0)
>> +
>> +/* Window MAP (Color map) */
>> +#define WINxMAP(_win)                          (0x340 + ((_win) * 4))
>> +
>> +#define WINxMAP_MAP                            (1 << 24)
>> +#define WINxMAP_MAP_COLOUR_MASK                        (0xffffff << 0)
>> +#define WINxMAP_MAP_COLOUR_SHIFT               0
>> +#define WINxMAP_MAP_COLOUR_LIMIT               0xffffff
>> +#define WINxMAP_MAP_COLOUR(_x)                 ((_x) << 0)
>> +
>> +/* Window colour-key control registers */
>> +#define WKEYCON                                        0x370
>> +
>> +#define WKEYCON0                               0x00
>> +#define WKEYCON1                               0x04
>> +#define WxKEYCON0_KEYBL_EN                     (1 << 26)
>> +#define WxKEYCON0_KEYEN_F                      (1 << 25)
>> +#define WxKEYCON0_DIRCON                       (1 << 24)
>> +#define WxKEYCON0_COMPKEY_MASK                 (0xffffff << 0)
>> +#define WxKEYCON0_COMPKEY_SHIFT                        0
>> +#define WxKEYCON0_COMPKEY_LIMIT                        0xffffff
>> +#define WxKEYCON0_COMPKEY(_x)                  ((_x) << 0)
>> +#define WxKEYCON1_COLVAL_MASK                  (0xffffff << 0)
>> +#define WxKEYCON1_COLVAL_SHIFT                 0
>> +#define WxKEYCON1_COLVAL_LIMIT                 0xffffff
>> +#define WxKEYCON1_COLVAL(_x)                   ((_x) << 0)
>> +
>> +/* color key control register for hardware window 1 ~ 4. */
>> +#define WKEYCON0_BASE(x)               ((WKEYCON + WKEYCON0) + ((x - 1) * 8))
>> +/* color key value register for hardware window 1 ~ 4. */
>> +#define WKEYCON1_BASE(x)               ((WKEYCON + WKEYCON1) + ((x - 1) * 8))
>> +
>> +/* Window KEY Alpha value */
>> +#define WxKEYALPHA(_win)                       (0x3A0 + (((_win) - 1) * 0x4))
>> +
>> +#define Wx_KEYALPHA_R_F_SHIFT                  16
>> +#define Wx_KEYALPHA_G_F_SHIFT                  8
>> +#define Wx_KEYALPHA_B_F_SHIFT                  0
>> +
>> +/* Blending equation */
>> +#define BLENDE(_win)                           (0x03C0 + ((_win) * 4))
>> +#define BLENDE_COEF_ZERO                       0x0
>> +#define BLENDE_COEF_ONE                                0x1
>> +#define BLENDE_COEF_ALPHA_A                    0x2
>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_A          0x3
>> +#define BLENDE_COEF_ALPHA_B                    0x4
>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_B          0x5
>> +#define BLENDE_COEF_ALPHA0                     0x6
>> +#define BLENDE_COEF_A                          0xA
>> +#define BLENDE_COEF_ONE_MINUS_A                        0xB
>> +#define BLENDE_COEF_B                          0xC
>> +#define BLENDE_COEF_ONE_MINUS_B                        0xD
>> +#define BLENDE_Q_FUNC(_v)                      ((_v) << 18)
>> +#define BLENDE_P_FUNC(_v)                      ((_v) << 12)
>> +#define BLENDE_B_FUNC(_v)                      ((_v) << 6)
>> +#define BLENDE_A_FUNC(_v)                      ((_v) << 0)
>> +
>> +/* Blending equation control */
>> +#define BLENDCON                               0x3D8
>> +#define BLENDCON_NEW_MASK                      (1 << 0)
>> +#define BLENDCON_NEW_8BIT_ALPHA_VALUE          (1 << 0)
>> +#define BLENDCON_NEW_4BIT_ALPHA_VALUE          (0 << 0)
>> +
>> +/* Interrupt control register */
>> +#define VIDINTCON0                             0x500
>> +
>> +#define VIDINTCON0_WAKEUP_MASK                 (0x3f << 26)
>> +#define VIDINTCON0_INTEXTRAEN                  (1 << 21)
>> +
>> +#define VIDINTCON0_FRAMESEL0_SHIFT             15
>> +#define VIDINTCON0_FRAMESEL0_MASK              (0x3 << 15)
>> +#define VIDINTCON0_FRAMESEL0_BACKPORCH         (0x0 << 15)
>> +#define VIDINTCON0_FRAMESEL0_VSYNC             (0x1 << 15)
>> +#define VIDINTCON0_FRAMESEL0_ACTIVE            (0x2 << 15)
>> +#define VIDINTCON0_FRAMESEL0_FRONTPORCH                (0x3 << 15)
>> +
>> +#define VIDINTCON0_INT_FRAME                   (1 << 11)
>> +
>> +#define VIDINTCON0_FIFOLEVEL_MASK              (0x7 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_SHIFT             3
>> +#define VIDINTCON0_FIFOLEVEL_EMPTY             (0x0 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_TO25PC            (0x1 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_TO50PC            (0x2 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_FULL              (0x4 << 3)
>> +
>> +#define VIDINTCON0_FIFOSEL_MAIN_EN             (1 << 1)
>> +#define VIDINTCON0_INT_FIFO                    (1 << 1)
>> +
>> +#define VIDINTCON0_INT_ENABLE                  (1 << 0)
>> +
>> +/* Interrupt controls and status register */
>> +#define VIDINTCON1                             0x504
>> +
>> +#define VIDINTCON1_INT_EXTRA                   (1 << 3)
>> +#define VIDINTCON1_INT_I80                     (1 << 2)
>> +#define VIDINTCON1_INT_FRAME                   (1 << 1)
>> +#define VIDINTCON1_INT_FIFO                    (1 << 0)
>> +
>> +/* VIDCON1 */
>> +#define VIDCON1(_x)                            (0x0600 + ((_x) * 0x50))
>> +#define VIDCON1_LINECNT_GET(_v)                        (((_v) >> 17) & 0x1fff)
>> +#define VIDCON1_VCLK_MASK                      (0x3 << 9)
>> +#define VIDCON1_VCLK_HOLD                      (0x0 << 9)
>> +#define VIDCON1_VCLK_RUN                       (0x1 << 9)
>> +#define VIDCON1_VCLK_RUN_VDEN_DISABLE          (0x3 << 9)
>> +#define VIDCON1_RGB_ORDER_O_MASK               (0x7 << 4)
>> +#define VIDCON1_RGB_ORDER_O_RGB                        (0x0 << 4)
>> +#define VIDCON1_RGB_ORDER_O_GBR                        (0x1 << 4)
>> +#define VIDCON1_RGB_ORDER_O_BRG                        (0x2 << 4)
>> +#define VIDCON1_RGB_ORDER_O_BGR                        (0x4 << 4)
>> +#define VIDCON1_RGB_ORDER_O_RBG                        (0x5 << 4)
>> +#define VIDCON1_RGB_ORDER_O_GRB                        (0x6 << 4)
>> +
>> +/* VIDTCON0 */
>> +#define VIDTCON0                               0x610
>> +
>> +#define VIDTCON0_VBPD_MASK                     (0xffff << 16)
>> +#define VIDTCON0_VBPD_SHIFT                    16
>> +#define VIDTCON0_VBPD_LIMIT                    0xffff
>> +#define VIDTCON0_VBPD(_x)                      ((_x) << 16)
>> +
>> +#define VIDTCON0_VFPD_MASK                     (0xffff << 0)
>> +#define VIDTCON0_VFPD_SHIFT                    0
>> +#define VIDTCON0_VFPD_LIMIT                    0xffff
>> +#define VIDTCON0_VFPD(_x)                      ((_x) << 0)
>> +
>> +/* VIDTCON1 */
>> +#define VIDTCON1                               0x614
>> +
>> +#define VIDTCON1_VSPW_MASK                     (0xffff << 16)
>> +#define VIDTCON1_VSPW_SHIFT                    16
>> +#define VIDTCON1_VSPW_LIMIT                    0xffff
>> +#define VIDTCON1_VSPW(_x)                      ((_x) << 16)
>> +
>> +/* VIDTCON2 */
>> +#define VIDTCON2                               0x618
>> +
>> +#define VIDTCON2_HBPD_MASK                     (0xffff << 16)
>> +#define VIDTCON2_HBPD_SHIFT                    16
>> +#define VIDTCON2_HBPD_LIMIT                    0xffff
>> +#define VIDTCON2_HBPD(_x)                      ((_x) << 16)
>> +
>> +#define VIDTCON2_HFPD_MASK                     (0xffff << 0)
>> +#define VIDTCON2_HFPD_SHIFT                    0
>> +#define VIDTCON2_HFPD_LIMIT                    0xffff
>> +#define VIDTCON2_HFPD(_x)                      ((_x) << 0)
>> +
>> +/* VIDTCON3 */
>> +#define VIDTCON3                               0x61C
>> +
>> +#define VIDTCON3_HSPW_MASK                     (0xffff << 16)
>> +#define VIDTCON3_HSPW_SHIFT                    16
>> +#define VIDTCON3_HSPW_LIMIT                    0xffff
>> +#define VIDTCON3_HSPW(_x)                      ((_x) << 16)
>> +
>> +/* VIDTCON4 */
>> +#define VIDTCON4                               0x620
>> +
>> +#define VIDTCON4_LINEVAL_MASK                  (0xfff << 16)
>> +#define VIDTCON4_LINEVAL_SHIFT                 16
>> +#define VIDTCON4_LINEVAL_LIMIT                 0xfff
>> +#define VIDTCON4_LINEVAL(_x)                   (((_x) & 0xfff) << 16)
>> +
>> +#define VIDTCON4_HOZVAL_MASK                   (0xfff << 0)
>> +#define VIDTCON4_HOZVAL_SHIFT                  0
>> +#define VIDTCON4_HOZVAL_LIMIT                  0xfff
>> +#define VIDTCON4_HOZVAL(_x)                    (((_x) & 0xfff) << 0)
>> +
>> +/* LINECNT OP THRSHOLD*/
>> +#define LINECNT_OP_THRESHOLD                   0x630
>> +
>> +/* CRCCTRL */
>> +#define CRCCTRL                                        0x6C8
>> +#define CRCCTRL_CRCCLKEN                       (0x1 << 2)
>> +#define CRCCTRL_CRCSTART_F                     (0x1 << 1)
>> +#define CRCCTRL_CRCEN                          (0x1 << 0)
>> +
>> +/* DECON_CMU */
>> +#define DECON_CMU                              0x704
>> +
>> +#define DECON_CMU_ALL_CLKGATE_ENABLE           0x3
>> +#define DECON_CMU_SE_CLKGATE_ENABLE            (0x1 << 2)
>> +#define DECON_CMU_SFR_CLKGATE_ENABLE           (0x1 << 1)
>> +#define DECON_CMU_MEM_CLKGATE_ENABLE           (0x1 << 0)
>> +
>> +/* DECON_UPDATE */
>> +#define DECON_UPDATE                           0x710
>> +
>> +#define DECON_UPDATE_SLAVE_SYNC                        (1 << 4)
>> +#define DECON_UPDATE_STANDALONE_F              (1 << 0)
>> --
>> 1.7.9.5
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux