Many WLAN attached to a SDIO/MMC interface, needs more than one pin for their reset sequence. For example, is very common for chips to have two pins: one for reset and one for power enable. This patch adds support for more reset pins to the pwrseq_simple driver and instead hardcoding a fixed number, it uses the of_gpio_named_count() since the MMC power sequence is only built when CONFIG_OF is enabled. Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> --- drivers/mmc/core/pwrseq_simple.c | 54 ++++++++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 0958c696137f..9e51fe1051c5 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/of_gpio.h> #include <linux/gpio/consumer.h> #include <linux/mmc/host.h> @@ -19,34 +20,44 @@ struct mmc_pwrseq_simple { struct mmc_pwrseq pwrseq; - struct gpio_desc *reset_gpio; + struct gpio_desc **reset_gpio; + int nr_gpios; }; static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); + int i; - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR(pwrseq->reset_gpio[i])) + gpiod_set_value_cansleep(pwrseq->reset_gpio[i], 1); } static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); + int i; - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR(pwrseq->reset_gpio[i])) + gpiod_set_value_cansleep(pwrseq->reset_gpio[i], 0); } static void mmc_pwrseq_simple_free(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); + int i; - if (!IS_ERR(pwrseq->reset_gpio)) - gpiod_put(pwrseq->reset_gpio); + if (pwrseq->nr_gpios > 0) { + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR(pwrseq->reset_gpio[i])) + gpiod_put(pwrseq->reset_gpio[i]); + kfree(pwrseq->reset_gpio); + } kfree(pwrseq); host->pwrseq = NULL; @@ -63,17 +74,27 @@ int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev) { struct mmc_pwrseq_simple *pwrseq; int ret = 0; + int i; pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple), GFP_KERNEL); if (!pwrseq) return -ENOMEM; - pwrseq->reset_gpio = gpiod_get_index(dev, "reset", 0, GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpio) && - PTR_ERR(pwrseq->reset_gpio) != -ENOENT && - PTR_ERR(pwrseq->reset_gpio) != -ENOSYS) { - ret = PTR_ERR(pwrseq->reset_gpio); - goto free; + pwrseq->nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios"); + if (pwrseq->nr_gpios > 0) { + pwrseq->reset_gpio = kzalloc(sizeof(struct gpio_desc *) * + pwrseq->nr_gpios, GFP_KERNEL); + + for (i = 0; i < pwrseq->nr_gpios; i++) { + pwrseq->reset_gpio[i] = gpiod_get_index(dev, "reset", i, + GPIOD_OUT_HIGH); + if (IS_ERR(pwrseq->reset_gpio[i]) && + PTR_ERR(pwrseq->reset_gpio[i]) != -ENOENT && + PTR_ERR(pwrseq->reset_gpio[i]) != -ENOSYS) { + ret = PTR_ERR(pwrseq->reset_gpio[i]); + goto free; + } + } } pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; @@ -81,6 +102,13 @@ int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev) return 0; free: + if (pwrseq->nr_gpios > 0) { + for (i = 0; i < pwrseq->nr_gpios; i++) + if (!IS_ERR_OR_NULL(pwrseq->reset_gpio[i])) + gpiod_put(pwrseq->reset_gpio[i]); + kfree(pwrseq->reset_gpio); + } + kfree(pwrseq); return ret; } -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html