Hi,
If you want to enable the hs400 mode, need to add "mmc-hs400-1_8v" or "mmc-hs400-1_2v".
But this patch didn't add them. do you have any other plan?
On 01/14/2015 07:30 PM, Alim Akhtar wrote:
> From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
>
> HS400 timing values are added for SMDK5420, exynos5420-peach-pit
> and exynos5800-peach-pi boards.
> This also adds RCLK GPIO line, this gpio should be in pull-down
> state.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> [Alim: addressed review comments]
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +++-
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 4 +++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +++-
> 4 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 9a050e1..7ffaba8 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -569,8 +569,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> };
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index ba686e4..8b15316 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -201,6 +201,13 @@
> samsung,pin-drv = <3>;
> };
>
> + sd0_rclk: sd0-rclk {
I know it used to "sd0_rdqs", not "sd0_rclk".
Change name.
Best Regards,
Jaehoon Chung
> + samsung,pins = "gpc0-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> sd1_cmd: sd1-cmd {
> samsung,pins = "gpc1-1";
> samsung,pin-function = <2>;
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 8be3d7b..5290e79 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -80,8 +80,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> cap-mmc-highspeed;
> };
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index e8fdda8..fa1c858 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -557,8 +557,10 @@
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <0 4>;
> samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 2>;
> + read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
> bus-width = <8>;
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
