Re: [PATCH] dmaengine: pl330: Set residue in tx_status callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/02/2014 06:38 AM, Padma Venkat wrote:
Hi Vinod/Lars,

On 11/26/14, Padmavathi Venna <padma.v@xxxxxxxxxxx> wrote:
Fill txstate.residue with the amount of bytes remaining in the current
transfer if the transfer is not complete.  This will be of particular
use to i2s DMA transfers, providing more accurate hw_ptr values to ASoC.

I had taken the code from Dylan Reid <dgreid@xxxxxxxxxxxx> patch from the
below link and modified according to the current dmaengine framework.
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/23007

Cc: Dylan Reid <dgreid@xxxxxxxxxxxx>
Signed-off-by: Padmavathi Venna <padma.v@xxxxxxxxxxx>
---

This patch has been tested for audio playback on exynos5420 peach-pit.

  drivers/dma/pl330.c |   67
+++++++++++++++++++++++++++++++++++++++++++++++++-
  1 files changed, 65 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index b7493d2..db880ae 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2182,11 +2182,74 @@ static void pl330_free_chan_resources(struct
dma_chan *chan)
  	pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
  }

+static inline int
+pl330_src_addr_in_desc(struct dma_pl330_desc *desc, unsigned int sar)
+{
+	return ((desc->px.src_addr <= sar) &&
+		(sar <= (desc->px.src_addr + desc->px.bytes)));
+}
+
+static inline int
+pl330_dst_addr_in_desc(struct dma_pl330_desc *desc, unsigned int dar)
+{
+	return ((desc->px.dst_addr <= dar) &&
+		(dar <= (desc->px.dst_addr + desc->px.bytes)));
+}
+
  static enum dma_status
  pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
  		 struct dma_tx_state *txstate)
  {
-	return dma_cookie_status(chan, cookie, txstate);
+	dma_addr_t sar, dar;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	void __iomem *regs = pch->dmac->base;
+	struct pl330_thread *thrd = pch->thread;
+	struct dma_pl330_desc *desc;
+	unsigned int residue = 0;
+	unsigned long flags;
+	bool first = true;
+	dma_cookie_t first_c, current_c;
+	dma_cookie_t used;
+	enum dma_status ret;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE || !txstate)
+		return ret;
+
+	used = txstate->used;
+
+	spin_lock_irqsave(&pch->lock, flags);
+	sar = readl(regs + SA(thrd->id));
+	dar = readl(regs + DA(thrd->id));
+
+	list_for_each_entry(desc, &pch->work_list, node) {
+		if (desc->status == BUSY) {
+			current_c = desc->txd.cookie;
+			if (first) {
+				first_c = desc->txd.cookie;
+				first = false;
+			}
+
+			if (first_c < current_c)
+				residue += desc->px.bytes;
+			else {
+				if (desc->rqcfg.src_inc && pl330_src_addr_in_desc(desc, sar)) {
+					residue += desc->px.bytes;
+					residue -= sar - desc->px.src_addr;
+				} else if (desc->rqcfg.dst_inc && pl330_dst_addr_in_desc(desc, dar)) {
+					residue += desc->px.bytes;
+					residue -= dar - desc->px.dst_addr;
+				}
+			}
+		} else if (desc->status == PREP)
+			residue += desc->px.bytes;
+
+		if (desc->txd.cookie == used)
+			break;
+	}
+	spin_unlock_irqrestore(&pch->lock, flags);
+	dma_set_residue(txstate, residue);
+	return ret;
  }

  static void pl330_issue_pending(struct dma_chan *chan)
@@ -2631,7 +2694,7 @@ static int pl330_dma_device_slave_caps(struct dma_chan
*dchan,
  	caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
  	caps->cmd_pause = false;
  	caps->cmd_terminate = true;
-	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;

  	return 0;
  }

Any comment on this patch?

Well it doesn't break audio, but I don't think it has the correct haviour for all cases yet.

Again, the semantics are that it should return the progress of the transfer for which the allocation function returned the cookie that is passe to this function. You have to consider that there might be multiple different descriptors submitted and in the work list, not just the one we want to know the status of. The big problem with the pl330 driver is that the current structure of the driver makes it not so easy to implement the residue reporting correctly.

- Lars

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux