[PATCH 0/2] Input: atmel_mxt_ts - Add support for T100 multi-touch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Dmitry,

There are different multi-touch protocols used by Atmel maXTouch touchscreen
chips. Old chips use the T9 multi-touch object type while newer chips use the
T100 multi-touch object type. The Atmel touch driver currently only supports
the former so this series add support for the later.

The series is composed of the following patches:

Nick Dyer (1):
  Input: atmel_mxt_ts - Implement support for T100 touch object

Sjoerd Simons (1):
  Input: atmel_mxt_ts - Split out touchpad initialisation logic

 drivers/input/touchscreen/atmel_mxt_ts.c | 307 +++++++++++++++++++++++++++----
 1 file changed, 270 insertions(+), 37 deletions(-)

Patch #1 adds the support for the T100 touch object and patch #2 is a
cleanup to simplify the driver's input device initialization function.

The series were tested on an Exynos 5420 Peach Pit (T9) and an Exynos
5800 Peach Pi (T100) using evtest.

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux