Re: [PATCH 2/2] net: stmmac: add fixed_phy and phy_addr support using DT file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 22/01/2015 18:41, Ming Lei a écrit :
> From: Byungho An <bh74.an@xxxxxxxxxxx>
> 
> This patch adds codes for DT file support, fixed_phy and phy_addr 
> can be set in DT file.
> 
> Signed-off-by: Byungho An <bh74.an@xxxxxxxxxxx> (bypass check for
> fixed phy) Signed-off-by: Ming Lei<ming.lei@xxxxxxxxxxxxx> --- 
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |    5 ++++- 
> .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |    7 +++++++ 2
> files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index
> 8c6b7c16..ddb4351 100644 ---
> a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -847,8
> +847,11 @@ static int stmmac_init_phy(struct net_device *dev) * 0
> rather than 0xffff. Catch this here and treat 0 as a non-existent *
> device as well. * Note: phydev->phy_id is the result of reading the
> UID PHY registers. +	 * But phy_id returned from fixed phy is
> always zero, so bypass the +	 * check for fixed phy. */ -	if
> (phydev->phy_id == 0) { +	if (phydev->phy_id == 0 &&
> (!priv->plat->phy_bus_name || +
> strcmp(priv->plat->phy_bus_name,"fixed"))) { 
> phy_disconnect(phydev); return -ENODEV; } diff --git
> a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index
> 879e29f..4f11491 100644 ---
> a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -128,6
> +128,7 @@ static int stmmac_probe_config_dt(struct platform_device
> *pdev, struct device_node *np = pdev->dev.of_node; struct
> stmmac_dma_cfg *dma_cfg; const struct of_device_id *device; +	u32
> phy_addr;
> 
> if (!np) return -ENODEV; @@ -217,6 +218,12 @@ static int
> stmmac_probe_config_dt(struct platform_device *pdev, plat->pmt =
> 1; }
> 
> +	if (of_find_property(np, "fixed_phy", NULL)) { +
> plat->phy_bus_name = "fixed"; +		of_property_read_u32(np,
> "phy_addr", &phy_addr); +		plat->phy_addr = phy_addr; +	}

Humm, same here, it would look like you could use the existing Device
Tree helpers for parsing and registering a fixed PHY here, provided
that you use the proper binding though.

BTW, Ming Lei's email is bouncing, do we have an updated email he
could be contacted with?

> + if (of_device_is_compatible(np, "snps,dwmac-3.610") || 
> of_device_is_compatible(np, "snps,dwmac-3.710")) { plat->enh_desc =
> 1;
> 


-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux