Define videoports and use endpoints to describe the connection between
the encoder, bridge and the panel, instead of using phandles.
Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Tested-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
Tested-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Tested-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
Tested-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 31 ++++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index c47bb70..ec86d95 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -118,6 +118,12 @@
compatible = "auo,b116xw03";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
};
};
@@ -137,7 +143,14 @@
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 0>;
- bridge = <&ps8625>;
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
};
&fimd {
@@ -595,8 +608,22 @@
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
lane-count = <2>;
- panel = <&panel>;
use-external-pwm;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
